1974 Buick Regal Parts

OER® Authorized reproduction steering coupler found on various models. Each coupler replicates the original in every detail. A worn out steering coupling joint will cause your vehicle?s steering to become loose or...

Reproduction replacement style windshield and rear window molding clips designed for use on the applications listed. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on...

Special fine thread 12-point bolt and fine thread nuts both with the same size hex with different inside diameter. Factory correct. Applications: 1967-81 Camaro without power steering 1964-72 Chevelle without power stee ring...

Wheel cylinder rebuild set is an exact match to the design of your vehicle?s original equipment. One set required per cylinder. Applications: 1973-75 Buick Regal 1967-75 Camaro rear with 7/8" bore cylinder 1981 Camaro export rear with 7/8" bore cylinder 1967-75Firebird rear with 7/8" bore cylinder 1981 Firebird export rear with 7/8" bore cylinder 1992-97 S10 / T10 Blazer rear with 7/8" bore cylinder 1977-93 Impala / full size rear with 9-1/2" drums and 7/8" bore cylinder 1990-91 Impala / Caprice except wagon rear with 11" drums and 7/8" bore cylinder 1994-96 Impala / Caprice rear with 9-1/2" drums and 7/8" bore cylinder 1977-93 Impala / full size rear with9-1/2" drums and 7/8" bore cylinder 1995-96 Impala / Caprice HD sedan, wagon, police or taxi rear with 11" x 2" drums and 7/8" bore cylinder 1964-74 Chevy II / Nova rear with 7/8" bore cylinder 1 964-74 X-Body rear with 7/8"bore cylinder

If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...

If you?re in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored...

If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...

Designed for outdoor use, this OER® Authorized WeatherBlocker™Plus cover is manufactured using a durable 4-layer non-woven material that provides a high level or protection from the elements and features a soft...

Don?t entrust the life of your engine to old hoses suffering from dry-rot and deterioration! Replace your old hoses with these quality molded hoses manufactured by Goodyear. Each hose features the correct bends for a factory...

If you?re in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored...

If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you need to rebuild the suspension . This correct replacement control arm bushing will add new life to your suspension. Sold individually. Applications: 1973-77 Regal rear bushing only 1971-79 Camaro rear bushing only 1970- 74 Firebird front or rear bushing (1st design) 1975-79 Firebird rear bushing (2nd design) 1971-73 Impala / Full Size front or rear bushing 1974-79 Impala / Full Size rear bushing only

Correct nylon trim panel retainer (commonly referred to as "Christmas Tree" retainer) for use on a wide variety of GM models throughout the 1970's-90's. Some popular uses include using the pin for retaining the upper side...

OER®'s revolutionary formula provides 40% more coverage than standard dyes and lacquers, and actually penetrates and molecularly bonds to the surface to permanently seal in the color. Dries to the touch in 45 seconds,...

Premium HD Fuel Pump Wiring Kit is recommended for all Aeromotive electric fuel pumps 30-amp capable, fully loomed and 70% terminated.Kit Includes:30 Amp 12 VDC Automotive Relay30 Amp 12 VDC Circuit Breaker20 feet overall...

CRL Mohair Channel Liner is a black mohair lining material with rubberized backing. Apply adhesive to back of liner and bond to badly worn division bars and channels on vehicles and trucks. Relines guide bars on lock side of...

OER reproduction park lamp lenses, manufactured to factory specifications featuring the correct SAE and Pentastar markings. Each lens set features correct clear lens coloration and includes the lens-to-housing gaskets. Mopar...

Reproduction rear center bumper filler panel for 1975-79 Nova models. This panel is hand-fabricated in flexible fiberglass and requires substantial bodywork, which may include sanding, trimming, cutting and drilling, in order...

Die cast reproduction seat medallions found on 1969 Coronet and Super Bee models with bucket seats. Features correct glossy black fill for an exact replacement.

When installing a new differential cover or reinstalling your original, always use a new differential cover gasket. We offer these high quality pre-formed gaskets for GM trucks with 10, 12, and 14 bolt rear differential...

Edelbrock Thunder Series carburetors share all the performance advantages of the popular Performer Series but with innovative new features. These carburetors include distinctive black hardware, dual fuel inlets (shipped with...

Edelbrock Thunder Series carburetors share all the performance advantages of the popular Performer Series but with innovative new features. These carburetors include distinctive black hardware, dual fuel inlets (shipped with...

Edelbrock Thunder Series carburetors share all the performance advantages of the popular Performer Series but with innovative new features. These carburetors include distinctive black hardware, dual fuel inlets (shipped with...

Edelbrock Thunder Series carburetors share all the performance advantages of the popular Performer Series but with innovative new features. These carburetors include distinctive black hardware, dual fuel inlets (shipped with...

Ready to convert your V8 from a carburetor to a basic affordable EFI system? Then E-Street 2 EFI is your best option. Most system conversions can be completed in a single day requiring only basic mechanical skills and minimal...

Ready to convert your V8 from a carburetor to a basic affordable EFI system? Then E-Street 2 EFI is your best option. Most system conversions can be completed in a single day requiring only basic mechanical skills and minimal...

After disassembling and gutting your car, it is easy to feel that you're in way over your head when it comes to the upholstery. This is why so many do-it-yourself restorers outsource the work, at considerable expense, to an...

Made to the original factory specifications from OEM quality injected molded soft urethane, this Center Console Pad features the correct grain texture pattern for a perfect restoration.

