Product#: K4122

Windshield/Back Glass; Butyl Rubber Sealant Tape; 3/8" Diameter Round Ribbon; 15-Foot Roll

OER butyl rubber sealant for installing front windshield or back glass installation. Can be used on virtually all models of Chrysler, GM, and Ford that did not use a contoured molded style weatherstrip for installation of the...


Product#: *R1095

1970-1981 Camaro, Firebird; Roof Rail Weatherstrip Channel Screw Set; 36 Piece Set

Reproduction roof rail weatherstrip channel screw set for 1970-81 Camaro, Firebird, and other various GM models. These screws feature the correct style large head that is required for mounting coupe weatherstrip channels. #8...


Product#: *CR1065

1988-95; Chevy/GMC Truck/SUV; Beltline Weatherstrip; Door Windowfeltt; Antirattle Seal; Inner/Outer

Quality reproduction of the original door windowfelt set designed to replace both inner and outer weatherstrips on various 1988-95 C/K models as listed below. Moldings attach to the door with pre-applied clips on the RH and...


Product#: A1031

Nylon Fastener; 13/64" Dia. Stem; 13/32" Stem Length; For Door/Header Weatherstrip; Natural

This reproduction door weatherstrip clip is used on most GM vehicles which require plastic push in clips. These hook into holes in the door rubber weatherstripping and hold the weatherstrip to the door. Also used on Most GM...


Product#: 15667103

1988-00 Chevrolet, GMC C/K Truck, SUV; Tailgate Rubber Bumper

Reproduction tailgate rubber bumper for 1990-2000 Chevrolet and GMC trucks. Designed to keep the tailgate from rattling. Replacing the tailgate rubber stoppers will help ensure alignment of the tailgate and provide sound...


Product#: *R1094

1962-67 Chevy II/1967-69 Camaro, Firebird; Roof Rail Weatherstrip Channel Screw Set; 24 Piece Set

Replacement style self-tapping screws designed to attach the weatherstrip channels on 1962-67 Chevy II/Nova, 1967-69 Camaro. and 1967-69 Firebird coupe or convertible models. These screws feature the large head that is...


1992-1999 Suburban, 1995-2000 Tahoe/Yukon Tailgate Roof Drip Weatherstrip
NEW

Product#: 15983928

1992-1999 Suburban, 1995-2000 Tahoe/Yukon Tailgate Roof Drip Weatherstrip

Replacement weatherstrip designed for 1992-2000 Tahoe/Yukon and Suburban models. This weatherstrip seals the roof drip on upper edge of tailgate frame. Be sure to completely remove the old weatherstrip and clean the...


Product#: G10659

1988-00 GM Truck Door Weatherstrip LH or RH

Original GM weatherstrip for 1988-00 C/K model standard and extended cab pickups, and 1992-00 Tahoe/Yukon, Suburban and crew cab models. This weatherstrip attaches to the door frame section around the door opening to seal...


Product#: A9711B

NotcHead Firewall Ring Kit Machine Finish

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4?, Two 5/8? and one 1/2?...


Product#: G10658

1988-2000 GM Truck - Roof Rail Weatherstrip; LH or RH.

Original GM weatherstrip designed for 1988-2000 C/K model standard and extended cab pickups, and 1992-1999 Tahoe/Yukon 2 door models. This weatherstrip attaches to the door frame section along the windshield pillar and roof...


Product#: KG2041

1988-2002 GM/GMC Door Glass Weatherstrips - C/K 1,2,3 Only

Replacement 1988-2002 GM/GMC door glass weatherstrip for C/K 1,2,3. The corresponding GM part number is 15991405 and 15991406. The component is made of rubber to GM's exacting specifications.


Product#: 153905

1988-2000 Chevrolet, GMC C Series Pickup, Suburban, Tahoe; A Arm Splash Apron Dust Shields; 2 Wheel Drive

Reproduction of the original style A-Arm splash apron dust shields for use with various Chevrolet and GMC C-series pickup, Tahoe, and Suburban models. Replace your old splash aprons with this authentic style reproduction and...


Product#: 153906

1988-2000 Chevrolet, GMC K Series Pickup, Suburban, Tahoe; A Arm Splash Apron Dust Shields; 4 Wheel Drive; 7200 G.V.W.

Reproduction of the original style A-Arm splash apron dust shields for use with various Chevrolet and GMC K-series pickup, Tahoe, and Suburban models. Replace your old splash aprons with this authentic style reproduction and...


Product#: A9712B

NotcHead Firewall Ring for 1/2" Heater Hose or AC #6 - Black Anodized Finish

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...


Product#: A9758P

NotcHead Firewall Ring for 5/8" Heater Hose or AC #8 - Polished Finish

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...


Product#: TF400507

1947-59 Chevy Truck, 1955-57 Bel Air, Tri-Five; Firewall Grommet; 4-Hole; Small

Reproduction of the original small 4-hole firewall wire harness grommet for use with all 1950-59 Chevrolet, GMC trucks, and 1955-57 Chevy Bel Air, 150, 210, Nomad models. Manufactured to EPDM rubber to factory specifications....


Product#: 500187

Universal Grommet Fits 1-3/4" Hole with 7/16" Wire Opening

Sometimes you are forced to punch a hole in your firewall to get additional wires into the engine compartment, but that hole you cut is sharp and can potentially sever wires. To help prevent this, install this universal...


Product#: 500185

Universal Grommet Fits 1-1/4" Hole with 7/32" Wire Opening

Sometimes you are forced to punch a hole in your firewall to get additional wires into the engine compartment, but that hole you cut is sharp and can potentially sever wires. To help prevent this, install this universal...


Product#: G11357

Door Bumper

1982-2005 S/T10 TRUCKS 1988-91 C/K1,2,3 ONLY 1992-2007 C/K1,2,3 TRUCKS

Door Bumper

 
MSRP $10.99 ea
Classic $9.99 ea

Product#: 500179

Universal Grommet Fits 1/2" Hole with Single Wire Opening

Sometimes you are forced to punch a hole in your firewall to get additional wires into the engine compartment, but that hole you cut is sharp and can potentially sever wires. To help prevent this, install this universal...