1974 Chevrolet Nova Parts - Body Panels

This patch panel replaces the lower front section from the front edge of the quarter panel to the center of the wheel well opening and extends up to the center body line. This patch panel will repair a commonly rusted out...

This patch panel replaces the lower front section from the front edge of the quarter panel to the center of the wheel well opening and extends up to the center body line. This patch panel will repair a commonly rusted out...

Reproduction inner cowl panel for all 1968-74 Chevy II/Nova models. Manufactured from heavy steel gauge, features correct contours and is EDP coated for rust prevention. Note: Shipped double oversize.

Reproduction of the original tail lamp panel designed for use with 1973-74 Chevrolet Nova models. Manufactured in stamped steel replicating the original OE panel in quality and design. Finally there's a solution to the rusty...

This reproduction quarter panel skin is an excellent option if you have rust around the wheel well areas, dents or minor damage when replacing the full panel is not neccssary. The skin extends to the top crease of the...

Reproduction rear floor repair panel for 1968-76 Nova models. This panel repairs the foot area for the rear passenger and features correct gauge steel, stiffening ridges, come EDP coated for rust prevention and have...

Repoduction of the quarter panel skin designed for use on 1973-74 Nova and GM X-body 2 door models. Manufactured in quality stamped steel replicating the original configuration. This quarter skin is an excellent replacement...

This quarter panel skin is an excellent option if you have rust around the wheel well areas, dents, or minor damage when replacing the full quarter panel is not necessary. The quarter panel skin extends to the top crease of...

Repoduction of the quarter panel skin designed for use on 1973-74 Nova 2 door models. Manufactured in quality stamped steel replicating the original configuration. This quarter skin is an excellent replacement if you have...

Replacement cowl vent panel side seals for 1967-69 Camaro, Firebird models and 1968-74 Chevy II/Nova models. These seals glue to the cowl vent panel. They help to protect the interior of the car from water getting inside.

Correct reproduction of the original outer wheelhouse panel designed for use on 1968-74 Chevy II, Nova and GM X body models. Each panel is manufactured in quality stamped steel replicating the original outer wheelhouse panel....

Correct reproduction of the original outer wheelhouse panel designed for use on 1968-74 Chevy II, Nova and GM X body models. Each panel is manufactured in quality stamped steel replicating the original outer wheelhouse panel....

Reproduction of the original cowl top vent grill panel for use on 1968-74 Chevy II, Nova and GM X body models. Each grill is manufactured in stamped steel to factory specifications featuring correct contours and mounting...

Reproduction of the original toe board section for use with 1968-74 Chevy II, Nova and GM X-body models. Manufactured in quality stamped steel that replicates the original front toe-board section that repairs the area between...

Reproduction of the original toe board section for use with 1968-74 Chevy II, Nova and GM X-body models. Manufactured in quality stamped steel that replicates the original front toe-board section that repairs the area between...

Replace the rusted out lower section of the outer door skin with this 7" high patch panel. Eliminates the need to replace the entire panel.

Replace the rusted out lower section of the outer door skin with this 7" high patch panel. Eliminates the need to replace the entire panel.

Reproduction of the outer rocker panel that fits directly below the door area and between the wheel wells. Note: Shipped double oversize.

Reproduction of the outer rocker panel that fits directly below the door area and between the wheel wells. Note: Shipped double oversize.

Reproduction of the outer rocker panel that fits directly below the door area and between the wheel wells. Note: Shipped double oversize.

Reproduction of the outer rocker panel that fits directly below the door area and between the wheel wells. Note: Shipped double oversize.

Reproduction of the original trunk to quarter panel filler designed for use on 1968-74 Chevy II, Nova and GM X-body models. Manufactured is quality stamped steel, this filler panel will replace the commonly rusted area from...

Reproduction of the original center quarter repair panel for use with 1968-74 Chevy II and Nova models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Reproduction of the original rear seat floor panel designed for use with 1968-74 Chevy II, Nova and GM X-body models.This stamped steel reproduction features correct ribbing, proper shaped drive shaft tunnel, properly...

