1970 Plymouth Belvedere Parts - Fuel System

Max-Clean’s proprietary technology targets both the intake system and combustion chamber and is effective on the entire spectrum of engines on the road, whether they are new or old, gasoline or diesel, naturally aspirated,...

Replace your original broken or missing gas cap with this service replacement fuel cap. This cap is manufactured to correct specifications for use on vehicles without emissions control. Considered a shallow cam style cap. ...

Max-Clean’s proprietary technology targets both the intake system and combustion chamber and is effective on the entire spectrum of engines on the road, whether they are new or old, gasoline or diesel, naturally aspirated,...

This kit features a 255 L/PH inline high pressure, high volume EFI pump that will provide enough fuel delivery for up to 600 HP. Included are the fuel lines, fittings, two billet fuel filters and enough premium quality hose...

Fuel pump mounting bolts for all Mopar models equipped with a mechanical fuel pump. Made from steel and coated in black phosphate.

This mechanical fuel pump is cast from a durable zinc based material and chrome plated for years of trouble free performance; provides 80 GPH free flow, and has a 360 degree rotating lower housing for adjusting alignment....

This mechanical fuel pump is cast from a durable zinc based material and chrome plated for years of trouble free performance; provides 80 GPH free flow, and has a 360 degree rotating lower housing for adjusting alignment....

This fuel pump is specifically designed for each year and engine size listed. These parts may differ slightly in appearance from the original, but will fit and function correctly, offering many years of satisfactory service. Fuel pump specs: inlet 5 /16" outlet 1/2" Fits: 1960-69 Mopar A, B & E-Body Vehicles with 170 CID engines 1960-70 Mopar A, B & E-Body Vehicles with 225 CID engines 1970 Mopar A, B & E-Body Vehicles with 198 CID engines 1972-74 Mopar A, B & E-Body Vehicle s with 198 CID engines 1972-74 Mopar A, B & E-Body Vehicles with 225 CID engines

Reproduction of the original fuel sending unit designed for use with 1968-1970 Dodge and Plymouth B-Body models. After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can...

Replacement style gas cap designed to replace the original gas cap for the listings below. Each gas cap is manufactured to fit the fuel neck properly. This service replacement fuel cap may differ slightly from the original...

Disposable in-line filter with chrome housing and paper element. Dress your engine compartment and protect it from harmful contaminates. {specs} {fitment}

Disposable in-line filter with chrome housing and paper element. Dress your engine compartment and protect it from harmful contaminates. {specs} {fitment}

The Go EFI 4 Self Tuning Fuel Injection is rated at up to 600 HP and is suitable for engines from 250 HP thru 600 HP. It fits any 4-bbl intake manifold and is the most self-contained and full-featured unit of this type. It...

Replace your original broken or missing gas cap with this service replacement fuel cap from Motorad. This cap is manufactured to correct specifications for use on vehicles without emissions control. May differ from the...

Fuel caps have three important functions; safety of the vehicle’s occupants, fuel economy and reducing emissions. Replace that old, damaged or missing fuel cap or protect your vehicle from vandalism and theft with this new...

This fuel pump is specifically designed for each year and engine size listed. These parts may differ slightly in appearance from the original, but will fit and function correctly, offering many years of satisfactory service....

Depending on fuel system or fuel tank type when installing a Ridetech billet aluminum fuell filler assembly, a venting system may be required. This venting kit is designed just for that and contains vent tubing and fittings.

This fuel pump is specifically designed for each year and engine size listed. These parts may differ slightly in appearance from the original, but will fit and function correctly, offering many years of satisfactory service....

Each fuel line is manufactured using an exact process that reproduces the correct bends to match the factory original equipment. Precise manufacturing techniques with choice material selection and you can be ensured that you...

Each fuel line set is manufactured using an exact process that reproduces the correct bends to match the factory original equipment. Precise manufacturing techniques with choice material selection and you can be ensured that...

The Go EFI 4 Self Tuning Fuel Injection is rated at up to 600 HP and is suitable for engines from 250 HP thru 600 HP. It fits any 4-bbl intake manifold and is the most self-contained and full-featured unit of this type. It...

Reproduction ofg the original style fuel tank to filler neck rubber grommet designed to replace the old or worn out original. Replace brittle or deteriorated fuel tank filler neck grommets with this quality reproduction...

Fuel caps have three important functions; safety of the vehicle’s occupants, fuel economy and reducing emissions. Replace your old, damaged or missing fuel cap with this quality replacement. Includes fuel cap and 2 keys....

The fuel tank insulator pad is made of die-cut rubber and fits on top of the tank, between the fuel tank and the body to guard against vibration of the tank against the body. For 1968-70 B-Body models.

Correct replacement fuel tank vent tubes which extend from the fuel tank across the trunk. These lines are produced in the original material for a correct look. Each line is designed to OE specifications and is guaranteed to...

Fuel caps have three important functions; safety of the vehicle’s occupants, fuel economy and reducing emissions. Replace that old, damaged or missing fuel cap or protect your vehicle from vandalism and theft with this...

Replace your original broken or missing gas cap with this service replacement fuel cap from Stant. This cap is manufactured to correct specifications. May differ from the original in appearance, but will fit and function...

Reproduction of the original fuel filler neck grommet designed for use with various 1964-74 Dodge and Plymouth models. Eliminate vapor or fuel leaks by replacing the fuel filler neck grommet. Manufactured from OE materials...

When authenticity is a top priority, you’ll want to be sure to install correctly marked fuel hose and clamps on your A-body, B-body or E-body vehicle. These concours quality fuel hose kits contain "KV" and/or "KV dash" marked...

