1988 Ford F-150 Parts - Cooling System

This timed cooling system shutdown system from Ron Francis Wiring has adjustable relays that keep power to the cooling fan and electric water pump (if equipped) when the key is shut off. This reduces the block temperature as...

Zinc Anode is found in heavy duty applications to protect cooling systems from galvanic corrosion due to electrolysis or coolant additive failure/breakdown. This simple component allows the electrolysis process to "eat" the...

Champion Cooling 10" Electric Cooling Fan w/Mounting Kit

This cooling fan shutdown set from Ron Francis Wiring shuts down your electric cooling fan above 50-60 MPH to improve engine cooling by preventing the electric fan from fighting airflow through the radiator at highway speeds....

Reproduction of the original radiator support designed for use with 1987-91 Ford F-Series pickup trucks, and Bronco models. Each radiator support is manufactured in stamped steel to original factory specifications featuring...

Edelbrock Victor Series water pumps provide maximum cooling for the street and the race track. They’re ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using...

Edelbrock Victor Series water pumps provide maximum cooling for the street and the race track. They’re ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using...

Edelbrock Victor Series water pumps provide maximum cooling for the street and the race track. They’re ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using...

All new replacement cast iron water pump for various 1987-97 Ford F-Series Truck and Bronco models with 5.0L or 5.8L V8 engines. This pump features all new, original equipment-quality components for proper fit and a long...

Reduced engine temperatures provide a denser air/fuel mixture which helps produce more horsepower. Consistent control of engine temperature allows the engine to operate at its peak efficiency no matter what the driving...

Keep your Ford Pickup Truck cool without spending a small fortune on a radiator! Each Champion high performance aluminum radiator is specifically designed for each application and features a billet aluminum filler neck, 100%...

Keep your Ford Pickup Truck cool without spending a small fortune on a radiator! Each Champion high performance aluminum radiator is specifically designed for each application and features a billet aluminum filler neck, 100%...

Reproduction fan shroud for 1973-79 F-Series Truck and Bronco models with 351M and 400 cid V8s. Each fan shroud is manufactured to OE specifications and fits the stock radiator. Make sure your cooling system is delivering by...

1980-96 Ford Trucks and Bronco Fan Shroud bolts and U - nuts. Replaces part# E0TZ-8146-BK Applications: 1981-86 Ford Truck (F150/F250/F350) 1981-86 Ford Bronco

Replacement thermostat housing gasket for various 1966-01 Ford and Mercury models including Mustang, Cougar, Bronco, and F-Series Truck. This direct fit replacement gasket is constructed of a cellulose/nitrile composition to...

This electric engine water pump fits Small Block Ford engines and is made from high-quality die cast aluminum. Features a great looking blue powder coat finish. Unit has a flow rate of 35 GPM and only draws 6 amps. It...

Based on the popular Chevy versions the new Ford small-block electric water pump features a durable 12-volt motor pumping up to 35+ gallons of water per minute. Each pump is made from durable but light-weight die-cast...

This electric engine water pump fits Small Block Ford engines and is made from high-quality die cast aluminum. Features a great looking black powder coat finish. Unit has a flow rate of 35 GPM and only draws 6 amps. It...

Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components to stand up to even the most demanding automotive cooling systems. This is a standard cap that...

This electric water pump drive set was designed to alleviate the power drag produced by conventional pulley drive units. An electric motor, turning at approximately 1,500 rpm, is more than adequate to fulfill cooling needs...

Champion Cooling Systems DP-1.25 Dual Pass Radiator Hose Fitting

Champion Cooling Systems DP-1.50 Dual Pass Radiator Hose Fitting

An electric fan can be a fast and easy way to improve the performance of your vehicle. Thermostatically controlled, it only operates when forced airflow is required (such as when idling, during stop and go traffic, pulling a...

Thermostatically controlled, it only operates when forced airfl ow is required (such as when idling, during stop and go traffic, pulling a load, driving up a grade, etc.). Can be mounted either in front or in back of the...

An electric fan can be a fast and easy way to improve the performance of your vehicle. Thermostatically controlled, it only operates when forced airflow is required (such as when idling, during stop and go traffic, pulling a...

This Ice Box™ Cooling Fan Control setup from Ron Francis Wiring is a dual fan control can operate two fans at different temperatures or a single two speed fan at different temperatures. Adjustable operating range of...

Impurities in well water can cause rust and corrosion inside the radiator, water pump, and cylinder heads. Over time, this can lead to a loss of cooling efficiency. Joe Gibbs Driven Coolant System Protector stops the adverse...

Correct style water bypass hose clamp with OE style side screw used on various GM vehicles. Most commonly used on 1965-72 vehicles on water pump bypass hoses. {fitment} Correct hardware can make any installation job...

This rubber hose reducer is designed for custom applications to allow the use of a larger ID radiator hose with smaller inlets and outlets on radiators, water pumps, and thermostat housings. Simply insert them into the hose...

Reproduction of the original 1959-1972 WITTEK MFG tower style upper radiator hose clamp. This clamp is reproduced to exact factory specifications and include correct style clamp with attaching screw. Measures 2-1/4". This...

Correct Corbin style lower radiator hose pinch clamp designed for use with various 1955-59 Chevrolet model as listed. Each clamp is manufactured to correct factory specifications. Sold individually. Correct hardware can make...

