Product#: MD2234

1960-76 Dodge, Plymouth A, B & E-Body; Heater Hose Tie Strap; Each

Reproduction heater hose tie strap for all 1960-76 Dodge and Plymouth A, B, and E-Body models. Manufactured from correct gauge aluminum for an original appearance. This strap has various purposes. Most commonly it was used to...


Product#: K556

1947-2008 GM; Heater Hose Bracket Set; Various Applications

This hose bracket set is designed to secure a pair of heater hoses to the inner fender skirt and the alternator bracket to prevent damage of the hoses and keep the engine compartment neat and tidy in appearance. These...


Product#: R045010

Sanden SD-7B10 / 7176 Peanut Style Compressor Discharge Adapter Fitting; Straight / #10 / O-Ring

Vintage Air O-ring adapter fitting for Sanden / Sankyo style SD7B10 "Peanut" compact AC compressors. This aluminum adapter will bolt directly to the suction inlet flange, converting it to -10AN male thread. Sold individually.


Product#: MA136

1967-76 Mopar A-Body With AC Dash Vent And Hose Set

Replace the discolored, missing or deteriorated dash vents in your classic with this brand new reproduction vent and hose set from Classic Industries®. The vents are located on top of the dash on each side of the...


Product#: MD2250

1974 Mopar A, B & E-Body With AC Heater Hose Set

This reproduction heater hose set includes two correctly grooved & marked hoses cut in 4 ft. lengths with spring clamps and two aluminum tie straps. A/C equipped cars have extra length or curved bypass hose with correct...


Product#: AE156214

Alter Ego 1562 Series; Insulated Billet Aluminum Line Clamp; Separting; 1/2" to 1-1/8" OD; 4-Hole

Alter Ego 1562 Series insulated billet aluminum line clamp/separator with Delrin inserts. These clamps are great for cleaning up your engine bay. Safe for use with most hard and soft fluid and air lines. Perfect for custom...


Product#: S7314

44" Chrome Stainless Steel Flexible Heater Hose Set; With Chrome Ends

Ideal replacements for worn or rotted heater hoses. Non-corrosive stainless steel construction conforms to tight bends and holds shape indefinitely. Rated for high temperatures and high pressure, this is the ultimate...


Product#: MD2256

1972 Mopar A, B & E-Body Heater Hose Set - Without AC

This reproduction heater hose set includes two correctly grooved and marked hoses cut in 4 ft. lengths, spring clamps and two aluminum tie straps. Numbers stamped on hoses: 2963402 / 1343689 Mopar Aut hentic...


Product#: MD2257

1973 Mopar A, B, & E-Body Without AC Heater Hose Set

This reproduction heater hose set includes two correctly grooved and marked hoses cut in 4 ft. lengths, spring clamps and two aluminum tie straps. Numbers stamped on hoses: 2936392 / 2837398 Mopar Aut hentic...


Product#: MD2258

1974 Mopar A, B & E-Body Without AC Heater Hose Set

This reproduction heater hose set includes two correctly grooved and marked hoses cut in 4 ft. lengths, spring clamps and two aluminum tie straps. Numbers stamped on hoses: 3441274 / 2837398 Mopar Aut hentic...


Product#: S7313

44" Chrome Stainless Steel Flexible Heater Hose Set; With Polished Ends

Ideal replacements for worn or rotted heater hoses. Non-corrosive stainless steel construction conforms to tight bends and holds shape indefinitely. Rated for high temperatures and high pressure, this is the ultimate...


Product#: AE156213

Alter Ego 1562 Series; Insulated Billet Aluminum Line Clamp; Separting; 1/2" to 1-1/8" OD; 3-Hole

Alter Ego 1562 Series insulated billet aluminum line clamp/separator with Delrin inserts. These clamps are great for cleaning up your engine bay. Safe for use with most hard and soft fluid and air lines. Perfect for custom...


Product#: R045024

GM R4 Compressor Rear Adapter Block - #8 / #10

Vintage Air rear block-face adapter block for GM R4 vertical air conditioning compressors. This aluminum adapter will bolt directly to the rear flange, converting it to -8AN and -10AN male thread. Sold individually.


Product#: PF1025

Stainless Steel Heater Hose Fittings - 1/2" NPT - 5/8" i.d. x 1-3/4" L & 2-7/8" w/ 1/2" L Pipe Plugs

These replacement fittings can be threaded into the water pump or intake manifold to provide heater hose or bypass hose attachment points. Avaliable in several different sizes. Set includes: 5/8" hose ID, 1-3/4" length...


Product#: PF1024

Stainless Steel Heater Hose Fittings - 1/2" NPT - 5/8" i.d. x 1-3/4" L with 1/2" L Pipe Plugs

These replacement fittings can be threaded into the water pump or intake manifold to provide heater hose or bypass hose attachment points. Avaliable in several different sizes. Includes: (2) 5/8" hose ID, 1-3/4" length...


Product#: K0150

1965-2010 GM, Dodge, Plymouth; Water Nipple, Heater Hose Fittings; Pair

These replacement fittings can be threaded into the water pump or intake manifold to provide heater hose or bypass hose attachment points. Avaliable in several different sizes. 1/2" NPT - 5/8" i.d. x 1-1/2" L & 3/4" i.d. x...


Product#: AE106314

Alter Ego 1063 Series; Insulated Billet Aluminum Line Clamp; 3/16" to 5/8" OD; 4-Hole

Alter Ego 1063 Series insulated billet aluminum line clamp/separator with Delrin inserts. These clamps are great for cleaning up your engine bay. Safe for use with most hard and soft fluid and air lines. Perfect for custom...


Product#: PF1007

Stainless Steel Heater Hose Fittings - 1/2" NPT - 5/8" i.d. x 1-3/4" L & 5/8" i.d. x 2-7/8" L

These replacement fittings can be threaded into the water pump or intake manifold to provide heater hose or bypass hose attachment points. Avaliable in several different sizes. Includes: 5/8" hose ID, 1-3/4" length with...


Product#: AU5357

Corbin Heater Hose Clamp for 3/4" O.D. Hose; Each

OEM-Style Corbin 3/4" heater hose clamp designed for use with various makes and models. Most commonly used for 5/8" heater hose. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...


Product#: PF1006

Stainless Steel Heater Hose Fittings - 1/2" NPT - 5/8" i.d. x 1-3/4" L

These replacement fittings can be threaded into the water pump or intake manifold to provide heater hose or bypass hose attachment points. Avaliable in several different sizes. Includes: 5/8" hose ID, 1-3/4" length with...