Product#: K4122

Windshield/Back Glass; Butyl Rubber Sealant Tape; 3/8" Diameter Round Ribbon; 15-Foot Roll

OER butyl rubber sealant for installing front windshield or back glass installation. Can be used on virtually all models of Chrysler, GM, and Ford that did not use a contoured molded style weatherstrip for installation of the...

Product#: MD2077

1962-78 Dodge/Plymouth A, B & E-Body; Hood Adjust Bumper

Factory style replacement hood adjust bumper for 1962-78 A, B and E-Body models. Designed to factory specifications and manufactured in rubber to correctly replace the hood adjust bumper. This bumper features a 1-1/4" outer...

Product#: MB1280

1968-70 Plymouth B-Body; Rubber Bumper Set

Factory-style reproduction of the original rubber bumper and stopper set designed for use with 1968-70 Plymouth B Body models. Each bumper is manufactured to the correct configuration with quality EPDM rubber. Rubber...

Product#: MB1978

1970 Dodge/Plymouth B-Body; Trunk Weatherstrip Seal

Reproduction of the original trunk weatherstripping designed to fit a variety of 1970 Dodge and Plymouth B-Body models. Manufactured in durable rubber material, each weatherstrip features a proper fit to seal the elements...

Product#: MP41261

1966-70 Mopar Door Jamb Seal Screw Set ; 14 Piece Set ; B-Body

Reproduction of the original door jamb and door end seal screws for 1966-70 Mopar B-Body vehicles. These phillips head screws are black-oxide coated and designed to accurately replace the screws in the door jamb seals and...

Product#: TF300249

1955-59 Truck, 1955 Car 4-Hole Wire Harness Grommet (Large)

Reproduction of the large 4-hole firewall wire harness grommet for all 1955 Chevrolet cars and 1955-59 Chevrolet and GMC trucks. Can also be used for custom or as a universal fit grommet for other applications. Measures 1...

Product#: MN3104

1967-74 Chrysler, Dodge, Plymouth; A, B-Body; Front Door Glass Channel Seals; with Clips; Pair

Reproduction front door glass channels for 1967-74 Dodge and Plymouth A-Body, and 1966-70 B-Body models as listed. These front door glass seals attach to the front of each door window in order to allow the glass to slide up...

Product#: MD2067

1962-70 Dodge/Plymouth A,B,E Body; Door Rubber Bumper; Each

Factory-style reproduction of the rubber door bumper that mounts to the door on 1962-70 Mopar A, B and E-Body vehicles. This rubber bumper is manufactured as original offering an authentic appearance and fit. Designed as an...

Product#: A1031

Nylon Fastener; 13/64" Dia. Stem; 13/32" Stem Length; For Door/Header Weatherstrip; Natural

This reproduction door weatherstrip clip is used on most GM vehicles which require plastic push in clips. These hook into holes in the door rubber weatherstripping and hold the weatherstrip to the door. Also used on Most GM...

Product#: MB1285

1968-71 Mopar B-Body Hood Side Stop Rubber Bumper

Factory-style replacement hood side stop bumper for various 1968-71 Mopar B-Body models including Charger, Coronet, Belvedere, Road Runner, Satellite and Superbird models. Designed to factory specifications to correctly...

Product#: MD2075

1968-74 Dodge/Plymouth A, B & E-Body; Hood Side/Trunk Rubber Bumper; 7/8" X 7/8"

Factory-style replacement hood side stop and trunk bumper for various 1968-74 Mopar A, B and E-Body models. Designed to factory specifications to correctly replace the hood side stop or trunk bumper. Sold individually.

Product#: MD2074

1962-74 Dodge/Plymouth B/E-Body; Hood Side/Trunk Rubber Bumper

Factory-style replacement hood side stop and trunk bumper for various 1962-65 Mopar B-Body models and 1968-74 B and E-Body models. Designed to factory specifications to correctly replace the hood side stop or trunk bumper....

Product#: A9711B

NotcHead Firewall Ring Kit Machine Finish

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4?, Two 5/8? and one 1/2?...

Product#: MB1969

1968-70 Mopar B-Body; Restoration Gasket Set; With 8-3/4" Rear Axle

Reproduction restoration gasket kit for various 1968-70 Mopar B-Body models. These gaskets are manufactured to original specifications for proper fit and appearance. Set Contains These Gaskets: Steering Column ...

Product#: MB1947

1962-74 Dodge, Plymouth B Body, 1963-76 A Body; Lower Inner Front Fender Splash Seals; Pair

Reproduction of the original lower inner front fender splash seals designed for use with 1962-74 Dodge, Plymouth B-Body, and 1963-74 A Body models as listed. These are the gaskets that feature a T-shaped clip. Each shield is...

Product#: MD2078

1964-74 Dodge/Plymouth A/B/E-Body; Hood Adjustment Bumper; Rubber; Each

Reproduction of the original trink and hood rubber stopper designed for use on 1964-74 A/B and E body hoods. Manufactured to OE specs in the correct configuration. Measures 1-1/4" O.D., 3/4" large hole, 7/16" small hole, 1/2"...

Product#: MB281028

1962-74 Chrysler, Dodge, Plymouth; Splash Shield Clip Set; 25 Piece Set

Reproduction of the original style splash shield clips designed for use with all 1962-1974 Dodge and Plymouth models. These clips were used on various headlamp splash shields, inner fender splash shields and other splash...

Product#: A9712B

NotcHead Firewall Ring for 1/2" Heater Hose or AC #6 - Black Anodized Finish

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

Product#: A9758P

NotcHead Firewall Ring for 5/8" Heater Hose or AC #8 - Polished Finish

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

Product#: MB184606

1968-1970 Dodge, Plymouth B-Body; Wiper Pivot Gasket Set

Reproduction of the original wiper pivot gaskets designed for use with all 1968-1970 Dodge and Plymouth B-Body models. These gaskets are manufactured to the correct original shape to keep water from leaking into the vehicle....