Product#: FT6005C

1971-1976 Dart, Duster, Scamp, Valiant, Swinger; Fuel Tank; with Single Vent EEC; Stainless Steel; 16 Gallon Capacity

Correct reproduction of the original fuel tank designed for with 1971-1976 Dart, Duster, Scamp, Valiant, Swinger models. This reproduction fuel tank is manufactured in stainless steel replicating the original Mopar tank...


Product#: FT6005B

1971-76 Dart, Duster, Scamp, Valiant, Demon, Special, Swinger; Ni-Terne Coated Fuel Tank; with Single Vent EEC; 16 Gallon Capacity

Reproduction of the original fuel tank designed for use with 1971-1976 Dodge Dart, Plymouth Duster, Scamp, Demon, Special, Swinger, and all A Body models with EEC (evaporative emission control). This reproduction fuel tank is...


Product#: FT6005A

1971-76 Dart, Duster, Valiant, Scamp, Demon, Twister; Fuel Tank; Zinc Coated; with EEC; 16 Gallon Capacity

Reproduction of the original style 18-gallon fuel tank designed for use with 1971-76 Dodge Dart, Plymouth Duster, Valiant, Scamp, and Demon models with single vent EEC (evaporative emission control). Each fuel tank is...


Product#: UK915

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long

This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...


Product#: MF297

1970-75 Dodge/Plymouth; Fuel Tank Filler Neck Grommet

Reproduction fuel tank to filler neck rubber grommet to replace the old or worn out original. Replace brittle or deteriorated fuel tank filler neck grommets with this quality reproduction grommet to eliminate vapor or fuel...


Product#: AL124

Accelerator Throttle Rod; Universal Fit

Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...


Product#: MM8271

1960-1976 Chrysler, Dodge, Plymouth; Fuel Tank Mounting Studs ; Pair; OER

Reproduction of the original style fuel tank mounting studs designed for use on various 1960-1976 Mopar models. Fuel tank mounting studs, also known as J-bolts, are required when replacing your fuel tank straps. Manufactured...


Product#: MF368

1967-76 Dart, Barracuda, Valiant, Duster; Vented Fuel Cap

Reproduction of the original fuel cap designed for use with 1967-76 Dodge Dart and Plymouth Barracuda, Valiant, Duster, Scamp, and Swinger models. Each cap is manufactured to factory specifications featuring a primer coating...


Product#: MF255

1963-74 Dart, Barracuda, Valiant, Duster; Fuel Tank Sending Unit; 5/16" Outlet; Stainless Steel

Reproduction of the original fuel tank sending unit designed for use with a variety of 1963-74 Dodge and Plymouth models as listed below. After years of use, your fuel sending unit can wear out or stop working. When that...


Product#: FT6103B

1968-76 Dodge, Plymouth A Body; Fuel Tank Mounting Straps; Stainless Steel; Pair

Reproduction of the original style fuel tank mounting straps designed for use with 1968-76 Dodge and Plymouth A-Body models as listed below. Each strap is manufactured in quality stainless steel to original factory...


Product#: C67808

1959-1988 GM; Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps

Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...


Product#: CX5042

1954-59 Chevy, GMC Truck; Fuel Tank Sending Unit; Universal Fit; without Pick-Up Tube; 0-90 Ohm

Universal fuel tank sending unit for various GM and other models that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm gauges, each sending unit includes the sender, float, float rod, hardware,...


Product#: MF290

1962-76 Dodge, Plymouth; Fuel Sending Unit Ground Strap; 3-3/4" Steel

Reproduction of the original fuel tank sending unit ground strap designed for use with most 1962-76 Dodge and Plymouth A-body, B-body and E-body models. Attaches near the short fuel hose that joins the fuel tank sender line...


Product#: FT6103A

1968-76 Dart, Demon, Duster, Valiant, 1968-69 Barracuda; Fuel Tank Mounting Straps; EDP Coated Steel; Pair

Reproduction of the original fuel tank mounting strap designed for use with 1968-1976 Dodge Dart, Dart Sport Plymouth Duster, Demon, Twister, Swinger, Barracuda, and Valiant models. Each strap is manufactured in quality...


Product#: 3671724

1973-74 Mopar Accelerator Pedal Pad ; B,C,E-Body

Reproduction of the original accelerator pedal for 1973 B, C, and E-Body models. Manufactured with the correct details and grain texture for an authentic appearance. Includes pedal only. Correct for 1973 B, C, E-Body, but...


Product#: 9047E

Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length

Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...


Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
NEW

Product#: 9047G

Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length

Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your...


Product#: MF294

1962-76 Dodge, Plymouth A, B, E Body; Fuel Sending Unit Rubber Seal; 2-1/4" ID

Reproduction of the original rubber fuel sending unit seal designed for use with 1962-76 Dodge and Plymouth A, B, and E Body models. Replaces original Mopar part number # 1948757. We suggest replacing this seal every few...


Product#: MD2608

1971-72 Mopar Accelerator Pedal Hardware ; A, B, C, E Body ; Various Models

Reproduction of the original accelerator pedal hardware designed for use on 1971-72 A/B/C/E-Body Mopar models. Components are designed to attach the accelerator pedal to the vehicle. This hardware set includes the pedal...


Product#: TF700512

Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.

Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet...