Product#: K4122

Windshield/Back Glass; Butyl Rubber Sealant Tape; 3/8" Diameter Round Ribbon; 15-Foot Roll

OER butyl rubber sealant for installing front windshield or back glass installation. Can be used on virtually all models of Chrysler, GM, and Ford that did not use a contoured molded style weatherstrip for installation of the...


Product#: 3864327

Wiring Harness Firewall Retainer Gutter; 13" Long; OER

Reproduction firewall wiring harness gutter for a wide variety of vehicles. This reproduction wire harness gutter holds the engine harness as it passes against the firewall area to protect the wiring harness as it crosses...


Product#: MA9818

1973-76 Dart, Swinger, Duster, Scamp; Door Frame Weatherstrip, 2 door; Hardtop; Pair

Reproduction door frame weatherstrip for 1973-76 Dodge and Plymouth A-body models. This replacement door frame weatherstrip is designed to factory specifications and manufactured in rubber to correctly replace your brittle,...


Product#: MD2077

1962-78 Dodge/Plymouth A, B & E-Body; Hood Adjust Bumper

Factory style replacement hood adjust bumper for 1962-78 A, B and E-Body models. Designed to factory specifications and manufactured in rubber to correctly replace the hood adjust bumper. This bumper features a 1-1/4" outer...


Product#: MB1182

1960-76 Dodge, Plymouth A, B, C-Body; Trunk Weatherstrip; OER

Reproduction of the original rear trunk weatherstrip designed to fit a variety of 1960-76 Chrysler, Dodge, and Plymouth. Each trunk weatherstrip is manufactured in durable EPDM rubber material in the correct configuration...


Product#: MD2097

1971-76 Dodge/Plymouth A, B, E Body; Trunk Weatherstrip; With D Profile

Reproduction of the original trunk weatherstrip designed for use on various 1971-76 Mopar A, B and E-Body models. Each trunk weatherstrip is designed in a D profile configuration matching the original in fit and appearance....


Product#: TF300249

1955-59 Truck, 1955 Car 4-Hole Wire Harness Grommet (Large)

Reproduction of the large 4-hole firewall wire harness grommet for all 1955 Chevrolet cars and 1955-59 Chevrolet and GMC trucks. Can also be used for custom or as a universal fit grommet for other applications. Measures 1...


Product#: A1031

Nylon Fastener; 13/64" Dia. Stem; 13/32" Stem Length; For Door/Header Weatherstrip; Natural

This reproduction door weatherstrip clip is used on most GM vehicles which require plastic push in clips. These hook into holes in the door rubber weatherstripping and hold the weatherstrip to the door. Also used on Most GM...


Product#: MD2068

1971-79 Dodge/Plymouth A,B,E Body; Door Rubber Bumper; Each

Factory-style reproduction of the rubber door bumper that mounts to the door on 1972-79 Mopar A, B and E-Body vehicles. This rubber bumper is manufactured as original offering an authentic appearance and fit. Designed as an...


1968-1976 Dart, 1968-69 Barracuda, 1971-75 Scamp, Valiant; Front Windshield Weatherstrip; 2 Door Hardtop; Except Sport Models
FEATURED

Product#: MA9803

1968-1976 Dart, 1968-69 Barracuda, 1971-75 Scamp, Valiant; Front Windshield Weatherstrip; 2 Door Hardtop; Except Sport Models

Reproduction of the original windshield weatherstripping designed for use on various 1968-1976 Mopar A-body models as listed. This windshield seal is designed for the 2 door hardtop (except sport) models only. It works with...


Product#: MP41202

1967-76 Dart, Scamp; Rear Window Weatherstrip; 2 Door; Hardtop; w/Vinyl Top; One Piece Design

Reproduction of the original rear window weatherstripping designed for use with 1967-76 Dodge Dart and Plymouth Scamp 2 door hardtop models with a vinyl top. This one piece weatherstrip is manufactured with quality EPDM...


Product#: MA1174

1973-76 Dart; Door Glass Windowfelt Weatherstrip Set; Sedan; 4 Door; Factory Style; 8 Piece Set - Brand: PUI

This 8 piece factory-style replacement door glass weatherstrip set includes the inner and outer window weatherstrips for the front door glass and rear quarter glass. Replacing your window felts will seal the window and help...


Product#: A9711B

NotcHead Firewall Ring Kit Machine Finish

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4?, Two 5/8? and one 1/2?...


Product#: JJ010

Firewall Bracket & Boot w/ Polished Stainless Trim Ring for 1-7/8 - 2 1/8" Steering Columns

E-Z firewall bracket and rubber boot seal with stainless steel bezel. This bracket and boot kit cleans up the appearance of your firewall and seals out unwanted heat, noise, and fumes from your engine compartment. It can...


Product#: MB1947

1962-74 Dodge, Plymouth B Body, 1963-76 A Body; Lower Inner Front Fender Splash Seals; Pair

Reproduction of the original lower inner front fender splash seals designed for use with 1962-74 Dodge, Plymouth B-Body, and 1963-74 A Body models as listed. These are the gaskets that feature a T-shaped clip. Each shield is...


Product#: MA820197

1974-76 Dodge Dart; Exterior Paint Seal Gasket Set; except Sport Models

Reproduction of the original style exterior paint gaskets designed for use with 1974-76 Dodge Dart models. This comprehensive kit is designed to replace all the most important gaskets on the exterior of the vehicle. Perfect...


Product#: MN1801

1970-76 Dart, Demon, Duster, Valiant; Body Plug Set; 22 Piece Set

Reproduction of the original style body plugs designed for use with 1970-76 Dodge Dart, Demon, Duster, and Valiant models. When doing a full restoration it is a good idea to replace all of body plugs under your vehicle....


Product#: A9712B

NotcHead Firewall Ring for 1/2" Heater Hose or AC #6 - Black Anodized Finish

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...


Product#: A9758P

NotcHead Firewall Ring for 5/8" Heater Hose or AC #8 - Polished Finish

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...


Product#: TF400507

1947-59 Chevy Truck, 1955-57 Bel Air, Tri-Five; Firewall Grommet; 4-Hole; Small

Reproduction of the original small 4-hole firewall wire harness grommet for use with all 1950-59 Chevrolet, GMC trucks, and 1955-57 Chevy Bel Air, 150, 210, Nomad models. Manufactured to EPDM rubber to factory specifications....