Product#: MD2594

1962-74 Mopar B / E-Body; Shock Tower Brace; Passenger Side; EDP Coated

This reproduction shock tower brace is designed for use with 1962-74 Dodge and Plymouth B and E body models. Each shock tower breace is manufactured in stamped steel to original factory specifications featuring correct...


Product#: MD2593

1962-74 Mopar B / E-Body; Shock Tower Brace; Drivers Side

This reproduction shock tower brace is designed for use with 1962-74 Dodge and Plymouth B and E body models. Each shock tower breace is manufactured in stamped steel to original factory specifications featuring correct...


Product#: PM1014

1970-74 Plymouth Cuda E-Body Level 1 Chassis Stiffering Set

The factory engineers added stiffening to some ares of the E-Bodies, so they recognized the benefits of the bracing 40+ years ago. Any car will benefit from the additional chassis (unibody) stiffening, especially if you are...


Product#: H4011S

1970-74 Plymouth Barracuda / "Cuda Hotchkis Weld-In Sub-Frame Connectors

One of the most important additions to your high performance classic Mopar is installing sub-frame connectors. Hotchkis Performance sub-frame connectors bridge the gap between the front frame rails and the rear frame rails,...


Product#: PM1502

1970-74 Mopar E-Body Front & Rear Torque Box 4-Piece Set

1970-74 Mopar E-Body torque boxes are designed to add strength to your Mopar unibody in several critical areas. The factory added OEM torque boxes on the high-HP, high torque cars and convertibles. Hemi cars, six-pak cars...


Product#: PM1103

1970-74 Plymouth Cuda Frame Connectors

These frame rail connectors are precision CNC Machine cut and CNC bent to form a 3 sided box. When they are welded to the floorpan of the Mopar Unibody, they create a complete boxed in frame rail section that is stronger than...


Product#: PM1302

1970-74 Dodge/Plymouth E-Body Core Support Stiffener

1970-74 Mopar E-Body Core Support Stiffener. Front Lower Core Support Brace installs between the front frame rails, under the factory radiator. Can replace the factory thin sheetmetal support or can be installed on top...


Product#: H14366BK

1966-74 Mopar B / E-Body - Hotchkis Sport Suspension Strut Rod Protective Boot Kit (Pair)

Hotchkis protective boot kit is designed to guard and protect the heim joints used on the Hotchkis adjustable strut rods H14366. This kit contains (2) high quality rubber protective boots and grease. This is a simple...


Product#: H16366

1966-74 Mopar B / E-Body Hotchkis Sport Suspension Steering Rods

Install these Hotchkis Sport Suspension Steering Rods and gain vastly increased handling and control. These rods are designed to be used in conjunction with Hotchkis Sport Suspension A-Arms to reduce bump steer to improve...


Product#: H14366

1966-74 Mopar B / E-Body Hotchkis Sport Suspension Adjustable Strut Rods

Install these Hotchkis Sport Suspension Adjustable Strut Rods and gain vastly increased handling and control. These 100% TIG welded, bolt-on adjustable strut arms positively locate the lower arm to improve caster,...


Product#: PM1516

1970-74 Dodge/Plymouth E-Body Front Torque Box Set, LH & RH

These torque boxes are designed to add strength to your Mopar unibody in several critical areas. The factory added OEM torque boxes on the high-HP, high torque cars and convertibles. Hemi cars, six-pak cars etc. had torque...


Product#: MM8109

1970-74 Mopar E-Body Rear Torque Box; LH

At the factory this was known as the "Hemi Box" or "Double Floor Plate". This component prevents torsional flex, and when combined with a subframe connector, it provides up to 20% more rigidity to the framework. Made in...


Product#: MM8110

1970-74 Mopar E-Body Rear Torque Box; RH

At the factory this was known as the "Hemi Box" or "Double Floor Plate". This component prevents torsional flex, and when combined with a subframe connector, it provides up to 20% more rigidity to the framework. Made in...


Product#: MM8113

1970-74 Mopar E-Body Front Torque Box; RH

At the factory this was known as the "Hemi Box" or "Double Floor Plate". This component prevents torsional flex, and when combined with a subframe connector, it provides up to 20% more rigidity to the framework. Made in...


Product#: MM8112

1970-74 Mopar E-Body Front Torque Box; LH

At the factory this was known as the "Hemi Box" or "Double Floor Plate". This component prevents torsional flex, and when combined with a subframe connector, it provides up to 20% more rigidity to the framework. Made in...


Product#: MM1944

1970-74 Mopar E-Body/1966 -70 B-Body; Shock Tower; RH

This replacement front shock tower is manufactured to factory specifications, features a black electrophoretically deposited coating (EDP, or E-coat) for superior long-term corrosion protection and is ready to be prepped,...


Product#: MM1943

1970-74 Mopar E-Body/1966 -70 B-Body; Shock Tower; LH

This replacement front shock tower is manufactured to factory specifications, features a black electrophoretically deposited coating (EDP, or E-coat) for superior long-term corrosion protection and is ready to be prepped,...


Product#: *MM8111

1970-74 Mopar E-Body Rear Torque Boxes

At the factory these where known as the "Hemi Boxes" or "Double Floor Plates". These components prevent torsional flex, and when combined with subframe connectors, it provides up to 20% more rigidity to the framework. Made...


Product#: *MM8115

1970-74 Mopar E-Body 4 Piece Torque Box Set

At the factory these where known as the "Hemi Boxes" or "Double Floor Plates". These components prevent torsional flex, and when combined with subframe connectors, it provides up to 20% more rigidity to the framework. Made...


Product#: *MM8114

1970-74 Mopar E-Body Front Torque Boxes

At the factory these where known as the "Hemi Boxes" or "Double Floor Plates". These components prevent torsional flex, and when combined with subframe connectors, it provides up to 20% more rigidity to the framework. Made...