Product#: 3864327

1965-72 GM; Wiring Harness Firewall Retainer Gutter; 13" Long; OER

Reproduction firewall wiring harness gutter for a wide variety of vehicles. This reproduction wire harness gutter holds the engine harness as it passes against the firewall area to protect the wiring harness as it crosses...

Product#: K4122

1947-2010 Windshield & Back Glass; Butyl Rubber Sealant Tape; 3/8" Diameter Round Ribbon; 15-Foot Roll

OER butyl rubber sealant for installing front windshield or back glass installation. Can be used on virtually all models of Chrysler, GM, and Ford that did not use a contoured molded style weatherstrip for installation of the...

Product#: TF300249

1955-59 Truck, 1955 Car 4-Hole Wire Harness Grommet (Large)

Reproduction of the large 4-hole firewall wire harness grommet for all 1955 Chevrolet cars and 1955-59 Chevrolet and GMC trucks. Can also be used for custom or as a universal fit grommet for other applications. Measures 1...

Product#: 4410574

Rubber Floor Pan Plug; 1-1/4" Dia. Fits 1" hole.Each

Reproduction rubber floor pan plug measures 1-1/4" diameter and fits a 1" hole. Sold individually, use as required.

Product#: 7712535

1959-79 Buick, Chevy, Pontiac, Oldsmobile; Seat Back Bumper; Oval Style; Each; Various Models

Reproduction of the original oval style seat back bumper designed for use on various 1959-79 GM vehicles. Each bumper is manufactured in hard rubber including a steel core for added strength. The bumper is installed where the...

Product#: A1031

Nylon Fastener; 13/64" Dia. Stem; 13/32" Stem Length; For Door/Header Weatherstrip; Natural

This reproduction door weatherstrip clip is used on most GM vehicles which require plastic push in clips. These hook into holes in the door rubber weatherstripping and hold the weatherstrip to the door. Also used on Most GM...

Product#: 9841451

1961-83 GM; Rubber Bumper Stopper; 1-3/16" Long; Various Uses and Models; Each

Correct replacement of the rubber bumper for use on various GM models. This rubber stopper will help insure that your seat/hood is aligned properly. Sold individually. Use as required per vehicle. Buick Applications 1971-1972...

Product#: K2017

1955-81 Chevrolet, GMC, Pontiac; Air Cleaner Lid Rubber Seal; 59" Long x 5/16" Wide

Reproduction air cleaner lid seal for a variety of GM car and truck models as listed. Designed to seal the area between the lid and the base offering a tight seal for the air cleaner on models that required this seal. {specs}...

Product#: W2367

1971-75 GM Full Size; Convertible Top Frame Weatherstrip Set; 5 Piece Set

Reproduction of the original weatherstripping designed for use on 1971-75 Impala and various GM full size convertible models. Includes the front convertible top frame seal and the side roof rail seals (RH and LH). Replace...

Product#: A9711B

NotcHead Firewall Ring Kit Machine Finish

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4?, Two 5/8? and one 1/2?...

Product#: 152605

1971-76 Buick, Chevy, Pontiac, Oldsmobile Full Size; Convertible Top Header Seal; Various Models

Reproduction of the original convertible top header seal weatherstrip designed to seal the top frame to the top of the windshield. For use on 1971-75 GM B-body models and 1971-76 GM E-body vehicles. This weatherstrip is...

Product#: TF400507

1947-59 Chevy Truck, 1955-57 Bel Air, Tri-Five; Firewall Grommet; 4-Hole; Small

Reproduction of the original small 4-hole firewall wire harness grommet for use with all 1950-59 Chevrolet, GMC trucks, and 1955-57 Chevy Bel Air, 150, 210, Nomad models. Manufactured to EPDM rubber to factory specifications....

Product#: 500179

Universal Pass-Through Rubber Grommet; Fits 1/2" Hole with Single Wire Opening

Fits 0.5" hole and has a single wire opening for up to 16 gauge wire. Sometimes you are forced to punch a hole in your firewall to get additional wires into the engine compartment, but that hole you cut is sharp and can...

Product#: CP110

1971-76 Impala, Biscayne, Bel Air, Caprice; Inner Fender Splash Apron Seal Kit

Reproduction of the original style A-Arm seals for use with 1971-76 Chevrolet Impala, Bel Air, Biscayne, and Caprice models. Replace your old splash aprons with new reproductions and keep your engine compartment clean and...

Product#: A9758P

NotcHead Firewall Ring for 5/8" Heater Hose or AC #8 - Polished Finish

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

Product#: A9712B

NotcHead Firewall Ring for 1/2" Heater Hose or AC #6 - Black Anodized Finish

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

Product#: RD2032

1971-76 GM Full Size Vehicle; Front Door Weatherstrip; 4-Door Hardtop; Pair

Reproduction of the original front door weatherstrip designed for use with 1971-76 GM Full Size 4 door, hardtop models. Manufactured to correct dimensions in quality EPDM rubber offering an original appearance and fitment....

Product#: W2094

1971-76 Impala / Full Size Convertible Pillar Post Weatherstrip - Pair

Reproduction of the original pillar post weatherstripping designed for use on 1971-76 Impala and Full Size models. Manufactured in the correct configuration that installs on both pillar posts. Pillar post seals run vertically...

Product#: 152610

1974-76 Impala, Caprice; Roof Rail Weatherstrip; 2-Door Custom Coupe; Pair

Quality reproduction of the original weatherstrip seals designed for use on 1974-76 Impala and Caprice models with body style ending with 47. Weatherstrip is installed between the roof rail and door glass on custom coupe...

Product#: A9711M

NotcHead Firewall Ring Kit Black Hard Anodized Finish

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4?, Two 5/8? and one 1/2?...