Reproduction of the original rear half section of the quarter panel for use with 1968-74 Chevy II and Nova models. This patch panel will replace the lower rear quarter panel section from the area behind the rear bumper to the...

Reproduction of the original upper inner cowl panel designed for use with 1968-69 Camaro, Firebird models and 1968-74 Chevy II, Nova and GM X-Body models. Each panel is manufactured in stamped steel to original factory...

Reproduction of the original rear half section of the quarter panel for use with 1968-74 Chevy II and Nova models. This patch panel will replace the lower rear quarter panel section from the area behind the rear bumper to the...

Reproduction of the original center quarter repair panel for use with 1968-74 Chevy II and Nova models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Reproduction of the original trunk to quarter panel filler designed for use on 1968-74 Chevy II, Nova and GM X-body models. Manufactured is quality stamped steel, this filler panel will replace the commonly rusted area from...

Reproduction lower rear fender patch panel for 1968-74 Chevy II, Nova models. This front fender patch panel features EDP coating for rust prevention, correct front, rear, and lower profile. Each panel measures approximately...

Reproduction of the original front toe board panel designed for use with 1968-74 Chevy II Nova and GM X-body models. Manufactured in quality stamped steel that replicates the original front toe-board section that repairs the...

Quality reproduction of the original inner wheelhouse panel designed for use with 1968-74 Chevy II, Nova and X-body GM models. Manufactured to OE specifications in the correct configuration replicating the original in quality...

Quality reproduction of the original inner wheelhouse panel designed for use with 1968-74 Chevy II, Nova and X-body GM models. Manufactured to OE specifications in the correct configuration replicating the original in quality...

Reproduction lower rear fender patch panel for 1968-74 Chevy II, Nova models. This front fender patch panel features EDP coating for rust prevention, correct front, rear, and lower profile. Each panel measures approximately...

Reproduction of the original lower hinge pillar to rocker panel reinforcement section for use with 1967-69 Camaro, Firebird, and 1968-79 Chevy II, Nova and GM X-body models. Each panel is manufactured in stamped steel to...

Reproduction of the original outer cowl panel designed for use with various 1967-79 GM models including 1967-69 Camaro, Firebird, 1968-79 Nova, and GM X-body models. Each panel is manufactured in stamped steel to original...

Reproduction of the original lower hinge pillar to rocker panel reinforcement section for use with 1967-69 Camaro, Firebird, and 1968-79 Chevy II, Nova and GM X-body models. Each panel is manufactured in stamped steel to...

Reproduction of the original outer cowl panel designed for use with various 1967-79 GM models including 1967-69 Camaro, Firebird, 1968-79 Nova, and GM X-body models. Each panel is manufactured in stamped steel to original...

Reproduction of the original rear seat floor panel for use with 1968-1974 Chevy, II, Nova and GM X-body models. Manufactured in quality stamped steel that replicates the original rear seat floor panel configuration. Comes...

Outstanding pin style, lift off fiberglass replacement hood for your 1968-74 Chevy II/Nova. This fiberglass replacement will keep your vehicle looking original while reducing the weight. This version includes the actual cowl...

Reproduction of the original rear seat floor panel for use with 1968-1974 Chevy, II, Nova and GM X-body models. Manufactured in quality stamped steel that replicates the original rear seat floor panel configuration. Comes...

Replaces the lower section of the rear quarter panel from the bottom portion behind the bumper area to the wheel opening. This patch panel will allow you to replace the commonly rusted area without replacing the entire...

Replaces the lower section of the rear quarter panel from the bottom portion behind the bumper area to the wheel opening. This patch panel will allow you to replace the commonly rusted area without replacing the entire...

Replace your rusted or damaged cowl side panel with this quality reproduction. This panel installs behind the fender at the side of the firewall. Made in USA. Chevrolet Applications: 1967-69 Camaro 1968-79 Chevy II / Nova Buick Applications: 1973-74 Apollo 1975-79 Skylark Oldsmobile Applications: 1973-79 Omega Pontiac Applications: 1967-69 Firebird 1971-77 Ventura 1974 GTO 1977-79 Phoenix Important: This panel requires welding for installation. Profession al installation is recommended to ensure proper fit. Click here to read Important Information Before Installing Sheet Metal!

