2018 Cadillac All Models Lokar Performance Products

Lokar Duo-Pak throttle cable set will easily adapt to most gas pedals and throttle assemblies. Cable comes equipped with aluminum fittings and aluminum ferrules to eliminate fraying and feature a "U-Cut-to-Fit" outer housing...

This black stainless steel bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and in-line dual quads. Bracket is used to mount Lokar?s throttle cable and kickdown assemblies. Th is design provides improved...

Lokar Duo-Pak throttle cable sets will easily adapt to most gas pedals and throttle assemblies. Cable comes equipped with aluminum fittings and aluminum ferrules to eliminate fraying and feature a "U-Cut-to-Fit" outer housing...

Chromed steel brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Lokar tubular steel shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a machined billet steel mounting stud countersunk for the included socket head cap screws. Made in USA This lever is a direct...

Lokar's top quality speedometer cable features machined aluminum fittings and a premium housing with a specially extruded liner to extned the life of the cable. This 7' cut-to-fit speedometer cable is designed to work with...

Pedal floor spacers are recommended when installing the pedal on vehicles with thick carpet or under carpet padding. Made in USA

Lokar billet aluminum shifter lever for Tremec and Borg Warner T5, T45, and T56 transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This...

This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...

Kit comes with billet aluminum handle assembly and cables. The cables are u-cut-to-fit, designed with specially extruded liner for extended life of the cable, with billet aluminum fittings and stainless steel inner wire. ...

Lokar billet aluminum shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever is...

Lokar billet aluminum shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever is...

Lokars premium hood release set comes complete with a machined billet aluminum handle assembly and cable. The cable is cut-to-fit, designed with a specially extruded liner for extended life of the cable, aluminum fittings...

This Lokar foot operated park brake assembly gives you ease-of-operation and a clean, out-of-the-way appearance. Features: Dash-to-firewall adjustability Adaptable mouting location capability Heat-treated gears Hidden gears...

Lokar 10" replacement automatic transmission shifter stick kit. Kit includes lever, inner safety rod and adjuster nuts. This kit is intended to help the existing Lokar shifter customer who wants to change their lever for...

Chromed steel brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

This Lokar Hi-Tech "U-Cut-to-Fit" black polished stainless steel outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative...

Lokar tubular steel shifter lever for Tremec and Borg Warner T5, T45, and T56 transmissions. Feature a machined billet steel mounting stud countersunk for the included socket head cap screws. Made in USA This lever is a...

Lokar billet aluminum carburetor bracket and return spring kit for Edelbrock Carburetors. It attaches to both rear carb bolts to eliminate movement and ease the installation of Lokar?s throttle and kick down cables. Made in...

This Lokar Hi-Tech "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis cable ends to eliminate the...

This stainless steel bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and in-line dual quads. Bracket is used to mount Lokar?s throttle cable and kickdown assemblies. This design provides improved...

These stainless steel mounting brackets are designed to properly mount Lokar throttle and or kickdown cables on to today's most popular EFI intake systems. Lokar brackets are intended for use with Lokar cables only.

Lokar connector cable is designed to mount directly to the under-dash, foot operated brake and connect with Lokar universal rear brake cables. This cut-to-fit 6' long cable features a stainless steel housing. Made in USA

This Lokar Hi-Tech "U-Cut-to-Fit" polished stainless steel outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis...

Lokar tubular steel shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a machined billet steel mounting stud countersunk for the included socket head cap screws. Made in USA This lever is a direct...

Lokar Vintage Series universal throttle cables for carbureted applications. This cut-to-fit cable features vintage inspired braided cloth jackets covering Lokar?s specially extruded liners and stainless steel cabling. Made...

Lokar Vintage Series universal throttle cables for carbureted applications. This cut-to-fit cable features vintage inspired braided cloth jackets covering Lokar?s specially extruded liners and stainless steel cabling. Made...

Lokar billet aluminum shifter lever for Tremec and Borg Warner T5, T45, and T56 transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This...

This Lokar Hi-Tech "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis cable ends to eliminate the...

Lokar tubular steel shifter lever for Tremec and Borg Warner T5, T45, and T56 transmissions. Feature a machined billet steel mounting stud countersunk for the included socket head cap screws. Made in USA This lever is a...

Lokar direct fit pedal pads for use with Lokar?s drive-by-wire throttle control assembly. The standard model measures 4" x 1-1/2" and the XL model measures 5" x 2". Both sizes are available in brushed and black finishes to...

