Product#: 14316

1964-72 GM; Rear End Cover Pipe Plug; 1""-14 Posi-Traction

Reproduction of the original positraction differential fill plug for vehicles equipped with either a 10 bolt or 12 bolt positraction differential. This plug will replaces the old or worn out original. 1" - 14.


Product#: UR8753090

Yukon Dura Grip Positraction 8.5" 30 Spline 3.08-3.90 Ratios

Yukon Dura Grip® Positraction unit is based on the race-proven four-spring clutch-style design that has been used by GM for years. Assembled with heavy-duty 4320 Chrome-Moly spider gears and composite clutches for...


Product#: UR822838

Yukon Dura Grip Positraction 8.2" 28 Spline 3.08 And Up Ratios

Yukon Dura Grip® Positraction unit is based on the race-proven four-spring clutch-style design that has been used by GM for years. Assembled with heavy-duty 4320 Chrome-Moly spider gears and composite clutches for...


Product#: LS231230

Powertrax; GRIP LS; GM 12 Bolt Limited Slip Differential; 8.875" Ring Gear; 30 Spline Axle; For Carriers With 3.90 Gear & Down

The Powertrax Grip LS, is a clutch type differential in a forged steel case. This differential uses a set of carbon clutch discs to provide traction as needed, is rebuild-able and serviceable, and aimed squarely at the street...


Product#: *GM10273MKT

GM 10 Bolt 8.5" 2.73 Ring & Pinion Master Set W/Timken Bearings (1.626" Pinion Diameter, 30 Spline)

Replace your worn out or broken ring and pinion gears with new components from Motive Gear. Includes matched ring and pinion gears, pinion bearings, seal, crush sleeve and nut, carrier bearings, shim kit, ring gear bolts,gear...


Product#: 5420104

Auburn Gear 8-7/8" 12-Bolt, 4.10/Up, 30 Spline, C-Clip Axle, 4 Series HP Limited-Slip Differential

Auburn Gear's High Performance Series limited-slip differentials outperform standard OEM differentials hands down. They deliver more traction and faster engagement for controlled power transfer and lightning fast reaction to...


Product#: *G888342MK

GM 12 Bolt 8.875" 3.42 Ring&Pinion Master Set

Replace your worn out or broken ring and pinion gears with new components from Motive Gear«. Master sets includes: Ring and Pinion gears Pinion Bearings Seal, Crush Sleeve and Nut Carrier Bearings Shim Kit Ring Gar...


Product#: *G888373MK

GM 12 Bolt 8.875" 3.73 Ring & Pinion Master Set (1.625" Pinion Diameter, 30 Spline)

Replace your worn out or broken ring and pinion gears with new components from Motive Gear«. Master sets includes: Ring and Pinion gears Pinion Bearings Seal, Crush Sleeve and Nut Carrier Bearings Shim Kit Ring Gear...


Product#: RP8888373

1965-72 GM 12 Bolt 8-7/8" 3.73 Ratio Ring and Pinion

Includes 12 bolt, 8 7/8" ring gear and pinion includes ring and pinion only (not a kit). For a complete assembly also purchase 12 bolt ring and pinion shim kit, 12 bolt bearing kit and 12 bolt installation kit. ...


Product#: M12150

1966-70 Impala / Full Size Moser 30 Spline, 31-5/16" Long C-Clip Axles For 12 Bolt Rear Ends

These Moser forged steel street axles for 12 bolt Chevrolet rear end are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE application. Made in the USA Note: Special order, must be...


Product#: M12149

1966-70 Full Size Moser C-Clip Axles 10 Bolt 31-5/16" Long 28 Spline

Moser offers forged steel street axles for 10 and 12 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Note: No further discount s apply.


Product#: UR657030

1965-70 Impala / Full Size LH/RH 12 Bolt 31-3/8" Long, 5 Lug, 30 Spline Rear Axle

This rear axle is built to stand up to the demands of high-performance applications. Made from 1541H steel, this axle contains significantly more manganese than 1040 or 1050 steel versions. This greatly increases strength...


Product#: UR657228

1965-72 Impala / Full Size LH/RH 10 Bolt 31-3/8" Long 28 Spline Rear Axle

This rear axle is built to stand up to the demands of high-performance applications. Made from 1541H steel, this axle contains significantly more manganese than 1040 or 1050 steel versions. This greatly increases strength...


Product#: UR12882

1964-72 12 Bolt 8.875" Differential Master Bearing Set With Timken Bearings

This set is designed to replace the differential bearings on 1967-72 Camaro models. Master bearing set includes bearings and races, gasket (or RTV silicone), washers, nuts and ring gear bolts for a complete replacement.


Product#: UR10821

1964-72 10 Bolt 8.2" Differential Basic Bearing Set With Timkin Bearings

This set is designed to replace the differential bearings on 1967-70 Camaro models. Basic bearing set includes bearings and races, gasket (or RTV silicone), washers, and nuts for a complete replacement.


Product#: UR12881

1964-72 12 Bolt 8.875" Differential Basic Bearing Set With Timkin Bearings

This set is designed to replace the differential bearings on 1967-72 Camaro models. Basic bearing set includes bearings and races, gasket (or RTV silicone), washers, and nuts for a complete replacement.


Product#: M12144

Moser Performance; Ring Gear Performance Differential Cover; 10 Bolt Chevrolet with 8.2" or 8.5"

Strengthen your rear end with a Moser Performance Cover. This cover is made of 356-T6 aluminum and designed to improve ring and pinion gear life, as well as improve the appearance of your vehicle. It will greatly reduce the...


Product#: 141697-BCHW

Chevy Bowtie Emblem Rear End Cover, Gm, 12 Bolt, Passenger Car

Reinforced lightweight aluminum rear end cover designed to strengthen the rear housing case in heavy torque situations. The familiar Bowtie Emblem is raised and precision milled on a black crinkle coated surface. Each cover...


Product#: 141696-BCHW

GM 8.2, 8.5 10 Bolt; Rear End Cover, Chevy Bowtie Emblem

Reinforced lightweight aluminum rear end cover designed to strengthen the rear housing case in heavy torque situations. The familiar Bowtie Emblem is raised and precision milled on a black crinkle coated surface. Each cover...