1984 Oldsmobile All Models Parts

This HEI remote mount Super Coil is engineered with optimized low resistance, high turns ratio windings around a M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts,...

Reproduction of the original style floor pan plug designed for use on various 1978-88 Buick Regal and G-Body models. Each flooor pan plug is manufactured in stamped steel to original factory specifications featuring correct...

Reproduction of the original control arm dust shields designed for use with 1981-87 Regal, 1981-87 Monte Carlo, and 1981-87 Cutlass models. Die-cut from rubber to factory specifications with the correct holes for proper fit....

The Fisher Body Manual has the complete information on the essential removal, installation and adjustment procedures for servicing your vehicle. This is a Fisher Body Shop Manual that covers the B,D,E,G & K bodies for this...

Genuine GM replacement receiver/dryer assembly which is used when servicing or re-installing air conditioning.

This lower steering shaft and Bearing will fit the 1984-1987 Turbo Regal (all 1979-1988 G-Body models and 1982-1992 Camaro and Firebird models) lower steering shaft. The original lower steering shaft uses a flexible joint...

Reproduction of the original turn signal stalk (with pulse wipers) and cruise control switch designed for various 1984-90 Buick, Chevrolet. GMC, Pontiac and Oldsmobile models. This turn signal switch is used on vehicles...

A bad fuel pump relay can be the cause of a hard starting problem. If you turn the key into the on position, you should hear the fuel pump "whirr" for a few moments as it pressurizes the system. If not, (and the pump is good)...

Our direct replacement electric fuel pump features cutting-edge turbine technology, which makes it quiter, more tolerant of debris, and more efficient. It also exceed manufacturer’s tolerances for the ethanol found in today’s...

Reproduction of the original turn signal stalk lever and cruise control switch for models equipped with pulse wipers. Each combination switch comes chrome plated, as original. Fits a wide variety of GM models as listed below....

Replace the inoperative ignition switch in your GM vehicle (including your Camaro, Firebird or GM Truck) with this OER® Authorized reproduction. Each switch is produced with a stamped steel bracket and injection-molded plastic connector that gets mounted to the steering column as original. Features 9 blade-style terminals. Replaces GM OE part # 7843451 or Delco D1408B. Buick Applications: 1984-89 Century with Tilt Wheel 1987 LeSabre with Console Shift and Tilt Wheel 1984-89 Skyhawk with Tilt Wheel 1986-87 Somerset with AT and Tilt Wheel 1985 Somerset Regal Limited V6 with AT and Tilt Wheel Cadillac Applications: 1985-88 Cimarron d'Oro with AT and Tilt Wheel 1984 Deville With Console and Tilt Wheel 1984-85 Fleetwood With Console and Tilt Wheel Chevrolet Applications: 1986 Astro Van With Console and Tilt Wheel 1984-86 Camaro with Automatic Console Shift and Tilt Wheel 1988-89 Camaro with Tilt Wheel and Pulse Wipers 1991 Camaro with Automatic Console Shift and Tilt Wheel 1992 Camaro 4 Speed Auto Trans (MD8) 1984-90 Cavalier with AT and Tilt Wheel 1984-86 Celebrity with Console and Tilt Wheel 1988 Celebrity with Tilt Wheel 1984-85 Citation with AT and Tilt Wheel 1984-86 C/K Series Pickup with Automatic Console Shift and Tilt Wheel 1984-86 K5 Blazer with Console Shift and Tilt Wheel 1984-86 Suburban with Automatic Console Shift and Tilt Wheel 1984-85 G Series Van with Automatic Console Shift and Tilt Wheel 1984-87 Impala/Caprice/Full Size with Console and Tilt Wheel 1984-85 S Series Pickup with Console Shift and Tilt Wheel 1984-86 S Series Blazer with Console Shift and Tilt Wheel 1993 S Series Pickup with Console Shift and Tilt Wheel GMC Applications: 1985 C/K 1, 2, 3 with Automatic Console Shift and Tilt Wheel 1984-85 G Series Van with Automatic Console Shift and Tilt Wheel 1984-86 S Series Pickup with Console Shift and Tilt Wheel 1984-86 S Series Jimmy with Console Shift and Tilt Wheel 1993 Sonoma Pickup with Console Shift and Tilt Wheel 1986 Safari Van With Console Shift and Tilt Wheel 1991 Syclone With Console Shift and Tilt Wheel 1992-93 Typhoon With Console Shift and Tilt Wheel Oldsmobile Applications: 1984-85 Ninety-Eight with Console Shift and Tilt Wheel 1985-87 Calais with Console Shift and Tilt Wheel 1984-90 Cutlass Ciera with Console Shift and Tilt Wheel 1986 Delta 88 with Console Shift and Tilt Wheel 1984-88 Firenza with Console Shift and Tilt Wheel 1984 Omega with Console Shift and Tilt Wheel 1984-85 Toronado with Console Shift and Tilt Wheel Pontiac Applications: 1984-90 6000 with Console Shift and Tilt Wheel 1984 Acadian with Console Shift and Tilt Wheel 1984-90 Bonneville with Console Shift and Tilt Wheel 1984-88 Fiero with Console Shift and Tilt Wheel 1984-90 Firebird with Automatic Console Shift and Tilt Wheel 1991-92 Firebird 4 Speed Auto Trans (MD8) 1985-91 Grand Am with Console Shift and Tilt Wheel 1984 Grand Prix with Console Shift and Tilt Wheel 1985 J2000/Sunbird with Console Shift and Tilt Wheel 1986-94 Sunbird with Console Shift and Tilt Wheel 1984 Phoenix with Console Shift and Tilt Wheel 1988-89 Safari with Console Shift and Tilt Wheel 1987 T1000 with Console Shift and Tilt Wheel The OER® Authorized logo represents products that meet or exceed stringent OER® quality control standards. This item has been sanctioned and approved by OER®.