Replaced your cracked, broken or faded hoses. Original black fuel and vapor hose. Sold by the foot.

Reproduction fuel tank mounting lock nuts for various 1960-76 Mopar models. Sold in pairs. Zinc plated, 3/8" - 16, 9/16" outer. Fuel tank mounting studs (J bolts) sold separately. Use part# MM8271 fuel tank mounting studs. ...

Replaced your cracked, broken or faded hoses. Original black fuel and vapor hose. Sold by the foot.

Replaced your cracked, broken or faded hoses. Original black fuel and vapor hose. Sold by the foot.

When authenticity is a top priority, you’ll want to be sure to install correctly marked fuel hose on your A-body, B-body or E-body vehicle. This concourse quality 5/16" fuel hose “KV” marked hose in 3-foot lengths.

When authenticity is a top priority, you’ll want to be sure to install correctly marked fuel hose and clamps on your A-body, B-body or E-body vehicle. These concours quality fuel hose kits contain "KV" and/or "KV dash" marked...

When authenticity is a top priority, you’ll want to be sure to install correctly marked fuel hose on your A-body, B-body or E-body vehicle. This concourse quality 3/8" fuel hose “KV” marked hose in 3-foot lengths.

Each line is manufactured using an exacting process that reproduces the correct bends to match the factory original equipment. Couple precise manufacturing techniques with choice material selection and you can be ensured that you are installing the be st reproduction lines available on the market. These lines, produced in original steel material will fit your B-body application without the hassle of bending up your own lines. Note: Shipped oversized. For 1970 Dodge Charger, Cornet, Super Bee;1 970 Plymouth Belvedere, GTX, Road Runner and Satellite; 1/4" return line.

When authenticity is a top priority, you’ll want to be sure to install correctly marked fuel hose and clamps on your A-body, B-body or E-body vehicle. These concourse quality fuel hose kits contain "KV" and/or "KV dash"...

Correct replacement fuel tank vent tubes which extend from the fuel tank across the trunk. These lines are produced in the stainless steel material for a correct look. Each line is designed to OE specifications and is...

When authenticity is a top priority, you’ll want to be sure to install correctly marked fuel hose and clamps on your A-body, B-body or E-body vehicle. These concourse quality fuel hose kits contain "KV" and/or "KV dash"...

When authenticity is a top priority, you’ll want to be sure to install correctly marked fuel hose on your A-body, B-body or E-body vehicle. This concourse quality 3/8" fuel hose “KV dash” marked hose in 3-foot lengths.

Visually inspect the condition of the element. Includes high polished chrome plating for a custom appearance. {specs} {fitment}

Install the sending unit on your vehicle with a heavy duty stainless steel lock ring for superior corrosion resistance. Lock ring is manufactured from stainless steel for a longer lasting part that fits exceptionally well and...

Visually inspect the condition of the element. Includes high polished chrome plating for a custom appearance. {specs} {fitment}

This anodized aluminum EFI fuel pump offers maximum performance in a compact package. Its rugged housing and high quality internals make it both strong and durable. The in-line design keeps the pump motor and components cool...

These concourse quality 5/16" fuel filters are printed with the correct shade of blue and feature manufacture code, day of year and year codes just like the originals. This is a “Factory Original” filter which is what would...

These concourse quality 5/16" fuel filters are printed with the correct shade of blue and feature manufacture code, day of year and year codes just like the originals. This is a “Mopar Replacement” which is what would have been sold over the parts cou nter at the time. Officially licensed by Chrysler as a Mopar Authentic Restoration Product and identical to the originals in every detail. Each filter kit comes with 5/16" date coded steel filter, two 2" pieces of “KV” hose and four period correct clamps. Date coded June 1970.

These concourse quality 5/16" fuel filters are printed with the correct shade of blue and feature manufacture code, day of year and year codes just like the originals. This is a “Factory Original” filter which is what would...

These concourse quality 5/16" fuel filters are printed with the correct shade of blue and feature manufacture code, day of year and year codes just like the originals. This is a “Mopar Replacement” which is what would have...

These concourse quality 5/16" fuel filters are printed with the correct shade of blue and feature manufacture code, day of year and year codes just like the originals. This is a “Mopar Replacement” which is what would have...

These concourse quality 5/16" fuel filters are printed with the correct shade of blue and feature manufacture code, day of year and year codes just like the originals. This is a “Factory Original” filter which is what would have been installed on your car at the factory. Officially licensed by Chrysler as a Mopar Authentic Restoration Product and identical to the originals in every detail. Each filter kit comes with 5/16" date coded steel filter, two 2" pieces of “KV” hose and four period correct clam ps. Date coded April 1970.

These concourse quality 5/16" fuel filters are printed with the correct shade of blue and feature manufacture code, day of year and year codes just like the originals. This is a “Mopar Replacement” which is what would have been sold over the parts cou nter at the time. Officially licensed by Chrysler as a Mopar Authentic Restoration Product and identical to the originals in every detail. Each filter kit comes with 5/16" date coded steel filter, two 2" pieces of “KV” hose and four period correct clamps. Date coded April 1970.

Each line is manufactured using an exact process that reproduces the correct bends to match the factory original equipment. Precise manufacturing techniques with choice material selection and you can be ensured that you are...

Reproduction of the original fuel tank filler neck designed for use with 1968-70 Dodge Coronet, Super Bee, 440, 500, R/T, and Plymouth Belvedere, GTX, Road Runner, Satellite, and Superbird models. Each filler neck is...

Replacement fuel line clip sets. Used to attach fuel lines to the frame. Made from stamped steel like originals. [fitment}

Replacement fuel line clip sets. Used to attach fuel lines to the frame. Made from stamped steel like originals. {fitment}