Product#: UK915

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long

This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...


Product#: C67808

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps

Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...


Product#: CX5042

1954-59 Chevy, GMC Truck; Fuel Tank Sending Unit; Universal Fit; without Pick-Up Tube; 0-90 Ohm

Universal fuel tank sending unit for various GM and other models that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm gauges, each sending unit includes the sender, float, float rod, hardware,...


Product#: K915

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps

Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x .060"...


Product#: T76063

Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap

Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...


Product#: CX5041

1954-59 Chevy, GMC Truck; Fuel Tank Sending Unit; Universal Fit; w/o Pick-Up Tube; 0-30 Ohm

Universal fuel tank sending unit for various GM and other models that require a 30 ohm sender. Designed for use with OE or aftermarket 0-30 ohm gauges, each sending unit includes the sender, float, float rod, hardware,...


Product#: MF292

1962-76 Dodge, Plymouth A, B, E Body; Fuel Tank Sender Lock Ring and Rubber Gasket

Reproduction of the original style fuel sending unit lock ring and gasket designed for use with various 1962-1976 Dodge and Plymouth models as listed. Install the sending unit on your vehicle with the quality replacement...


Product#: 265385

EFI Fuel Return Adapter Set

When converting a carbureted vehicle to an EFI system that requires a fuel return system, there's no longer any need to buy an expensive fuel tank. This adapter creates a return system simply by cutting a 2-3/4" section out...

EFI Fuel Return Adapter Set

MSRP $69.99 set
Classic $62.99 set

Product#: FTA45111

Universal Fuel / Gas Tank Return Line Fitting Conversion Install Kit

If you are installing an in-line fuel pump or an aftermarket fuel-injection setup but are using an original fuel tank not originally provisioned for a return line, this universal return line fitting kit is a simple and...


Product#: 13A024D

Dakota Digital Universal Gear Shift Sending Unit

Gear Shift Position Sending Unit for use with all Dakota Digital HDX, VFD and VHX Instrument Systems, Gear Shift Position Indicators and 12 volt LED indicators. Includes: Universal Mounting Hardware to fit all automatic...


Holley Easy Level Feul Level Sending Unit w/ LiDAR Technology
NEW

Product#: H19250

Holley Easy Level Feul Level Sending Unit w/ LiDAR Technology

The Holley Easy Level sender uses LiDAR technology to precisely measure the depth of fuel remaining in your tank and works with all Classic Instruments' fuel gauges, including short-sweep, full-sweep, and selectable ohm range...


Product#: AM9109

Autometer; Universal; Fuel Signal Adaptor for Autometer Gauges;

The Fuel Bridge wires in between your fuel level gauge and sending unit and allows you to use any AutoMeter fuel level gauge with any stock or aftermarket sending unit. The triple push button with LED display allows for easy...


Product#: 19161

Holley Sniper EFI; Fuel Tank Sending Unit; 0-90 Ohms

Sniper EFI fuel gauge senders are a big help during your installation. They can be used as a replacement for your existing unit. Or if you decide to upgrade your dash to aftermarket gauges, we have a sending unit with the...


Product#: FTA45113

Universal Fuel / Gas Tank Return Line Fitting Conversion Install Kit

If you are installing an in-line fuel pump or an aftermarket fuel-injection setup but are using an original fuel tank not originally provisioned for a return line, this universal return line fitting kit is a simple and...


Product#: M265

Aluminum Flip Top Fuel Cap Gasket; Universal

Rubber gasket for use with our custom aluminum flip top gas cap. Measures 5-1/8" OD, 3-1/4" ID. Six bolt pattern, 4-1/2" center to center.


Product#: 567PL

Gas Tank Drain Plug; 1/4" PT-19 Thread

Replacement gas tank drain plug. Drain plug is 1/4" PT - 19 thread.


Product#: AM3262

Auto Meter Universal Fuel Tank Sending Unit

This is a universal 5-bolt fuel sending unit for use with Auto Meter universal fuel gauges. This unit is not included with the gauges packages and must be purchased separately. It is used with gauges that require 240 ohms...


Universal Flush Mount Fuel Filler Kit
FEATURED

Product#: CX2140

Universal Flush Mount Fuel Filler Kit

This universal flush mount fuel filler kit can be used on any applications. The polished stainless steel filler is ideal for fuel tank conversion. Features a tethered cap, cap key, and 3 mounting holes for an easy...