Product#: X600750

BOLT, 5/16-18 X 1-1/4" Pointed Tip With Hex Washer Head, Black Phosphate

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10...

Product#: MD2094

1970-76 Dodge, Plymouth A, B, C, E / 1973-85 Dodge, Plymputh Truck; Turn Signal Switch; 8 Wire Style

Reproduction Chrysler, Dodge, and Plymouth turn signal switch assembly to replace the worn out or non-functioning original Mopar unit. Manufactured to exact specifications, each switch features a correctly constructed...

Product#: MB2000B

1965-74 AMC, Dodge, Plymouth; Gauge Cluster Voltage Limiter; Various Applications

This replacement voltage limiter is designed to provide a 5-volt supply and circuit protection up to 18-volts. This limiter will work with reproduction gauges, as well as factory gauges, and it?s required when using...

Product#: MD2085

1970-82 Chrysler,Plymouth,Dodge; Turn Signal Switch; 11 Wire Style

Reproduction Chrysler, Dodge & Plymouth turn signal switch assembly to replace the worn out or non functional original. Manufactured to exact specifications, each switch features injection molded construction with correctly...

Product#: 21025

OER Smart Charger 1250; Smart Battery Charger And Maintainer; 6V/12V; 1.25 Amp

The OER Smart Charger 1250 battery charger and maintainer for classic cars and trucks provides high frequency automatic intelligent charging for 6V or 12V lead-acid, flooded, or sealed maintenance-free (AGM and Gell Cell)...

Product#: 2444442

1966-74 Chrysler, Dodge, Plymouth; Starter Relay

Quality replacement starter relay designed for use on all 1966-74 Chrysler, Dodge and Plymouth models. This starter relay mounts on the inner fenderwell near the battery. Will fit and install on all 1966-74 Chrysler, Dodge,...

Product#: 2822126

1967-78 Dodge, Plymouth; Horn Switch; for A, B, C, E, F , Mopar Truck

OER Reproduction horn switch that fits a wide variety of Chrysler, Plymouth & Dodge models. Produced in stamped steel and injection molded ABS same as the original Mopar contact. An excellent replacement switch to help...

Product#: MD9341

1962-81 AMC, Chrysler, Dodge, Plymouth; Headlamp Switch; 7 Terminals Plus Ground; with 1-5/8" Rheostat

Reproduction headlamp switch for various 1962-74 Mopar A and B-Body models and other vehicle models as listed. This switch features 7 terminals, plus 1 ground terminal on the bottom rear portion of the switch that can be used...

Product#: MD6417

1968-76 Neutral Safety Switch Pig Tail; Repair Harness; 3 Prong Connector

Reproduction neutral safety switch harness and socket used to replace the old or damaged harness and connector on various 1968-2002 AMC, Chrysler, Dodge, and Plymouth models. This replacement wiring includes the socket and...

Product#: 7804414

1969-94 Chevrolet, Oldsmobile, Pontiac; Switch; Ignition Buzzer; Key Alarm; For Models Without Tilt Wheel

New reproduction ignition key buzzer switch to fit a wide variety of 1969-94 GM models without a tilt steering column.  You can now replace your broken or missing buzzer switch with this new factory OEM style replacement part...

Product#: 7811092

1969-94 Chevrolet, Oldsmobile, Pontiac; Switch; Ignition Buzzer; Key Alarm; For Models With Tilt

New reproduction ignition key buzzer switch to fit a wide variety of 1969-94 GM models with a tilt steering column.  You can now replace your broken or missing buzzer switch with this new factory OEM style replacement part to...

Product#: MD9340

1962-81 AMC, Chrysler, Dodge, Plymouth; Headlamp Switch; 7-Terminal; with 1-5/8" Rheostat

Reproduction headlamp switch for various 1962-76 Mopar A and B-Body models. This 7 terminal switch does not have a ground terminal on the bottom of the backside or rear of switch. This switch features a 1-5/8" ceramic...

Product#: 10626

Top Post Battery Cable Terminal

Due to the corrosive nature of battery electrolyte, the original lead cast positive and negative terminal ends usually require replacement every few years. We offer these replacement OEM type terminals for use on top post...

Product#: A17690

1967-90 AMC/Chrysler/GM/Ford; Wiring Connector; 2-Terminal; Female; Various Applications

Reproduction 2-terminal wiring connector with pigtail to fit a wide variety of AMC and GM applications. This connector is used on relays, AC clutch cycle switches, AC compressor, back-up lamp switches, HVAC components,...

Product#: 2534814

Dodge, Plymouth A, B, E Body; Battery Hold Down J-Bolt; 7"

Reproduction of the original battery hold down J bolt designed for use with the Dodge and Plymouth models listed below. Each bolt is a reproduction of the original style battery hold down bolt. This is a 7" bolt. Refer to...

Product#: MH108

1968-74 Mopar Sparton Style Horn Assemblies - High And Low Set - Various Models - See Applications

Correct OER® reproduction of the Sparton horns designed for various 1968-74 Mopar models. Each horn is designed with the Dodge and Plymouth "folded horn" design for proper sound and correct pitch. Manufactured to factory...

Product#: K0076

Front Fender Wire Harness Straps; 2-1/4" Long; Black Nylon

A hot exhaust manifold can cause serious damage to your electrical system. If not properly fastened, the wiring harness leading to your alternator/generator or other wiring harnesses could fall into an open area between the...

Product#: MW931

1968-78 Chrysler, Dodge, Plymouth; Horn Switch; with Plastic Tuff Wheel Horn Cap Retainer

Service replacement horn contact assembly that fits a wide variety of Chrysler, Plymouth, and Dodge models. Produced in stamped steel and injection molded ABS just like the original Mopar contact. An excellent reproduction...

Product#: 21026

OER Smart Charger 800; Battery Charger And Maintainer; 12V; 0.8 Amp

The OER Smart Charger 800 battery charger and maintainer for classic cars and trucks provides high frequency automatic intelligent charging for 12V lead-acid, flooded, or sealed maintenance-free (AGM and Gell Cell) batteries....

Product#: DS121

Headlamp Switch; 3 Position; Universal Fit

Universal fit headlamp switch for a wide variety of vehicle applications from the 1940's and beyond. Each switch features 3 position push/pull functionality with knob and shaft. Required a 3/8 diameter hole for mounting, and...