1967-91 AMC ; 343-401 cid V8; Edelbrock Performer RPM Cylinder Heads; w/o Crossover
NEW

Product#: E60119

1967-91 AMC ; 343-401 cid V8; Edelbrock Performer RPM Cylinder Heads; w/o Crossover

The Edelbrock #60119 Performer RPM cylinder head is designed as a bolt-on performance upgrade for any 1967-91 AMX, Javelin or Jeep with a 343, 360, 390 or 401 AMC V8 engine. They include adjustable rocker studs and guide...


Product#: E77790

Big Block Edelbrock Red Roller Rocker Arms- 7/16", 1.7 Ratio

Edelbrock red roller rockers are manufactured in the USA from lightweight 7129 grade aluminum. The body is CNC machined then micro polished and anodized for durability. The trunnion race, roller pin and roller tip are...


1967-78 AMC; 343-401 cid V8; Edelbrock Performer-Plus Hydraulic Flat Tappet Camshaft and Lifter Kit; 310 int./320 exh.
NEW

Product#: E7132

1967-78 AMC; 343-401 cid V8; Edelbrock Performer-Plus Hydraulic Flat Tappet Camshaft and Lifter Kit; 310 int./320 exh.

Edelbrock part #7132 Performer RPM Camshaft is designed for AMC 343-401 V-8 applications. This Edelbrock cam kit produced 433 HP & 489 ft-lbs. of torque when used with #7531 intake and #60119 cylinder heads on a 401 engine....


Product#: 67480-BCHW

Extruded Aluminum Roller-Rocker Arms. Amc V8, 1.6 Ratio, 3/8" Stud.

Rid your engine of internal friction with roller-tipped rocker arms. The race-proven full needle bearing, fulcrum and roller tip not only unleash horsepower, they also lengthen valve train component life and reduce wear and...


1966-91 AMC; 290-390 cid; Edelbrock One-Piece Pushrod Set; 5/16" OD x 8.050"
NEW

Product#: E9637

1966-91 AMC; 290-390 cid; Edelbrock One-Piece Pushrod Set; 5/16" OD x 8.050"

Edelbrock part #9637 Pushrods are designed for AMC 343-401 V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability....


Product#: 66409C

proform Big Block Push Rod Set 3/8" +.405 Tall Deck

Big Block Push Rod Sets: Heat treated one-piece pushrod sets for ˘Tall Deck÷ applications. Includes 16 pushrods in a clamshell package.


Product#: 66935

Proform 3/8"-24 Thread Poly Lock Set

Poly locks are designed for use specifically with full roller rockers featuring a set-screw locking device to ensure they remain secure. Sold as a set of 16.


Product#: 60116

1955-95 GM Small Block; Comp Cams Valve Lock Set

This hardened steel, single groove Steel Street Lock with 7° lock angle and 11/32" valve stem size is a perfect replacement lock for stock engine rebuilds. It is recommended only for street applications with lighter valve...


Product#: 12557390

3/8"-24 Rocker Arm Nut

Don't cheap out with inferior rocker arm nuts--use Melling! These rocker arm nuts from Melling are made from quality-grade steel for strength and durability. They're designed to keep your rocker arms positively locked for...


1967-91 AMC ; 343-401 cid V8; Edelbrock Performer RPM Cylinder Heads; w/ Crossover
NEW

Product#: E60139

1967-91 AMC ; 343-401 cid V8; Edelbrock Performer RPM Cylinder Heads; w/ Crossover

The Edelbrock #60139 Performer RPM cylinder head is designed as a bolt-on performance upgrade for any 1967-91 AMX, Javelin or Jeep with a 343, 360, 390 or 401 AMC V8 engine. They include adjustable rocker studs and guide...


Product#: E77770

Small Block Edelbrock Red Roller Rocker Arms- 1.5 Ratio For 3/8" Stud

Edelbrock red roller rockers are manufactured in the USA from lightweight 7129 grade aluminum. The body is CNC machined then micro polished and anodized for durability. The trunnion race, roller pin and roller tip are...


1967-91 AMC; 290-401 cid V8; Edelbrock Performer-Plus Hydraulic Flat Tappet Camshaft and Lifter Kit; 278 int./288 exh.
NEW

Product#: E2132

1967-91 AMC; 290-401 cid V8; Edelbrock Performer-Plus Hydraulic Flat Tappet Camshaft and Lifter Kit; 278 int./288 exh.

Edelbrock Performer-Plus Camshaft #2132 is designed for 290-401 AMC V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles...


Product#: E9648

Edelbrock Hardened Steel Pushrod Set for Chevy 348/409 W-Series - Set of 16

Edelbrock pushrods are designed for Chevrolet 348/409 ?W? series V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum...


Product#: 66950

Proform 3/8" Aluminum Stud Girdle Set

Aluminum stud girdles are designed to reduce flexing of the rocker arm studs and help reduce part breakage under high stress. Increased valve train rigidity helps minimize energy loss. For use on small blocks through 1986...


Product#: 66951

Proform 7/16" Aluminum Stud Girdle Set

Aluminum stud girdles are designed to reduce flexing of the rocker arm studs and help reduce part breakage under high stress. Increased valve train rigidity helps minimize energy loss. For use on small blocks with 7/16"...


Product#: 74016

1967-87 Pontiac 326-455CI V8 Valve Spring Retainer Set

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams® Steel Retainers are the perfect solution to this problem. COMP® engineers used 3D CAD with...


Product#: AR134711

Chevrolet Small Block ARP 3/8"-24 Rocker Arm Studs

ARP high performance rocker arm studs for Chevrolet Small Block engines are made of 8740 chrome moly forgings and heat-treated to 180,000 psi. Excellent for E.T Bracket Racing, limited rule oval track competition and...


Product#: 61116

Comp Cams Valve Lock Set; Super Locks; 10 Degree Angle; 11/32" Stem Size; 16 Qty

These Comp Cams 611-16 Steel Super Locks™ featuring a lash cap recess, 10° lock angle and 11/32" valve stem size are recommended for all race applications. Super Locks™ have a wider angle (10°) that...


Product#: 50316

Comp Cams Valve Stem Seal Set; For 11/32" Valves & .530" Guides

Comp Cams valve stem oil seals positive stop teflon. Guide .530 in. Valve size 11/32 in. - 16. Made in USA Sold as a set of 16.


Product#: 66936

Proform 7/16"-20 Thread Poly Lock Set

Poly locks are designed for use specifically with full roller rockers featuring a set-screw locking device to ensure they remain secure. Sold as a set of 16.