Product#: 3415

Bumper Bolt with Conical Keps Hex Nut; Polished Stainless Steel Capped Head; 3/4" Diameter; 3/8-16" x 1"; Zinc Plated

Reproduction GM bumper bolt for a variety of General Motors and Chrysler applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long...


Product#: 2710

Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head

Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...


Product#: 8610

Flat Washer; 1/2" USS; Zinc Plated

1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...


Product#: 13757

1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon

Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...


Product#: DB4052C

1968-70 Dodge/Plymouth B-Body (Except Charger); Back Window Glass; Clear

This OER™ rear window glass is made of tempered safety glass and is produced without date coding or original style markings. Note: Pictured for illustration purposes only. Actual shape may differ from picture. All...


Product#: MD2207

1966-74 Dodge/Plymouth A & B-Body; Exterior Door Mirror; Round Head; With Remote; LH Driver Side

Freshen the look of your Dodge or Plymouth by replacing your pitted, damaged or missing mirror with this brand new replacement remote outer door mirror for 1966-74 A-body models with a vent window or 1966-70 B-body models...


Product#: DW715T

1968-70 Dodge/Plymouth B-Body; 2 Door Hardtop/Sedan; Windshield; Tinted With Shade

OER reproduction glass for a variety of 1968-70 Mopar B-Body models. Features light green tinted laminated glass with blue/green shade at the top, and no date coding or Pentastar or other OE style markings. Each windshield is...


Product#: DW715C

1968-70 Dodge/Plymouth B-Body; 2 Door Hardtop/Sedan; Windshield Glass; Clear

OER reproduction glass for a variety of 1968-70 Mopar B-Body models. Features clear laminated glass, no date coding. Each windshield is professionally packed with extra care to prevent damage during shipping. Note: Shipped...


Product#: MD2198

1966-70 Chrysler, Plymouth, Dodge A, B, C-Body; Convertible Top Hydraulic Cylinder; Each

Reproduction of the original convertible top cylinder designed for use with 1966-70 Chrysler, Dodge and Plymouth A, B, and C Body convertible models as listed. All convertible top cylinders are not the same. This convertible...


Product#: 10362

Bolt, 5/16-18 x 13/16" Pointed Tip With Hex Washer Head, Black Phosphate

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10...


Product#: 2802710

1967-74 Dodge, Plymouth; A, B-Body; Outer Door Mirror; Single Post; with Hardware; RH or LH; Each

Reproduction of the original outer single post door mirror for 1967-74 Dodge and Plymouth A-Body or 1968-70 Dodge and Plymouth B-Body models. Each outer door mirror is manufactured in die-cast zinc featuring a bright chrome...


Product#: DD4258T

1968-70 Dodge, Plymouth B-Body; Door Glass; 2 door Hardtop; Tinted; Passenger Side

Reproduction door glass for 1968-70 Dodge and Plymouth B-Body models. Each door glass is manufactured in tempered safety glass and is produced without date coding or original style markings. 4 hole design. Note: Pictured...


Product#: DD4259C

1969-70 Dodge, Plymouth B-Body; Door Glass; 2 Door Hardtop ; Clear; Drivers Side

This OER™ door glass designed for use with 1969-70 Dodge and Plymouth B-Body 2 door hardtop models as listed below. Each door glass is manufactured in tempered safety glass and is produced without date coding or...


Product#: 3899508

1959-80 Trico Windshield Wiper Blade; 15" Length; Various Models; Each

Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...


Product#: MB2262

1967-70 Dodge, Plymouth A & B Body; Front Outer Door Handle Set; with Chrome Buttons

Reproduction of the original outer door handles designed for use with various 1967-70 Dodge and Plymouth models as listed below. Each door handle is manufactured in quality die-cast zinc featuring a polished chrome finish...


Product#: K51020

1962-76 GM, Dodge, Plymouth; Various Models; Convertible Top Boot Storage Bag

Why leave your top boot in the trunk exposed when you can keep it safe and clean by safely storing it in this special top boot storage bag. The storage bag will help protect your vehicles top boot while being stored in the...


Product#: DQ4049T

1968-70 Mopar B-Body 2 Door Hardtop Reproduction Quarter Glass; Tinted RH

This quarter glass is made of tempered safety glass and is produced without date coding or original style markings. Note: Pictured for illustration purposes only. Actual shape may differ from picture. All glass is...


Product#: DQ4050C

1968-70 Mopar B-Body 2 Door Hardtop Reproduction Quarter Glass; Clear LH

This quarter glass is made of tempered safety glass and is produced without date coding or original style markings. Note: Pictured for illustration purposes only. Actual shape may differ from picture. All glass is...


Product#: DQ4049C

1968-70 Mopar B-Body; 2-Door Hardtop; Quarter Glass; Clear; RH

This quarter glass is made of tempered safety glass and is produced without date coding or original style markings. Note: Pictured for illustration purposes only. Actual shape may differ from picture. All glass is...


Product#: MM2105

1966-74 Dodge, Plymouth; Lower Front Door Hinge; LH; Drivers Side; Various Models

Reproduction of the original door hinge designed for use on various Dodge and Plymouth A and B-Body models. The front doors on 1966-74 Mopar A and B-Body models were extremely heavy and hard on the original door hinges. Each...