Reproduction of the original arm rest pads designed for use with various 1978-87 Buick Regal and GM G-Body models. Manufactured to factory specifications featuring the correct grain for a proper appearance. Includes RH and LH...

Replace the dirty of clogged fuel filter on your vehicle with a service replacement. {fitment}

Transmission Extension Bushing: Classic Industries offers this complete listing of the original factory 4/speed Muncie transmission as shown in the diagram. Although many of the parts are currently not available, we list them...

OER® reproduction of the original T-Top handles designed for use on various 1978-85 GM vehicles. Manufactured in quality die-cast zinc featuring a bright polished chrome finish. T-Top handles are used to secure and release...

Reproduction of the original style die-cut under carpet sound deadener designed for use with 1978-87 Buick Regal and GM G-Body models. Each set of carpet underlay is manufactured to fit your floor pan precisely to help reduce...

Replace your original engine crankcase breather cap. Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to...

Our direct replacement electric fuel pump features cutting-edge turbine technology, which makes it quiter, more tolerant of debris, and more efficient. It also exceed manufacturer’s tolerances for the ethanol found in today’s fuel blends. Buy with confidence, this fuel pump is backed by a manufacturer’s 12 month/12,000 mile warranty for defects in material and workmanship, under normal use and service. Camaro Applications: 1982-83 151/2.5-F 1984 305/ 5.0-G with electric pump Firebird Applications: 1982-83 151/2.5-F 1984 305/5.0-G,H with electric pump

This GM Differential Clutch Disc Repair Kit is a genuine GM replacement part. The corresponding GM part number is 231127. The repair kit is for a GM 8.5-inch, 10-bolt positraction differential with 28 splines. It is comprised...

Replacement screened oil pump pickup protects the oil pump gears against damage from metal fragments which may have found there way into the oil pan.{fitment}

Retro Sound stock replacement speakers are just what you are looking for to finish your sound system. These speakers have an acoustically transparent cone to protect the drivers and cone from elements. They have a 3-way...

Reproduction battery hold down bracket for 1985-87 Buick Regal and 1981-88 Oldsmobile Cutlass models. Manufactured to factory specifications for an original fit and function. {fitment}S

Reproduction acorn lug nuts for various Buick, Chevrolet, Oldsmobile, and Pontiac applicatios. Each nut is reproduced with higher quality than the original, featuring a stamping of the letter "M" on the top of the lug nut....

Reproduction of the original style bucket seat hinge covers designed for use with various 1982-92 GM models with AR9 bucket seat option. Each cover is manufactured to factory specifications featuring the correct grained...

Reproduction of the original style bucket seat hinge covers designed for use with various 1982-92 GM models with AR9 bucket seat option. Each cover is manufactured to factory specifications featuring the correct grained...

Reproduction of the original style bucket seat hinge covers designed for use with various 1982-92 GM models with AR9 bucket seat option. Each cover is manufactured to factory specifications featuring the correct grained...

Aftermarket replacement neutral safety switch for 1982-2002 Camaro and Firebird and various other GM models with automatic transmission. A neutral safety switch allows current to pass from the ignition switch to the starter...

Reproduction heater blower motor resistor for various GM air conditioned models. Each resistor is an exact reproduction of the original GM component designed to fit and function same as the original AC Delco resistor. The...

Want to unlock more power from your engine and actually burn less gas? Through an intensive R&D process, E3 has created a spectacular new spark plug that creates the industry’s fastest spark growth and fastest combustion...