RedLine LumTronix headlamps allow 50% more light to shine through thanks to their crystal clear lenses and a special side lens that extends past the retaining ring. This side lens is a true a safety innovation and was...

RedLine LumTronix headlamps allow 50% more light to shine through thanks to their crystal clear lenses and a special side lens that extends past the retaining ring. This side lens is a true a safety innovation and was...

OER reproduction windshield wiper blade insert for various Dodge and Plymouth models from 1954-74. These 16" wiper blades are manufactured from quality molded rubber as original. Sold individually. Applications: 1954-74...

If you?re in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored...

Stainless trim for 1965-73 Mustang Manual Trans. Features metal tabs on the backside to make installation on your Mustang a breeze.

Beautifully chromed, heavy gauge steel with easy snap in grommets eliminates the need for removing wires for quick installation. Sold as a pair.

Beautiful reproduction of the original style shift knobs used with GM 4 speed transmissions of the 1960s. This black shift knob consist of the upper shift ball and a lower chrome lock nut. Note: May be installed on...

This coupler connects the intermediate shaft to the steering column on several GM models with a 1" 48 spline x 3/4" double D shape.

OER® manufactured heat shield for all GM models with a Holley 4 bbl Carburetor. This heat shield will help cool the intake charge for better performance. Features original part number and firing order. You are assured...

Forever Sharps' popular wood steering wheels offer outstanding quality and a sleek design to match your vehicle and style! Each wheel is manufactured from real mahogany wood and features steel spokes along with finger...

HushMat Ultra is a 1.5 mm (approx. 1/8") thick pressure-sensitive, constrained-layer damping material with excellent adhesion properties. HushMat Ultra comes in easy to handle square or rectangular sheets that are easily...

The supercharger and turbocharger in their various forms and applications have both been around for well over a century. What makes them so popular? Looks, power, performance, sound, and status. And how do they relate to, and...

Exhaust tip with straight-edge, angle-cut end. This weld-on tip is finished with an embossed Flowmaster logo. Made in USA Sold indivi dually.

The new Sportline series of seats by Corbeau has a look and feel that is second to none. Each seat features unbelievable comfort, style, and support, plus top of the line injection molded foam, bolsters that hold you in the...

Reproduction of the original console top plate designed for use on 1970 Mustangs with 4/speed and standard interiors. Manufactured to exact factort specifications for an authentic fit and appearance.

Upkeep with a lustrous, high gloss finish can be a pain, but it doesn't have to be. OER® Secret Formula Waterless Wash is just the thing to maintain your mirror-finish in between washes. Can be used as a waterless car...

A stylish tan cap with black brim featuring an embroidered Mustang "Running Horse" logo in metallic silver. Each cap includes an adjustable back strap so that 1 size fits most. Makes a great gift for any Mustang enthusiast!

Clay pulls out all the contaminants you cannot see, but that you can definitely feel, like industrial fallout, rail dust, and brake dust. Though these contaminants are not visible, you can tell they are there because the...

The muscle car era, and the era that immediately preceded it, are a unique window in time; it is one that we will not likely see again. Post-war USA was a place where people wanted to move on from the horrors of conflict, to...

OER® Rust Inhibitor is durable clear coating that protects any metal substrate from rust and corrosion for up to 7 years. It provides a superior bond to treated and non treated surfaces such as undercarriage, suspension...

3/8? thick 1lb. per sq. ft. of mass loaded barrier material bonded to a layer of marine grade acoustic foam. Intended for use as a second layer of insulation. Combined with a layer of Boom Mat to produce the quietest ride...

XTC is a high temperature/heat resistant coating formulated specifically to protect metal surfaces operating at temperatures from 500° F to 1500° F. With proper preparation, XTC provides outstanding adhesion, film integrity,...

Each plate is triple chrome plated for a beautiful and custom finish. For use with GM cables.

All Lokar throttle cables are designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate...

Boom Mat acoustic damping material reduces or eliminates the low frequency noise problems found in vehicles with performance upgrades. Constructed of a viscoelastic polymer layer bonded to a durable aluminum wear surface. It...

Performer Series carburetors complete the Edelbrock Power Package System for a smooth running and great performing "no guesswork" parts combination. Edelbrock carbs put the fun back into your driving because of their unique...

Dress up your engine bay with this stylish fan spacer bolt set. The logos is stamped directly onto the head of the bolts. Make a stunning statement with this true bolt-on customization!

Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...

Build your own custom coolant tubing system or add onto a basic set with this individual component. This mandrel bend tube features beaded ends for a positive seal.

This sleek and stylish Mishimoto universal front-mount intercooler will provide the perfect cooling capacity needed for turbo applications. These Mishimoto intercoolers are constructed of TIG welded 6061 aluminum with black...

The 1967-1981 Camaros and Firebirds are enduring classics that include the Z28, Firebird Formula 400, and the Smokey and the Bandit edition Trans Ams. But many owners want their rides to have the latest and greatest in GM...

This bodyshop safe, 100% wax and silicone free polish will prepare any paint for the perfect sealant. Rapidly remove light scratches, swirls, key scratches, fingernail scratches, and other imperfections. Will eliminate 1500...

Reproduction of the original park lamp lens designed for use on 1969-70 Mustangs. Park lamp lenses are located under the bumper on the outside of the opening in the front valance. This authentic reproduction is manufactured...