Brushed finish billet aluminum headlamp dimmer switch pad with rubber inserts. Made in USA Note: For use on vehicles with floor mounted dimmer switches only.

Lokar 8" replacement automatic transmission shifter stick kit. Kit includes lever, inner safety rod and adjuster nuts. This kit is intended to help the existing Lokar shifter customer who wants to change their lever for...

Lokar Duo-Pak throttle cable set will easily adapt to most gas pedals and throttle assemblies. Cable comes equipped with aluminum fittings and aluminum ferrules to eliminate fraying and feature a "U-Cut-to-Fit" outer housing...

Gleaming polish not your style? Then take a look at this stealthy black anodized billet aluminum brake pedal pad. Designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Lokar billet aluminum shifter lever for Tremec and Borg Warner T5, T45, and T56 transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This...

Lokar billet aluminum shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever is...

This floor mount shifter boot and retaining ring are the perfect match for Lokar?s floor mount shifter. Made in USA Inner ring dimensio ns measure 5-1/2" x 4". Outer ring dimensions are 6-3/4" x 5-1/4".

This Lokar Hi-Tech "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis cable ends to eliminate the...

Constructed of high quality aluminum and stainless steel, this adjustable hood prop offers great looks as well as functionality. When the hood is raised, the hood prop will automatically lock itself into position. A quick...

Gleaming polish not your style? Then take a look at this stealthy black anodized billet spring-loaded throttle assembly that features a removable lower arm and is splined for versatile mounting to either the right or left...

This Lokar foot operated park brake assembly gives you ease-of-operation and a clean, out-of-the-way appearance. Features: Dash-to-firewall adjustability Adaptable mouting location capability Heat-treated gears Hidden gears...

The Lokar Billet Aluminum Throttle/Kickdown Cable Mounting Bracket for Street Demon™ Carburetors is CNC machined from 6061-T6 billet aluminum. It provides easy installation of Lokar?s Throttle and Kickdown Cables. Made...

Gleaming polish not your style? Then take a look at this stealthy black anodized billet aluminum brake pedal pad. Designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Lokar billet aluminum shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever is...

Lokar direct fit pedal pads for use with Lokar?s drive-by-wire throttle control assembly. The standard model measures 4" x 1-1/2" and the XL model measures 5" x 2". Both sizes are available in brushed and black finishes to...

Pedal floor spacers are recommended when installing the pedal on vehicles with thick carpet or under carpet padding. Made in USA

This Lokar foot operated park brake assembly gives you ease-of-operation and a clean, out-of-the-way appearance. Features: Dash-to-firewall adjustability Adaptable mouting location capability Heat-treated gears Hidden gears...

Lokar direct fit pedal pads for use with Lokar?s drive-by-wire throttle control assembly. The standard model measures 4" x 1-1/2" and the XL model measures 5" x 2". Both sizes are available in brushed and black finishes to...

This Lokar Hi-Tech "U-Cut-to-Fit" polished stainless steel outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis...

Lokar billet aluminum shifter lever for Tremec and Borg Warner T5, T45, and T56 transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This...

This Lokar foot operated park brake assembly gives you ease-of-operation and a clean, out-of-the-way appearance. Features: Dash-to-firewall adjustability Adaptable mouting location capability Heat-treated gears Hidden gears...

Lokar billet aluminum shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever is...

This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...

Lokar's top quality speedometer cable features machined aluminum fittings and a premium housing with a specially extruded liner to extned the life of the cable. This 7' cut-to-fit speedometer cable is designed to work with...

Constructed of high quality aluminum and stainless steel, this adjustable hood prop offers great looks as well as functionality. When the hood is raised, the hood prop will automatically lock itself into position. A quick...

This Lokar foot operated park brake assembly gives you ease-of-operation and a clean, out-of-the-way appearance. Features: Dash-to-firewall adjustability Adaptable mouting location capability Heat-treated gears Hidden gears...

Lokars premium hood release set comes complete with a machined billet aluminum handle assembly and cable. The cable is cut-to-fit, designed with a specially extruded liner for extended life of the cable, aluminum fittings and...

Brushed billet aluminum brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Billet aluminum handle assembly for both the hood and trunk. The cables are "U-Cut-to-Fit", designed with specially extruded liner for extended life of the cable, with aluminum fittings and stainless steel inner wire. Hood release includes aluminum firewall fittings and cable stop. Outer housing is 18 inches inside the vehicle and 6 feet under the hood. Inner wire is 9 feet long. Trunk release includes cable stop. The outer housing is 15 feet long and the inner wire is 16 feet long. Made in USA Important: Requires cable-operated latches.