Product#: K4122

1947-2010 Windshield & Back Glass; Butyl Rubber Sealant Tape; 3/8" Diameter Round Ribbon; 15-Foot Roll

OER butyl rubber sealant for installing front windshield or back glass installation. Can be used on virtually all models of Chrysler, GM, and Ford that did not use a contoured molded style weatherstrip for installation of the...

Product#: 3864327

1965-72 GM; Wiring Harness Firewall Retainer Gutter; 13" Long; OER

Reproduction firewall wiring harness gutter for a wide variety of vehicles. This reproduction wire harness gutter holds the engine harness as it passes against the firewall area to protect the wiring harness as it crosses...

Product#: *CR1105

1972-79 Dodge D/W Series; Window Seal; Inner/Outer; LH/RH; Set of 4

Reproduction of the original beltline windowfelt weatherstrip for 1972-79 Dodge D/W-Series truck models, 1974-79 Ramcharger, and 1974-79 Plymouth Trailduster. Acting as an antirattle seal, each windowfelt is designed to allow...

Product#: TF300249

1955-59 Truck, 1955 Car 4-Hole 1-5/8" OD Wire Harness Grommet (Large)

Reproduction of the large 4-hole firewall wire harness grommet for all 1955 Chevrolet cars and 1955-59 Chevrolet and GMC trucks. Can also be used for custom or as a universal fit grommet for other applications. Measures 1...

Product#: 4410574

Rubber Floor Pan Plug; 1-1/4" Diameter. Fits 1" Hole; Each

Reproduction rubber floor pan plug measures 1-1/4" diameter and fits a 1" hole. Sold individually, use as required.

Product#: A1031

Nylon Fastener; 13/64" Dia. Stem; 13/32" Stem Length; For Door/Header Weatherstrip; Natural

This reproduction door weatherstrip clip is used on most GM vehicles which require plastic push in clips. These hook into holes in the door rubber weatherstripping and hold the weatherstrip to the door. Also used on Most GM...

Product#: A9711B

NotcHead Firewall Ring Kit Machine Finish

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4?, Two 5/8? and one 1/2?...

Product#: DT22011

1972-77 Dodge D/W Series Truck; Vent Window Seal

Reproduction vent windaow glass seal set for 1972-77 D/W Series trucks and 1974-77 Ramcharger and Trailduster. This 2 piece set fits both driver and passenger doors of the vent assemblies. They are made to the original specs...

Product#: DT22005

1972-93 Dodge D/W Series Truck; Windshield Rubber Seal

Reproduction windshield seal for 1972-93 Dodge D/W Series Pickup Truck. This windshield seal has a trim groove and goes first on the body then the glass is placed in the opening. Made from ozone resistant EPDM rubber and from...

Product#: DT22010

1972-93 Dodge D/W Series Truck; Rear Glass Rubber Seal

Reproduction rear window seal for 1972-93 Dodge D/W Series Pickup Truck. This rear window seal goes first on the glass and is installed using the rope-in method. It is a standard black gasket without trim groove. Made from...

Product#: TF400507

1947-59 Chevy Truck, 1955-57 Bel Air, Tri-Five; Firewall Grommet; 4-Hole; Small

Reproduction of the original small 4-hole firewall wire harness grommet for use with all 1950-59 Chevrolet, GMC trucks, and 1955-57 Chevy Bel Air, 150, 210, Nomad models. Manufactured to EPDM rubber to factory specifications....

Product#: DT20006

1972-80 Dodge D/W Series Truck; 2WD; Radiator Splash Shield Seal w/ SS Clips

Reproduction frame rail splash shields for 1972-80 Dodge D/W Series Pickup Trucks, Ramcharger and Trailduster. These seals are constructed from.125" thick black masticated rubber exactly like the factory. These are often...

Product#: DT22019

1972-93 Dodge D/W Series, 1964-70 A Series Truck; 4-Piece Door Glass Run Channel Set

Reproduction door glass run channel set for 1972-93 Dodge D/W Series Pickup Trucks. This four piece set includes two division bar and two upper/rear doorframe weatherstrips, enough to do both doors on a regular cab truck....

Product#: DT22002

1972-77 Dodge D/W Series Truck; 2-Piece Door Seal Weatherstrip Set

Reproduction door seals for 1978 Dodge D/W Series Pickup Truck. This 2-piece set features the correct push clips installed in the top/rear run channels, just like the originals. Replaces Mopar part# 55023781. {specs}...

Product#: 500179

Universal Pass-Through Rubber Grommet; Fits 1/2" Hole with Single Wire Opening

Fits 0.5" hole and has a single wire opening for up to 16 gauge wire. Sometimes you are forced to punch a hole in your firewall to get additional wires into the engine compartment, but that hole you cut is sharp and can...

Product#: A9758P

NotcHead Firewall Ring for 5/8" Heater Hose or AC #8 - Polished Finish

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

Product#: A9712B

NotcHead Firewall Ring for 1/2" Heater Hose or AC #6 - Black Anodized Finish

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

Product#: DT20002

1972-81 Dodge D/W Series Truck; w/o Coolant Overflow; Radiator Splash Shield Seal w/ SS Clips

Reproduction radiator splash shield for 1972-81 Dodge D/W Series Pickup Truck. This seal is constructed from.125" thick black masticated rubber exactly like the factory. These are often missing on old trucks. Replacing it...

Product#: DT20004

1972-93 Dodge D/W Series Truck; Lower Radiator Splash Shield Seal w/ SS Clips

Reproduction lower radiator splash shield for 1972-93 Dodge D/W Series Pickup Truck. This seal is constructed from.125" thick black masticated rubber exactly like the factory. These are often missing on old trucks. Replacing...

Product#: DT20003

1972-81 Dodge D/W Series Truck; w/ Coolant Overflow; Radiator Splash Shield Seal w/ SS Clips

Reproduction radiator splash shield for 1972-81 Dodge D/W Series Pickup Truck. This seal is constructed from.125" thick black masticated rubber exactly like the factory. These are often missing on old trucks. Replacing it...