Product#: 9047E

Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length

Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...


Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
NEW

Product#: 9047G

Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length

Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your...


Product#: K0050

1961-82; GM; Pinch Hose Clamp; for Fuel or Vacuum; 3/8"; Olive Green

Reproduction of the original style green pinch clamp for use with 3/8" fuel or vacuum hoses. This clamp is commonly found on the hose connecting the fuel tank float to the main fuel line leading to the engine. Most commonly...


Product#: K0052

1961-82; GM; Pinch Hose Clamp; for Fuel Hose or Vacuum Hose; 1/4"; Red

Reproduction of the original style red pinch clamp for use with 1/4" fuel hose or vacuum hose for use with various 1962-82 GM models as listed. This clamp is commonly found on the fuel vapor return line connecting the fuel...


Product#: MF358

3/8" Non-Date Coded Factory Style Steel Fuel Filter Set

This 3/8" fuel filter is printed with the correct shade of blue and feature the same markings as our date-coded filters but without the date code. These are a ?Factory Original? filter which is what would have been installed...


Product#: E8130

Edelbrock Blue Anodized Replacement Fuel Filter

This blue anodized replacement fuel filter is used with single or dual feed lines on Edelbrock Thunder Series or Performer series carburetors.


Product#: E8129

Edelbrock Polished Aluminum Replacement Fuel Filter

This fuel filter is used with single or dual feed lines on Edelbrock Thunder Series or Performer series carburetors.


Product#: MF312

3/8" Fuel Hose "Kv" Marked-3 Foot Piece

When authenticity is a top priority, you?ll want to be sure to install correctly marked fuel hose on your A-body, B-body or E-body vehicle. This concourse quality 3/8" fuel hose ?KV? marked hose in 3-foot lengths.


Product#: MF359

5/16" Non-Date Coded Replacement Style Steel Fuel Filter Set

These 5/16" fuel filters are printed with the correct shade of blue and feature the same markings as our date-coded filters but without the date code. These are a ?Mopar Replacement? which is what would have been sold over...


Product#: B67225

Billet Specialties 3/8" Billet Fuel Hose End w/ Clamp for Rubber Hose

Billet aluminum fuel hose clamp ends from Billet Specialties. Clean alternative to plain hose clamps or loud anodised colors. They are available for both braided and rubber hose and in most popular sizes.


Product#: A9700132

6-Piece NotcHead AN-4 or 7/16" Braided Line Clamp Set

NotcHead line fastening system for braided lines. This system will keep your braided lines secure and look great while doing it! Once fastened down with the included hardware, your lines will snap in and out of these clamps...


Product#: B67025

Billet Specialties 5/16" Billet Fuel Hose End w/ Clamp for Rubber Hose

Billet aluminum fuel hose clamp ends from Billet Specialties. Clean alternative to plain hose clamps or loud anodised colors. They are available for both braided and rubber hose and in most popular sizes.


Product#: H2225

MSD; High Pressure Electric Fuel Pump; Multiport EFI

Multiport EFI systems require a stable fuel supply to maintain best performance throughout the engine's rpm range.


Product#: B42320

Billet Specialties Ribbed Aluminum Fuel Filter - 3/8" Barb

Billet Specialties aluminum in-line fuel filters for carbureted applications. 4 1/2" x 1 3/8" housing with 3/8" hose barb fittings Note: Not for use with fuel injection systems.


Product#: A9700134

6-Piece NotcHead AN-8 or 5/8" Braided Line Clamp Set

NotcHead line fastening system for braided lines. This system will keep your braided lines secure and look great while doing it! Once fastened down with the included hardware, your lines will snap in and out of these clamps...


Product#: A9700133

6-Piece NotcHead AN-6 or 9/16" Braided Line Clamp Set

NotcHead line fastening system for braided lines. This system will keep your braided lines secure and look great while doing it! Once fastened down with the included hardware, your lines will snap in and out of these clamps...


Product#: B67325

Billet Specialties 3/8" Billet Fuel Hose End w/ Clamp for Braided Hose

Billet aluminum fuel hose clamp ends from Billet Specialties. Clean alternative to plain hose clamps or loud anodised colors. They are available for both braided and rubber hose and in most popular sizes.


Product#: A9700131

6-Piece NotcHead AN-3 or 1/4" Braided Line Clamp Set

NotcHead line fastening system for braided lines. This system will keep your braided lines secure and look great while doing it! Once fastened down with the included hardware, your lines will snap in and out of these clamps...


Product#: 380322

Fuel Hose Clamp ; 5/16"- 3/8"

Correct replacement fuel hose clamp for use on various models with 5/16" or 3/8" clamps. Measures .57-.63 flat wound spring clamp. Silver Dip Spin Coating. Sold individually. Use as required.