Product#: MN2103

Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set

Reproduction of the original wheel opening molding screws designed to install wheel opening moldings on most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32"...

Product#: *881236

{year} {make} {model} Rivet Head Bolt with Nut; Set of 25; Black

Grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and bolt when installing the grill...

Product#: A13026

Molding Screw; Phillips; 8-18 x 3/4"; 31/64" Diameter Washer Head; Phosphate

Product#: 748841

1960-67 Chevrolet; 1963-66 Buick; 1961-66 Oldsmobile; Quarter Panel/Trunk Molding Capped Retaining Nut

Original style capped stud and clip nut designed to protect the owner from accidently cutting hands when reaching into areas like the trunk where the rear panel and quarter molding clips could cause harm. Most commonly used...

Product#: 3079

Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Zinc

This phillips head tapping screw is zinc plated steel to prevent corrosion and has a pan head. It's a size #8 x 1". Screw Size : #8 Length : 1" Head Style : Phillips pan Point Type : A/AB Finish : Zinc ...

Product#: 748699

1959-68 Chevrolet; Grill Attaching Rivet with Nut; Silver Zinc Plating

Reproduction of the original style grill rivet and nut designed for use with various 1959-68 GM applications where a rivet was originally required to install the grill. Each rivet is designed to offer an authentic appearance...

Product#: *881235

1959-1967 Grill Installation Rivet Head Bolt with Nut; Set of 25; Silver ; Various Models

Reproduction of th eoriginal grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and...

Product#: 748707

1971-72 Charger Grill Flat Nut ; Push On Type, Round ; Fits 1/8" Stud Size ; Set of 36

Reproduction of the circlips/lock washer nuts for a 1/8" stud used to attach varios Mopar grills and other items. Each lock washer nut is replicated to exact factory specs. Manufactured to fit and function as original....

Product#: 24171

# 8-18 X 3/8 Phillips Head Sealing Screw; # 9 Head; For Wheel Opening Moldings and Window Reveal Molding Clip; With Bi-Wax Tip

Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...

Product#: 748598

Grill Attaching Rivet with Nut; Stainless Steel

Grill attaching rivet with nut for various applications where a rivet is needed. These have the look of a rivet with the ease of a bolt and nut. Stainless Steel. Sold as each (1 rivet/1 nut) #10-24 x 3/8" Rivet Head bolt...

Product#: A9407

Stainless Steel Trim Screw, #8 x 1-1/2"; #8 Phillips Oval Head

Product#: A1011

Vinyl Top Molding Clip, White Nylon

Correct style plastic stud mounted clips used on various GM vehicles. Replacement vinyl top molding clips for various GM vehicles from 1967-1974. Correct hardware can make any installation job easier. Replace your...

Product#: 881429

1955-67 Grill Installation Rivet Head Bolt with Nut; set of 25; Stainless Steel; Various Models

Reproduction of the original grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and...

Product#: TF400284

Grill Rivet Bolt and Nut Set ; Black ; 7 Piece Rivet Set with Nuts

Reproduction of the grill rivets designed for use with various Chevrolet models. These rivets were used to mount the grill assemblies on various GM models. Rivets and nuts are manufactured to replicate the appearance of the...

Product#: MA4745

Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide

This reproduction screw can be used to install the park lamp assemblies to the grill on 1971-72 Plymouth Duster/Twister 340 models with a "Sharktooth" grill. Can also be used on many other models and applications where a #8...

Product#: A8448

Nylon Tail Molding Clip; 1" Long, White Nylon; Requires #8 Tapping Screw

Product#: A9477

Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw

Product#: 11501047

1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated

OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...

Product#: 4492963

Molding Clip Stud Screw; #4 x 3/8" with 1/8" Shoulder; Zinc Plated

Replacement mounting screw for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be missing....

Product#: *A2754K

1960-72 Chevrolet, GMC Truck; Wire Tail Molding Clip, #10-24, 4" Long, Zinc Plated, 10 Piece Set

Reproduction of the original style wire tail molding clip used on various 1960-72 Chevrolet and GMC trucks. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...