Product#: *RL5

5 Leaf Rear Leaf Springs (Spring Rate 143 Lbs) - Replacement Style

Replace the sagging leaf springs on your classic GM vehicle with this quality set produced by OER! These replacement rear leaf springs are designed to replace the original multi-leaf spring set while featuring a precise...


1970-81 Camaro, Firebird; Tubular Control Arm Set, Lower
NEW

Product#: 154076

1970-81 Camaro, Firebird; Tubular Control Arm Set, Lower

Enhance the handling performance of your 1970-81 Camaro or Firebird with these quality tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension...


Product#: RL7

3-1/4" Wide X 6-3/4" Long Leaf Spring U-Bolts

Reproduction OE-style U-bolts and nuts for rear leaf springs from OER®. 2 pair required per axle. Comes with heat treated grade 8 nuts and F436 heat treated and hardened heavey duty washers. {specs} Applications: ...


Product#: FSB907

1964-81 GM Models; 1970-81 Camaro, Firebird, 1975-81 Nova; Front Sway Bar Set; 1 1/4" Bar; with Hardware

Front sway bar for various 1964-81 Buick, Chevrolet, Pontiac, and Oldsmobile models with a 1-1/8" diameter bar. This sway bar is designed to minimize body roll, under-steer and over-steer when cornering, resulting in...


Product#: FSB908

1964-81 Buick, Chevy, Pontiac, Olds, Front Sway Bar Set; 1-1/8" Bar; with Hardware; Various GM Body Models

Front sway bar for various 1964-81 Buick, Chevrolet, Pontiac, and Oldsmobile models with a 1-1/8" diameter bar. This sway bar fits a wide variety of models including Buick Skylark, Special, Chevrolet Chevelle El Camino,...


Product#: 499473

1970-81 Rear Spring Shackle Bushing ; Camaro, Firebird, Nova, X-Body

Replace your cracked or worn out original rear spring shackle bushings and bring your rear suspension back to original factory ride specifications. Each bushing is designed and manufactured to replicate the original in...


Product#: K550

1970-81 Camaro, Firebird, 1962-79 Chevy II, Nova and X-Body; Rear Spring Shackle Bushing Set

Reproduction of the original rear spring shackle kit designed for use on various GM models. Each shackle kit replaces the old or worn out original hardware and bushings with this quality reproduction. Includes all of the...


Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade
NEW

Product#: 154632

Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade

Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...


Product#: 14927

Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each

Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...


Product#: 10268

1970-2005 GM Cars, Trucks; Upper Ball Joint with Hardware; Various Models

Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...


Product#: RL6

Rear Shock Extension Fine Thread

Extends shock 2" allowing shocks to reach the shock mount on body. (For use on mono to multi-leaf conversions). 1 pair required


Product#: 12297

1971-2005 GM; Lower Control Arm Bushing; Passenger Car and Truck; Varius Models; Each

Reproduction control arm bushing for the lower control arm on various 1971-05 GM and various other models. Manufactured in steel clad rubber to be pressed into place. If your suspension rattles or makes noises when turning...


Product#: 748600

1968-69 Camaro, Firebird, 1968-79 Nova, X Body; Lower Rear Shock Mount Bolt; Each

Reproduction of the lower rear shock mounting bolt for 1968-69 Camaro, Firebird, and 1968-79 Nova, 1971-77 Ventura, 1973-80 Omega, 1973-75 Apollo, 1975-80 Skylark models with multi-leaf springs. This essential bolt was...


Product#: *R654

1970-81 Camaro / Firebird Rear Leaf Spring Pad Set

Each pad is used to insulate the area between the spring and the mounting plate. Two upper pads and two lower pads are required on vehicles with leaf springs.


Product#: 332671

1968-81 Rear Sway Bar/Anchor Plate Bolt - 7/16"-20 X 1-5/16"

Bolt and nut used to attach the rear sway bar bracket to the lower anchor plate and leaf spring perch. This case hardened bolt measures 7/16"-20 x 1-5/16" and is designed for models equipped with standard suspension. 4 bolts...


Product#: 3982300

1970-81 Rear Sway Bar Bracket ; 1970-81 F-Body, 1970-79 X-Body ; Various Models

This OER® reproduction of the original rear sway bar bracket manufactured from high grade stamped steel to original specifications. Sway bar brackets hold the sway bar bushings to the frame and secures the rear sway bar...


Product#: A8500200

1962-87 Buick, Chevrolet Pontiac, Olds; Ball Joint Rivet Bolt Set; 24 Piece Set

This rivet-style bolt set attaches the ball joint to the upper control arm, providing the appearance of a real rivet. A serrated locking rivet head prevents spinning when the nut is tightened. Includes eight Grade 8 rivet...


1969-82 Rear Stabilizer Bar Link; Upper Bracket GM#485336
NEW

Product#: SU1111Z

1969-82 Rear Stabilizer Bar Link; Upper Bracket GM#485336

Reproduction rear stabilizer/swaybar bar link upper bracket for 1969-81 Chevrolet Camaro, Pontiac Firebird and 1969-1970 Chevrolet Nova models. This is the upper bracket that mounts the rear stabilizer/sway bar link to the...


1964-1981 Various GM Vehicles; Coil Spring; Spacer 3/8"
NEW

Product#: SU2461Z

1964-1981 Various GM Vehicles; Coil Spring; Spacer 3/8"

We now have reproduction of the coil spring spacer that goes between the front lower control arm and spring for 1964-81 GM Applications including Camaro, Firebird Cutlass and GTO models. It is perfect to lift the front end a...


Product#: 18203

1970-05 Buick, Chevrolet, Oldsmobile, Pontiac; Front Sway Bar End Link; LH or RH; 2 Required

Includes all the components to replace the original bushings and hardware. Each set includes 4 bushings, 1 bolt, 1 nut, 4 washers, and 1 spacer. Set does only 1 side. 2 required per vehicle.