Product#: K4122

Windshield/Back Glass; Butyl Rubber Sealant Tape; 3/8" Diameter Round Ribbon; 15-Foot Roll

OER butyl rubber sealant for installing front windshield or back glass installation. Can be used on virtually all models of Chrysler, GM, and Ford that did not use a contoured molded style weatherstrip for installation of the...


Product#: 3864327

Wiring Harness Firewall Retainer Gutter; 13" Long; OER

Reproduction firewall wiring harness gutter for a wide variety of vehicles. This reproduction wire harness gutter holds the engine harness as it passes against the firewall area to protect the wiring harness as it crosses...


Product#: MD2096

1964-74 Dodge/Plymouth A, B, E-Body; Trunk Weatherstrip; With Y Profile

Reproduction of the original trunk weatherstrip designed for use on various 1964-1973 Mopar A, B and E-Body models. Each trunk weatherstrip is designed in a Y profile configuration matching the original in fit and...


Product#: MD2077

1962-78 Dodge/Plymouth A, B & E-Body; Hood Adjust Bumper

Factory style replacement hood adjust bumper for 1962-78 A, B and E-Body models. Designed to factory specifications and manufactured in rubber to correctly replace the hood adjust bumper. This bumper features a 1-1/4" outer...


Product#: MB1182

1960-76 Dodge, Plymouth A, B, C-Body; Trunk Weatherstrip; OER

Reproduction of the original rear trunk weatherstrip designed to fit a variety of 1960-76 Chrysler, Dodge, and Plymouth. Each trunk weatherstrip is manufactured in durable EPDM rubber material in the correct configuration...


Product#: TF300249

1955-59 Truck, 1955 Car 4-Hole Wire Harness Grommet (Large)

Reproduction of the large 4-hole firewall wire harness grommet for all 1955 Chevrolet cars and 1955-59 Chevrolet and GMC trucks. Can also be used for custom or as a universal fit grommet for other applications. Measures 1...


Product#: MN3104

1967-74 Chrysler, Dodge, Plymouth; A, B-Body; Front Door Glass Channel Seals; with Clips; Pair

Reproduction front door glass channels for 1967-74 Dodge and Plymouth A-Body, and 1966-70 B-Body models as listed. These front door glass seals attach to the front of each door window in order to allow the glass to slide up...


Product#: MA9817

1967-72 Dart, Barracuda, Duster, Valiant; Door Frame Weatherstrip, 2 Door Coupe, Hardtop, Pair

Reproduction door frame weatherstrips seals for 1967-72 Dodge and Plymouth A-body 2-door models. Each door weatherstrip seal is manufactured from premium quality EPDM molded rubber replicating the original in design and...


Product#: MD2067

1962-70 Dodge/Plymouth A,B,E Body; Door Rubber Bumper; Each

Factory-style reproduction of the rubber door bumper that mounts to the door on 1962-70 Mopar A, B and E-Body vehicles. This rubber bumper is manufactured as original offering an authentic appearance and fit. Designed as an...


Product#: MA9819

1967-74 Dodge/Plymouth A-Body; Rubber Bumper Set

Factory-style reproduction rubber bumper set for various 1967-74 Dodge & Plymouth A-body models. Set includes (see note below): Door bumpers Hood side bumpers Hood adjust bumpers Ashtray bumpers Glove box bumpers ...


Product#: A1031

Nylon Fastener; 13/64" Dia. Stem; 13/32" Stem Length; For Door/Header Weatherstrip; Natural

This reproduction door weatherstrip clip is used on most GM vehicles which require plastic push in clips. These hook into holes in the door rubber weatherstripping and hold the weatherstrip to the door. Also used on Most GM...


Product#: MA9820

1971 Dodge/Plymouth A-Body; Rubber Bumper Set

Factory-style reproduction rubber bumper set for various 1971 Dodge & Plymouth A-body models. Set includes (see note below): Door bumpers Hood side bumpers Hood adjust bumpers Ashtray bumpers Glove box bumpers Trunk...


Product#: MD2075

1968-74 Dodge/Plymouth A, B & E-Body; Hood Side/Trunk Rubber Bumper; 7/8" X 7/8"

Factory-style replacement hood side stop and trunk bumper for various 1968-74 Mopar A, B and E-Body models. Designed to factory specifications to correctly replace the hood side stop or trunk bumper. Sold individually.


Product#: MA9824

1971-74 Dodge/Plymouth A-Body; Hood Side Rubber Bumper

OER reproduction hood side rubber bumper for the various 1971-74 Dodge and Plymouth A-Body models listed. Designed to factory specifications to correctly replace the hood stop bumper. Sold individually. Applications:...


Product#: MA9827

1970-72 Dart, Duster, Valiant; Roof Rail Weatherstrip; Fastback, Coupe, Pair

Reproduction of the original roof rail weatherstripping designed for use on 1970-72 Dodge Plymouth Duster and Valiant Fastback coupe A-body models with swing-out rear-quarter windows (only). The roof rail weatherstrip mounts...


Product#: A9711B

NotcHead Firewall Ring Kit Machine Finish

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4?, Two 5/8? and one 1/2?...


Product#: JJ010

Firewall Bracket & Boot w/ Polished Stainless Trim Ring for 1-7/8 - 2 1/8" Steering Columns

E-Z firewall bracket and rubber boot seal with stainless steel bezel. This bracket and boot kit cleans up the appearance of your firewall and seals out unwanted heat, noise, and fumes from your engine compartment. It can...


Product#: MA1869

1970-74 Mopar A-Body; Restoration Gasket Set; With Dana Rear Axle

Reproduction restoration gasket kit for various 1970-74 Mopar A-Body models. These gaskets are manufactured to original specifications for proper fit and appearance. Set Contains These Gaskets: Steering Column Master...


Product#: MN1809

1970-74 Mopar A-Body Super Body Plug Set

When doing a full restoration it is a very good idea to replace all of the body plugs under your vehicle. These plugs seal off bolts under your vehicle and prevent dirt from entering. This kit is similar to the standard...


Product#: MA822091A

1970-72 Duster; Demon, Scamp; Complete Splash Shield Set ; Automatic Trans

Reproduction of the original style splash shield designed for use with 1970-72 Plymouth Duster, Demon, Scamp models with automatic transmissions. Manufactured with .090 black masticated rubber (same as OEM) to look and fit...