Product#: T70781

Delco Energizer R59 Battery Topper Top Post

Now you can turn any modern style battery into a vintage looking one by adding this battery topper featuring the correct special grain just as original. Battery toppers are designed to be used with any maintenance free flat...

Product#: X600750

BOLT, 5/16-18 X 1-1/4" Pointed Tip With Hex Washer Head, Black Phosphate

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...

Product#: MD2094

1970-76 Dodge, Plymouth A, B, C, E / 1973-85 Dodge, Plymouth Truck; Turn Signal Switch; 8 Wire Style; w/o Cornering Lamps

Reproduction Chrysler, Dodge, and Plymouth turn signal switch assembly to replace the worn out or non-functioning original Mopar unit. Manufactured to exact specifications, each switch features a correctly constructed...

Product#: MH109

1967-71 Mopar B-Body, 1970-71 E-Body Sparton Style Horn Assemblies - Pair High and Low Horn

Correct OER® reproduction of the Sparton horns designed for various 1967-71 Mopar models. Each horn is designed with the Dodge and Plymouth "folded horn" design for proper sound and correct pitch. Manufactured to factory...

Product#: 2444442

1966-74 Chrysler, Dodge, Plymouth; Starter Relay

Quality replacement starter relay designed for use on all 1966-74 Chrysler, Dodge and Plymouth models. This starter relay mounts on the inner fenderwell near the battery. Will fit and install on all 1966-74 Chrysler, Dodge,...

Product#: MB2534

1969-70 Dodge, Plymouth B-Body; Positive Battery Cable - Big Block; with 1-Piece Molded Starter Lug

Reproduction battery cables for 1969-70 Dodge and Plymouth big block models with 1-piece molded starter lug. Cables feature correct lead length and markings. The positive cable assemblies are manufactured like the original...

Product#: MD2570

1970-74 Dodge, Plymouth; Positive Battery Cable; A/B/E-Body Models; 43-1/2" overall length

Reproduction of the original positive battery cable for use with 1970-74 Dodge and Plymouth models. Each cable is designed and manufactured to replicate the original in appearance and lead length. The positive cable assembly...

Product#: MD2085

1970-82 Chrysler, Dodge, ,Plymouth,; Turn Signal Switch; 11 Wire Style; Car & Truck; with Cornering Lamps

Reproduction Chrysler, Dodge & Plymouth turn signal switch assembly to replace the worn out or non functional original. Manufactured to exact specifications, each switch features injection molded construction with correctly...

Product#: T70782

Delco Energizer R89 Side Post Battery Topper

Now you can turn any modern style battery into a vintage looking one by adding this battery topper featuring correct special grain just as original. Battery toppers are designed to be used with any maintenance free flat top...

Product#: MD2450A

1970-74 Dodge, Plymouth B / E Body; Battery Tray

Reproduction of the original battery tray designed for use on various 1970-72 Dodge and Plymouth B-Body and 1970-74 E Body models. Manufactured in quality stamped steel to Mopar specifications. Features correct mounting...

Product#: MD9341

1962-81 AMC, Chrysler, Dodge, Plymouth; Headlamp Switch; 7 Terminals Plus Ground; with 1-5/8" Rheostat

Reproduction headlamp switch for various 1962-74 Mopar A and B-Body models and other vehicle models as listed. This switch features 7 terminals, plus 1 ground terminal on the bottom rear portion of the switch that can be used...

Product#: CA4857

Cloth Wiring Harness Tape; 1" x 100 foot

If you want an OEM quality and appearance for your original or reproduction wiring, this specially manufactured black! This adhesive back tape will allow you to re-wrap your existing harness or replace tape which may have...

Product#: 21025

OER Smart Charger 1250; Smart Battery Charger And Maintainer; 6V/12V; 1.25 Amp

The OER Smart Charger 1250 battery charger and maintainer for classic cars and trucks provides high frequency automatic intelligent charging for 6V or 12V lead-acid, flooded, or sealed maintenance-free (AGM and Gell Cell)...

Product#: 10626

Top Post Battery Cable Terminal

Due to the corrosive nature of battery electrolyte, the original lead cast positive and negative terminal ends usually require replacement every few years. We offer these replacement OEM type terminals for use on top post...

Product#: MD6417

1968-74 Chrysler, Dodge, Plymouth B Body; Neutral Safety Switch Pig Tail; Repair Harness; 3 Prong Connector

Reproduction neutral safety switch harness and socket used to replace the old or damaged harness and connector on various 1968-2002 AMC, Chrysler, Dodge, and Plymouth models. This replacement wiring includes the socket and...

Product#: MD9340

1962-81 AMC, Chrysler, Dodge, Plymouth; Headlamp Switch; 7-Terminal; with 1-5/8" Rheostat

Reproduction headlamp switch for various 1962-76 Mopar A and B-Body models. This 7 terminal switch does not have a ground terminal on the bottom of the backside or rear of switch. This switch features a 1-5/8" ceramic...

Product#: 2534814

Dodge, Plymouth A, B, E Body; Battery Hold Down J-Bolt; 7"

Reproduction battery hold down J bolt for various Dodge and Plymouth models. Each bolt is a reproduction of the original style battery hold down bolt. This is a 7" bolt. Refer to part number # 2074089 for 8.5" bolt. {fitment}

Product#: A17690

1956-96 AMC, Chrysler, GM, Ford; Wiring Connector; 2-Terminal; Female; Various Applications

Reproduction 2-terminal wiring connector with pigtail to fit a wide variety of AMC and GM applications. This connector is used on relays, AC clutch cycle switches, AC compressor, back-up lamp switches, HVAC components,...

Product#: 14097278

Starter Bolt 3/8"-16 X 4-11/16"

Replacement starter bolt for models that require a 3/8"-16 x 4-11/16" bolt.

Product#: 2074089

1967-74 Dodge, Plymouth A, B, E; Battery Hold Down J-Bolt; 8.5"

Exact reproduction of the original battery hold down J bolt designed for use with 1967-74 Dodge and Plymouth A, B, and E body models as listed. Measures 8.5". Refer to part number # 2534814 for 7" bolt. {fitment}