Reproduction of the original 1966-1982 WITTEK MFG tower style hose clamp designed for use on various 1966-1982 GM models. Each clamp is designed to replace the original and offers an OE appearance. Correct for most...

Reproduction of the original 1959-1972 WITTEK MFG tower style lower radiator hose clamp. This clamp is reproduced to exact factory specifications and include correct style clamp with attaching screw. Measures 2-5/16". This...

The NotcHead fastening system will keep your braidedl lines secure and look great while doing it! Once fastened down with the included hardware, your lines will snap in and out of these clamps for a clean and simple...

Reproduction of the original 1959-1972 WITTEK MFG tower style upper radiator hose clamp. This clamp is reproduced to exact factory specifications and include correct style clamp with attaching screw. Measures 2-1/16". This...

This rubber hose reducer is designed for custom applications to allow the use of a larger ID radiator hose with smaller inlets and outlets on radiators, water pumps, and thermostat housings. Simply insert them into the hose...

Shroud will fit small block and big block radiators. Simply remove your original fan shroud and replace it with this shroud. All mounting hardware is included for installation. Will replace all plastic and OEM shrouds. GM...

Alter Ego 1063 Series insulated billet aluminum panel mount line clamps with Delrin inserts. These clamps are great for cleaning up your engine bay. Safe for use with most hard and soft fluid and air lines. Perfect for custom...

Alter Ego 1063 Series insulated billet aluminum panel mount line clamps with Delrin inserts. These clamps are great for cleaning up your engine bay. Safe for use with most hard and soft fluid and air lines. Perfect for custom...

Alter Ego 1063 Series insulated billet aluminum panel mount line clamps with Delrin inserts. These clamps are great for cleaning up your engine bay. Safe for use with most hard and soft fluid and air lines. Perfect for custom...

Alter Ego 1063 Series insulated billet aluminum panel mount line clamps with Delrin inserts. These clamps are great for cleaning up your engine bay. Safe for use with most hard and soft fluid and air lines. Perfect for custom...

Once installed in the upper radiator hose, this full - flow reusable filter captures debris before it can clog the radiator and heater core. Manufactured from high quality brass. Aircraft style hose clamps and instructions...

Once installed in the upper radiator hose, this full - flow reusable filter captures debris before it can clog the radiator and heater core. Manufactured from high temperature clear polycarbonate (for easy viewing). Aircraft...

Once installed in the upper radiator hose, this full - flow reusable filter captures debris before it can clog the radiator and heater core. Manufactured from high quality brass. Aircraft style hose clamps and instructions...

Reproduction of the original 1966-1982 WITTEK MFG tower style hose clamp designed for use on various 1966-1982 GM models. Each clamp is designed to replace the original and offers an OE appearance. Correct for most...

If you're doing an engine swap, this flexible radiator hose manufactured by Goodyear may be just what you need to complete the cooling system installation. The hose features a unique design that allows it to conform to a...

This set is designed to allow a wide range of temperature adjustments for your electric fan. A bulb at the top of the capillary tube is designed to probe or be attached to the top or hottest portion of the radiator. ...

Use these universal billet aluminum brackets to mount your 14" or 16" Champion or Challenger Series fan. Set features four adjustable side angle brackets that attach to the side flange of the radiator. Hardware included.

SPAL electric fans are manufactured for the most demanding cooling systems. Fans feature slide-in mounting flanges, and fully sealed waterproof/dustproof electrical motors that is fully tested and individually balanced during...

Replacement style stainless steel side screw hose clamps used on various GM vehicles. Top quality clamp with extra-strength construction. Durable 200 series stainless steel 1/2" band and screw housing. One-piece screw housing...

This reversible fan will help prevent overheating in stop-and-go traffic. Designed to fit most cars or trucks, it will increases gas mileage, improve engine performance and will free up the water pump pulley for more RPM....

This reversible fan helps prevent overheating in stop-and-go traffic, designed to fit the most popular cars and trucks, increases gas mileage, improves engine performance, frees the water pump pulley for more RPM, installs in...

If you're doing an engine swap, this flexible radiator hose manufactured by Goodyear may be just what you need to complete the cooling system installation. The hose features a unique design that allows it to conform to a...

Up to 30°F cooler over just coolant alone, the universal Liquid Chill additive is available in 4oz bottles.

Try this new technologically advanced heat sensitive thermoplastic clamp that seals better in all conditions and temperature extremes. Easy to install with an ordinary heat gun. Specifications: Minimum inside diameter: 1/2"...

This aluminum bladed flex fan is rated up to 8,000 RPM and has chrome plated steel hub and features a narrow blade design for good airflow in tight space applications. Embossed center hubs and four rivet blade attachment...

Build your own custom coolant tubing system or add onto a basic set with this black silicone hose. Individual coolant tubes are available in Aluminized Steel (sold separately).

This universal fan spacer is constructed from quality aluminum and features a clear anodized finish. Fits most domestic 5/8" pilot water pumps. Includes mounting hardware. Specifications: Male pilot diameter: 5/8" Female...

SPAL electric fans are manufactured for the most demanding cooling systems. Fans feature slide-in mounting flanges, and fully sealed waterproof/dustproof electrical motors that is fully tested and individually balanced during...

SPAL electric fans are manufactured for the most demanding cooling systems. Fans feature slide-in mounting flanges, and fully sealed waterproof/dustproof electrical motors that is fully tested and individually balanced during...