Product#: K772A

1957-89 Dodge, Plymouth A, B & E-Body; Upper Control Arm Ball Joint; OER

Reproduction of the original style upper control arm ball joint designed for use with 1962-74 Dodge and Plymouth B, and E-body models and select early and late A-body Models. These vital suspension components are commonly...


Product#: 154891

1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair

Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...


Product#: W1006

Coil Spring Insulator; 5-5/16" O.D.; 3-3/4" I.D.; 1/4" Thick

Reproduction of the original molded rubber coil spring insulator that mounts between the coil spring and the frame. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring insulators were not...


Product#: FSB904

1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Narrowed Crossmember:

Front sway bar kit for 1974-78 Ford Mustang II models. These 3/4" sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle handling and control. Offers all of the...


Product#: K783A

1962-76 Dodge/Plymouth; Ball Joint; With Steering Arm; For Lower Control Arm; LH

Reproduction lower ball joint, with steering arm, for the lower control arm on a wide variety of Dodge and Plymouth models. If your suspension rattles or makes noises when turning or going over bumps, it might be time to...


Product#: MK781A

1962-76 Dodge/Plymouth; Ball Joint; With Steering Arm; For Lower Control Arm; RH

Reproduction lower ball joint, with steering arm, for the lower control arm on a wide variety of Dodge and Plymouth models. If your suspension rattles or makes noises when turning or going over bumps, it might be time to...


Product#: MK408B

1960-76 Dodge/Plymouth A / B / E-Body; Control Arm Bushing Set; Upper; 4-Piece; Premium Quality

Premium quality reproduction of the original upper control arm bushings designed for use with 1960-76 Dodge and Plymouth A, B, and E body models. Each bushing is manufactured to correct factory specifications replicatin the...


Product#: A15589

Hex Nut 7/16-14

Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell...

Hex Nut 7/16-14

MSRP $0.99 ea
Classic $0.69 ea

Universal; 28" Yellow Powder Coated; Traction Bars; For Multi-Leaf Springs Only
FEATURED

Product#: LW20475

Universal; 28" Yellow Powder Coated; Traction Bars; For Multi-Leaf Springs Only

Designed to fit most leaf springs, these bars strengthen rear suspension and reduce wheel hop. They are constructed from heavy gauge rectangular steel and feature MIG welded brackets for extra strength. Rubber snubbers,...


Product#: FSB911

Front Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm, LH or RH

These universal front sway bar end link brackets are for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm. This is a universal bracket sold as a service part, it may...


Product#: H1112

1973-76 Mopar A-Body Hotchkis Tubular Upper Control Arms With Big Ball Joints

Install the geometry corrected Hotchkis Tubular Upper A-Arms and gain vastly increased handling and control. These 100% TIG welded, bolt-on arms offer an improved camber curve and increased caster. Features: TIG welded...


Product#: PM1306

1967-75 Mopar A-Body Core Support Stiffener W/Adj Width

1967-75 Mopar A-body The US Car Tool radiator core support is made from 12ga steel (twice as thick as than the OEM sheet metal) and adds much needed stiffening to the front frame rails and inner fenders while maintaining that...


Product#: MA4706

1963-66 Mopar A-Body Hellwig Motorsports 3/4" Rear Sway Bar Set

Reduce body roll and bring more balance to your classic's handling with this Hellwig Motorsports rear sway bar. Manufactured using heat-treated 4140 chromemoly spring steel, this sway bar reduces body roll even during tight...


Product#: PM2003

1963-75 Spring Hanger Relocaton Set Rear Shackle Mounts

1963-1975 Mopar A-Body Leaf Spring Relocation Kit REAR SHACKLE MOUNTS This is the two rear frame shackle mounts and bushing sleeves only. 1 left and 1 right. Designed to upgrade other kits that do not include the correct...


Product#: C222051

Competition Engineering Rear Coil-Over Shock Kit; Universal Design Allows Installation On A Variety Of Chassis.

Competition Engineering Rear Coil Over Shock Kit, Universal design allows installation on a variety of chassis. Complete kit includes 3 way Adjustable Shocks, Upper Mounts and Adjustable Lower Mounts. 3-Way Adjustable Shocks...


Product#: *MM8183

1960-76 Mopar A-Body Front Leaf Spring Mount Upgrade Panels

These replacement front leaf spring mount repair panels are manufactured in heavy gauge steel and will exceed factory specifications. Made in USA Sold as a pair. Note: Removal of the existing unit is required before...


Product#: MR3011

1973-74 Dart, Duster, Swinger, Valiant; Rear Leaf Spring; 5 Leaf Standard Duty; w/o 340, 360; Each

Reproduction of the original standard style rear leaf springs for use with 1973-74 Dart, Duster, Swinger, Scamp, and Valiant models (without 340ci, 360ci engines). Each leaf spring is manufactured to original factory...


Product#: H4014

1967-76 Mopar A-Body With 108" Wheelbase Hotchkis Weld-In Sub-Frame Connectors

One of the most important additions to your high performance classic Mopar is installing sub-frame connectors. Hotchkis Performance sub-frame connectors bridge the gap between the front frame rails and the rear frame rails,...


Product#: MM52311

1964-76 Mopar A-Body - QA1 Dynamic Strut Bar Set

Improve your Mopar's handling with QA1 Dynamic Strut Bars for 1964-76 A-Body models. These fully adjustable strut bars are a direct bolt-in for both aftermarket and factory K-members. Manufactured from 6061-T6 aluminum and...