1970-1976 Plymouth Duster Parts - Suspension

Install these Hotchkis Sport Suspension Steering Rods and gain vastly increased handling and control. These rods are designed to be used in conjunction with Hotchkis Sport Suspension A-Arms to reduce bump steer to improve...

Install these Hotchkis Sport Suspension Adjustable Strut Rods and gain vastly increased handling and control. These 100% TIG welded, bolt-on adjustable strut arms positively locate the lower arm to improve caster,...

The Hotchkis Sport Suspension Pivot Shaft set, replaces your worn out, sloppy handling lower control arm pivot shafts. Designed to be a direct fit for your stock originals, these shafts are a grease-able design. The grease...

Quality reproduction of the original rear suspension rubber bumper designed for use on various Dodge and Plymouth models. Each bumper is designed and manufactured to replace the old or worn out original bumper. Fits over the...

The Alterktion Street/Handling Front Suspension Package does more than save weight and add clearance. It uses precise geometry for optimum control on pothole-covered city streets, winding country roads, and even the road...

The Alterktion Street/Handling Front Suspension Package does more than save weight and add clearance. It uses precise geometry for optimum control on pothole-covered city streets, winding country roads, and even the road...

The Alterktion Street/Handling Front Suspension Package does more than save weight and add clearance. It uses precise geometry for optimum control on pothole-covered city streets, winding country roads, and even the road...

The Alterktion Street/Handling Front Suspension Package does more than save weight and add clearance. It uses precise geometry for optimum control on pothole-covered city streets, winding country roads, and even the road...

The Alterktion Street/Handling Front Suspension Package does more than save weight and add clearance. It uses precise geometry for optimum control on pothole-covered city streets, winding country roads, and even the road...

This replacement front leaf spring mount repair panel is manufactured in heavy gauge steel and will exceed factory specifications. Made in USA Note: Removal of the existing unit is required before this product can be...

Reproduction lower control arm bump stop spacers for all 1960-76 models. These spacer were used on models with 15" wheels, to prevent the front end from bottoming out.

Reproduction rear shackle hangers for 1964-76 A-Body models. These steel hangers provide a mounting point for the rear shackles. Powder coated black.

Reproduction hanger support plates for 1967-76 A-Body models. These inner hanger plates provide support to the front leaf spring hangers. Sold in pairs.

You bought a bushing set and now you need the sway bar link hardware. This set includes the bolts, nuts, washers, and spacers you need to complete the job. These are Stainless Steel Made in USA Applications: A-Body...

At the factory this was known as the "Hemi Box" or "Double Floor Plate". This component prevents torsional flex, and when combined with a subframe connector, it provides up to 20% more rigidity to the framework. Made in USA....

Connect the front and rear subframes together for added structural rigidity. The factory engineers requested them but the bean counters ruled them out. A popular addition to High-Performance cars and a must have on...

This Braided Stainless Power Steering Hosekit is designed for use on the Reilly AlterKation subframes for A/B/E body models. This kit has the hoses and fittings to connect the Saginaw pump to the power steering rack. Kit is...

Engineered to facilitate installing a Chrysler 518 Overdrive Automatic transmission into a 1967-1975 Dodge/Plymouth Mopar A-Body car when doing a Gen3 Hemi swap. Requires additional fabrication and welding. Made from...

Get rid of underperforming leaf springs with the Street-Lynx Triangulated 4-Bar System. This system drastically improves geometry, traction, and handling by separating the locating system from the spring, while lighter...

1967-75 Mopar A-body The US Car Tool radiator core support is made from 12ga steel (twice as thick as than the OEM sheet metal) and adds much needed stiffening to the front frame rails and inner fenders while maintaining that...

Reproduction of the original heavy duty rear leaf springs for use with 1973-74 Dart, Duster, and Swinger models with 340ci, and 360ci engines. Each leaf spring is manufactured to original factory specifications replicating...

You bought a bushing set and now you need the sway bar link hardware. This set includes the bolts, nuts, washers, and spacers you need to complete the job. These are Stainless Steel Made in USA Applications: A-Body...

If you are having difficulty maintaining proper front end alignment, be sure to check the mounting points for your suspension. This is a direct replacement for the control arm located in the "horseshoe". We have found that...

1967-75 Dodge/Plymouth A Body Torque Box Set. (Includes all 4 - two rear and two front) - Fits all A Bodies from 1967 through 1975, Dodge and Plymouth, Dart, Duster, Scamp, Valiant etc. These torque boxes are designed to add...

This rear spring mount for A-Body models is a replacement for a commonly rusted area. The rear wheel kicks up debris into this area where it is trapped and causes the mount to deteriorate, moving the leaf spring inside the...

Reproduction of the original standard style rear leaf springs for use with 1973-74 Dart, Duster, Swinger, Scamp, and Valiant models (without 340ci, 360ci engines). Each leaf spring is manufactured to original factory...

You bought a bushing set and now you need the sway bar link hardware. This set includes the bolts, nuts, washers, and spacers you need to complete the job. These are Stainless Steel Made in USA Applications: A-Body...

Dodge Plymouth A Body Mopar Hot Rod Torque Box Set. (Includes two rears) - Fits all A Bodies from 1967 through 1975, Dodge and Plymouth, Dart, Duster, Scamp, Valiant etc. These torque boxes are designed to add strength to...

Reproduction of the original rear leaf springs for use with 1970-72 Valiant, Dart, Duster, Swinger, and Demon models, with 340ci engines. Each leaf spring is manufactured to original factory specifiations replicating the...