Replace your rusted or damaged cowl side panel with this quality reproduction. This panel installs behind the fender at the side of the firewall. Made in USA. Chevrolet Applications: 1967-69 Camaro 1968-79 Chevy II / Nova Buick Applications: 1973-74 Apollo 1975-79 Skylark Oldsmobile Applications: 1973-79 Omega Pontiac Applications: 1967-69 Firebird 1971-77 Ventura 1974 GTO 1977-79 Phoenix Important: This panel requires welding for installation. Profession al installation is recommended to ensure proper fit. Click here to read Important Information Before Installing Sheet Metal!

Reproduction cowl top inner panel to replace the inner rusted or damaged section on your 1968-69 Camaro, and 1968-74 Chevy II/Nova and other X-body models. Features oval wiper motor opening. Made in USA Chevrolet Applications: 1968-69 Camaro - Without AC 1968-74 Chevy II / Nova - Without AC Buick Applications: 1973-74 Apollo - Without AC Oldsmobile Applications: 1973-74 Omega - Without AC Pontiac Applications: 1968-69 Firebird - Without AC 1971-74 Ventura - Without AC 1974 GTO - Without AC Important: This panel requires welding for installation. Professional installation is recommended to ensure proper fit. Click here to read Important Information Before Installing Sheet Metal! Note: Shipped double oversize.

Beautify your engine or trunk compartments with this awesome looking custom cut mirror set. The mirrors are made of 1/8" thick lightweight and heat resistant plastic and are professionally designed to fit perfectly to your...

Beautify your engine or trunk compartments with this awesome looking custom cut mirror set. The mirrors are made of 1/8" thick lightweight and heat resistant plastic and are professionally designed to fit perfectly to your...

This is an OE style replacement hood specifically designed for 1973-74 Chevy Nova models. Manufactured in stamped steel featuring a custom, Cowl Induction center scoop for the owner who wants a more aggressive,...

Reproduction of the original hood latch assembly for 1973-74 Chevrolet Nova models. Each hood latch is manufactured using high grade steel and produced to exact factory specifications. Replaces the worn out or damaged...

This Restorer's Choice™ factory-style reproduction front fender is manufactured in high-grade OE-gauge stamped steel to factory specifications and will install, function and appear like original. Show quality...

This Restorer's Choice™ factory-style reproduction front fender is manufactured in high-grade OE-gauge stamped steel to factory specifications and will install, function and appear like original. Show quality...

Reproduction of the original front fender designed for use with 1970-74 Chevrolet Nova models. Manufactured in quality stamped steel to original factory specifications. Fender will install as original and is produced with...

Reproduction of the original front fender designed for use with 1970-74 Chevrolet Nova models. Manufactured in quality stamped steel to original factory specifications. Fender will install as original and is produced with...

Factory Nova models featured fairly small tires by today's standards. These cars cry out for bigger tire and wheel combinations which will not fit in stock form. These fiberglass wheel openings allow you to do what the...

This Firewall Delete plate gives your engine bay a clean, custom look. The firewall delete plate is an excellent way to smooth your firewall when installing an aftermarket AC system. This panel smooths the passenger side...

Reproduction of the original trunk floor drop off end cap designed for use with 1968-74 Chevy II, Nova and GM X-body models. Manufactured in quality stamped steel to OE factory specifications replicating the original in...

This fiberglass door shell will enable you to replace your damaged or rusted door with long lasting-durable fiberglass replacements. OEM style hinge and latch mounting pads are reinforced and accept OEM hardware for easy...

Reproduction of the front seat floor brace designed for use with 1968-74 Chevrolet Chevy II, Nova and X-body GM models.  Manufactured in quality stamped steel to the original factory configuration. Each brace is designed to...

High quality reproduction of the original weatherstrip seal which attaches to the cowl panel and seals the area between the hood and windshield. This reproduction is manufactured to exact specifications allowing the seal to...