Transmission Pump Seal: Classic Industries offers this complete listing of TH400 transmission internal components. Although some of the parts are currently not available, we list them all for your reference. The listings...

Replace the inoperative power door lock switch and enjoy the convenience of power door locks once again. This reproduction power door lock switch is just what you need to get your factory door lock working again. Fits left...

OER® reproduction of the original lower control arm rubber bumper designed for use on many GM models including the vehicles listed below. Each control arm bumper is anufactured from durable rubber with the correct...

Original plug designed to fill the regulator hole. Plug is designed for all 1970-81 6 cyl Firebirds.

Stamped steel reproduction of the original retainer that mounts directly into the door panel and surrounds the 2 button switch. This power window switch retainer is manufactured to replicate the original is appearance and...

OER® Authorized reproduction hood latch assembly for various GM models as listed below. Each latch is designed as a direct replacement for your worn or inoperative original. Buick Applications: 1982-1984 Buick Electra...

Reproduction front window glass molding installation clip for a wide variety of GM models with nylon clips. Each clip is designed and manufactured to replicate the OE style clips providing a snug fit for the molding. This...

Replace your original speedometer cable with these Genuine ACDelco replacements. Originality in all aspects of your restoration is important. Why replace your original cables with aftermarket generic cables that may or may...

Reproduction of the wire harness/pigtail used with heater blower motor resistor part number 1571968. Includes correct wiring and pigtail replicating the original. For reproduction or original blower motor resistors. ...

This is an original GM turn signal lever for a variety of GM models including 1987-89 Camaro models without pulse wipers. Features a black stalk and black knob. Buick Applications: 1982-1987 Buick Century 1982-1987 Buick...

Transmission Pump Body Bushing: Classic Industries offers this complete listing of TH400 transmission internal components. Although some of the parts are currently not available, we list them all for your reference. The...

Prevent premature bearing failure! Replace aging, cracked or deteriorated wheel seals to keep wheel bearing grease where it belongs... lubricating your wheel bearings! Always check the seal whenever removing the brake drum or...

Reproduction of the original speedometer cable designed for use with various 1964-1990 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. This reproduction speedometer cable is manufactured to original GM...

Correct valve cover and crankcase molded rubber grommets which insert into the valve cover where the PCV or air cleaner to valve cover elbow is inserted. Each grommet is manufactyred to exact specifications and will fit most...

Reproduction of the original style power window switch for a wide variety of 1982-96 Buick, Chevrolet, GMC, Oldsmobile and Pontiac models. Each switch is manufactured to factory specifications and comes with a chrome plated...

Original GM power steering pump cap designed for use with a variety of Buick, Chevrolet, Cadillac, Pontiac, and Oldsmobile models as listed. Replace your damaged or missing power steering reservoir cap with an original GM...

OER reproduction Anco-style windshield wiper blade insert for various classic American vehicle models from the 1960's and up. These 16" wiper blades are manufactured from quality molded rubber as original. Refill is...

FOR KITS ONLY. NOT SOLD SEPARATELY.

Genuine ACDelco blower motor for various GM applications. Manufactured to meet GM quality control standards to ensure long life and quality performance. Replaces OE #'s 52498869, or Delco 15-8531. Vented style with 11/16"...

Authentic reproduction of the stainless steel ANCO Rain-Master (original ANCO part # 816) "Aero" Anti Wind-Lift Wiper Blades designed to fit 1/4" (7mm) wide bayonet style wiper arms. Popularized in the 1960's and 70's to...

K&N's replacement air filter is designed to increase horsepower and acceleration while providing excellent filtration. This filter is washable and reusable and is design to fit into the OE air cleaner assembly. Features:...

This is a metric oil pan drain plug (m12x1.75x26.5), for Chevrolet, Chevrolet trucks, Buick, Oldsmobile trucks, Pontiac, Oldsmobile, Cadillac and GMC trucks. It's a genuine General Motors part with an OEM part number of...

Reproduction front window glass molding installation clip set for a wide variety of GM models with nylon clips. Each clip set is designed and manufactured to replicate the OE style clips providing a snug fit for the molding....

This is a windshield wiper retainer clip that includes the pinion and the clip. It's a genuine General Motors replacement part. The corresponding GM part number is 12367837. The component is comprised of plastic. It weighs...

This 1971-2015 GM/GMC Ring Gear To Case Bolt is a genuine Gm replacment part. The corresponding GM part number is 11610549. It is comprised of steel and is left hand thread. The bolt has a wide range of GM/GMC applications....

Retainer Snap Ring: Classic Industries offers this complete listing of TH400 transmission internal components. Although some of the parts are currently not available, we list them all for your reference. The listings and...