1970 Chevrolet Impala Parts - Adhesives and Sealants

3M Plastic Emblem and Trim Adhesive is ideal for bonding and minor repairs on vinyl molding, interior trim, tail light lenses, plastic and metal emblems on interiors or exteriors. It dries quickly and is resistant to water,...

Rapid-curing one-component adhesive/sealant intended for all flush-mounted and bonded windshield, side glass, or back glass replacement. Comes in a 10 fl. oz. cartridge for use in a standard cartridge-style caulking gun....

Rapid-curing one-component adhesive/sealant intended for all flush-mounted and bonded windshield, side glass, or back glass replacement. Comes in a 20 fl. oz. flex-pack or sausage-pack for use in a professional pneumatic,...

Slow drying, non-hardening sealant designed for sealing cut gaskets and stamped parts. Allows for easy disassembly if required. Has a temperature range of -65°F to 400°F. Use where sealing is more important than...

This closed cell foam tape is coated on both sides with a pressure-sensitive adhesive. It is designed for attaching trim moldings, emblems and other articles where high internal strength is required.

This closed cell foam tape is coated on both sides with a pressure-sensitive adhesive. It is designed for attaching trim moldings, emblems and other articles where high internal strength is required.

Seals holes and leaks in mufflers, tailpipes and around joints. Makes new installation more secure. Resists temperatures up to 2000° F. Great for use on mufflers, tailpipes, joints and catalytic convertors.

Permanently repairs holes and leaks in exhaust systems. Seals out fumes at temperatures up to 2000° F. For use with mufflers, tailpipes and joints. Note: Safe for catalytic convertors.

This rapid curing adhesive/sealant is ideal for use with all types of gaskets and can also be used as a sealant between flanges, hose connectors, and similar close fitting parts.

This rapid curing adhesive/sealant is ideal for use with all types of gaskets and can also be used as a sealant between flanges, hose connectors, and similar close fitting parts.

Complete kit for repairing cracks and splits in mufflers, tail and exhaust pipes. Withstands temperatures over 1000° F. Includes ready-to-use foil packed bandage and support wire.

Epoxy impregnated 84 square inch fiberglass bandage chemically welds mufflers and tailpipes. Permanently repairs holes and leaks in exhaust systems saving costly part replacement and seals out poisonous fumes to temperatures...

Heavy-Duty Spray Adhesive is the answer when you need a quick-drying, long-lasting spray adhesive for a high-temperature application. Extra-strong contact-style adhesive sets quickly, and lasts even in high temperature...

3M General Trim Adhesive bonds automotive materials such as carpeting, vinyl, fabrics, and plastics to metal and other hard, impervious surfaces. Our high-strength adhesive offers good heat and water resistance. 3M General...

This rear view mirror adhesive is approved by General Motors, Ford, Chrysler and is designed to permanently remount mirrors to windshields. Achieves handling strength in seconds and mirror mounting strength in 15 minutes. ...

Quick drying instant gel adhesive is great for all minor automotive adhesions. This strong bonding gel is great for loose interior trim, emblems, chrome trim and other items requiring fast and safe bonding. 2 grams.

A high-tack, high-coverage, fast-drying, transparent adhesive for permanently attaching foils, carpeting, foam, paper, cardboard, felt, cloth, etc. to painted or unpainted metals, wood, hardboard and other base materials....

3M auto sealer is a black flowable product for installing weatherstrip that requires glue, or repairing leaks between glass and rubber or metal surfaces. Permanently seals windshields, back glass and other places where...

This yellow colored adhesive is used for bonding and sealing weatherstripping to trunk and doors. It is also an excellent general purpose adhesive which is: Fast drying Waterproof Flexible (rubbery) Resists oil, grease and...

Rapid-curing adhesive/sealant intended for all flush-mounted and bonded windshield or back glass replacements. 10 fl. oz. cartridge.

DEI Boom Mat Hi-Temp Spray Adhesive provides high strenght adhesion that bonds a wide variety of DEI Boom Mat Products. Ideal for the installation of DEI Heat Screen, D-Mat, Under Carpet, and UC Lite.

Black Wrinkle finish is a durable and long lasting finish, which has a unique, wrinkled texture. Its excellent finish for hiding imperfections like pitting, scratches or chips. Extremely durable formula resists oil, gas and...

Correct adhesive formula used to adhere the headliner to the roof panel. This is specially designed for use with early style headliners. Each can contains 4 fluid ounces and comes with a handy brush for easy application.

J-B Weld PlasticWeld will repair and rebuild any rigid or semi-flexible plastic including ABS, PVC and CPVC. Rebuild automotive trim, fiberglass parts and vinyl siding. Bonds instantly with superior strength and does not...

Boom Mat Spray-on thermal acoustic insulation reduces unwanted noise, vibration, and heat. It can be applied in multiples layers and dries in under 6 hours. Product Coverage: approximately 20 sq. ft. VOC Compliant in all 50...

For use with turbo-charged engines or high performance models. The most advanced, hi-temperature silicone gasket available. Sensor safe, low odor, non corrosive. Outstanding oil resistance and joint movement values. ...

Used when installing watershields in your door panel area. This is a firm setting product for sealing interior or exterior joints. It adheres well to clean, bare metal, primed metal and painted surfaces. It skins over...

Permatex Original Gasket Shellac Compound is an original quality formula, hard setting, economical sealant that seals all common gasketing materials in low temperature and low pressure applications. Note:Hose connections,...

The original blue formula replaces almost any cut or torn gasket. Makes reliable formed in place gaskets that resist cracking, shrinking and migrating. Coats pre-cut gaskets to increase reliability. Temperature range...

To finish off a clean and well-protected Exhaust Insulating Wrap application it is recommended to use the Hi-Heat Coating. The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders...

To finish off a clean and well-protected Exhaust Insulating Wrap application it is recommended to use the Hi-Heat Coating. The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders...

This seam sealer also known as strip caulk can be used to adhere a variety of parts; air ducts, body openings, door panels water shields, emblems, fenders, floor plugs, kick panels, fuel tank, filler neck, firewall openings,...

When it comes to making sure those small moldings, ornaments, emblems, knobs, etc. will stay where you want, the Quick Set Epoxy will do the trick! Fast curing, non shrinking, colorless epoxy in a convenient 2 part dispensing...

To finish off a clean and well-protected Exhaust Insulating Wrap application it is recommended to use the Hi-Heat Coating. The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders...

Makes reliable formed in place gaskets that resist cracking, shrinking and migrating. For Hi-temp applications or heavy duty use. Coats pre-cut gaskets to increase reliability. Temperature range -75°F to 650°F...