Front Lower Core Support Brace installs between the front frame rails, under the factory radiator. Can replace the factory thin sheet metal support or can be installed on top of the factory core support. Adds rigidity to the...

At the factory this was known as the "Hemi Box" or "Double Floor Plate". This component prevents torsional flex, and when combined with a subframe connector, it provides up to 20% more rigidity to the framework. Made in USA....

Reproduction rear shock washers and nuts set for 1962-74 A-Body models. Every set includes 4 nuts, 4 outer washers, and 4 inner washers.

At the factory this was known as the "Hemi Box" or "Double Floor Plate". This component prevents torsional flex, and when combined with a subframe connector, it provides up to 20% more rigidity to the framework. Made in USA....

This replacement front leaf spring mount repair panel is manufactured in heavy gauge steel and will exceed factory specifications. Made in USA Note: Removal of the existing unit is required before this product can be...

Reproduction of the original rear leaf springs for use with 1970-72 Dart, Duster, Scamp, Swinger, and Valiant models without 340ci, 360ci engines. Each leaf spring is manufactured to original factory specifiations replicating...

Torsion bar crossmembers trap mud and dirt inside and it weakens the area, causing complete rusting from the inside out. Deterioration reaches the socket area making it so weak it can twist and rip apart. Now the torsion bar...

If you are having difficulty maintaining proper front end alignment, be sure to check the mounting points for your suspension. This is a direct replacement for the control arm located in the "horseshoe". We have found that...

Dodge/Plymouth A-Body 63-75 Front Spring Relocation BUCKETS ONLY Leaf Spring Relocation Kit provid up to 8" more room for rear tires. Anyone who has ever looked underneath the rear end of a Mopar notices the leaf springs are...

You bought a bushing set and now you need the sway bar link hardware. This set includes the bolts, nuts, washers, and spacers you need to complete the job. Made in USA Applications: A-Body 1960-62 Lancer 1960-76 Valiant...

1963-1975 Mopar A-Body Leaf Spring Relocation Kit REAR SHACKLE MOUNTS This is the two rear frame shackle mounts and bushing sleeves only. 1 left and 1 right. Designed to upgrade other kits that do not include the correct...

This rear spring mount for A-Body models is a replacement for a commonly rusted area. The rear wheel kicks up debris into this area where it is trapped and causes the mount to deteriorate, moving the leaf spring inside the...

Torsion bar crossmembers trap mud and dirt inside and it weakens the area, causing complete rusting from the inside out. Deterioration reaches the socket area making it so weak it can twist and rip apart. Now the torsion bar...

Reproduction hanger support plates for 1967-76 A-Body models. These outer hanger plates provide support to the front leaf spring hangers. Sold in pairs.

At the factory this was known as the "Hemi Box" or "Double Floor Plate". This component prevents torsional flex, and when combined with a subframe connector, it provides up to 20% more rigidity to the framework. Made in USA....

This is the two rear frame shackle mounts and bushing sleeves only. 1 left and 1 right. Designed to upgrade other kits that do not include the correct frame sleeve / shackle bushing or to replace damaged ones on your car. ...

This single adjustable QA1 Stocker Star aluminum shock allows you to simultaneously change the compression and rebound with one knob, giving 18 valving options. Sold individually. Made in USA Features: Easy, bolt-in...

If you might be looking for front end sturdiness or better performance; we offer polyurethane sway bar to frame bushings. These bushings replace those OEM soft rubber bushings and give your classic vehicle better handling and...

Polyurethane torsion bar dust boots. Sold as a pair. Made in USA Applications: A-Body 1962 Lancer 1962-76 Valiant 1963-76 Dart 1964-69 Barracuda 1970-76 Duster 1971-76 Scamp 1969-76 Swinger 1971-72 Demon 1973-76 Dart...

These reproduction rear leaf springs are designed for an exact, direct replacement of the originals. Includes front bushing already installed. Sold only as a pair. Note: Shipped double oversize . No further discounts...

Front sway bar bushings are the easiest way to increase the handling of your vehicle. By replacing your old rubber front sway bar bushings with these polyurethane bushings, you effectively increase the performance of your OE...

Front sway bar bushings are the easiest way to increase the handling of your vehicle. By replacing your old rubber front sway bar bushings with these polyurethane bushings, you effectively increase the performance of your OE...

If you might be looking for front end sturdiness or better performance; we offer polyurethane sway bar to frame bushings. These bushings replace those OEM soft rubber bushings and give your classic vehicle better handling and...

These control arm bushings provide a tight hold on your control arms making precise camber and caster possible. Soft OE rubber control arm bushings sag over time, resulting in alignment issues. Polyurethane bushings will...

This tubular upper control arm set is designed for installing mid-70's B and E-Body disc brakes on your A-Body Mopar. The arms are made from 1-1/4" .120" wall D.O.M. tubing and the pivot barrels are 1-1/2" .188" thick to...

If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...

This fixed, non-adjustable QA1 Stocker Star aluminum shock is designed for the budget-conscious owner in mind. Sold individually. Made in USA Features: Easy, bolt-in installation on most applications Non-coilover...

Replace those broken or missing control arm bumper stops with new polyurethane bumper stops. Sold as a pair. Made in USA Applications: A-Body 1 962 Lancer 1962-76 Valiant 1963-76 Dart 1964-69 Barracuda 1970-76 Duster...

There are significant forces that are aimed at the rear leaf spring-type suspension pivot points and shackles. These wear out the stock rubber bushings in a very short period of time. The best solution for keeping your...

Reproduction rear lower shock washers for 1962-74 A/B/E models. Washers have the correct concave shape and include the flat dimple around the edge. Sold as a set of 4.