Product#: K521

1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models

OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...

Product#: UK915

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long

This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...

Product#: AL124

Accelerator Throttle Rod; Universal Fit

Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...

Product#: FT2200A

1982-85 Citation, Skylark, 1982-84 Omega, Phoenix; Zinc Plated Fuel Tank; GM10B

OER Authorized reproduction fuel tank for 1982-83 Chevrolet Citation, 1984-85 Citation II, 1982-85 Skylark, 1982-84 Omega, Phoenix models. Each tank is manufactured in quality stamped steel featuring a galvanized zinc coating...

Product#: GN110100A

1984-87 Buick Regal 3.8L V6; Fuel Tank; with Filler Neck; with Fuel Injection; 2 Door; Zinc Coated; 17 Gallon Capacity

Reproduction fuel tank for 1984-87 Buick Regal 2 door models equipped with a fuel injected 3.8L V6 engine. Manufactured to factory specifications, featuring original size, contours, filler neck, and come zinc coated for...

Product#: FT4023A

1977-90 Impala, Caprice, Buick, Oldsmobile, Pontiac, Wagon, 1978-87 El Camino, Caballero; Fuel Tank; Zinc; Without Filler Neck; 22 Gallon; Carbureted Gas or Diesel Powered

Reproduction fuel tank for carbureted gasoline powered or diesel powered 1977-1990 Impala, Caprice, Buick, Oldsmobile, and Pontiac station wagon, El Camino and Caballero models. This fuel tank is manufactured in zinc-coated...

Product#: 3931449

1957-69 Buick, 1968-70 Chevrolet; Vented Gas Cap; with Markings

Reproduction GM gas cap that includes the correct "S" rivet and properly engraved markings. Manufactured and designed from the original OEM cap, the quality and materials are manufactured to exact specification with the "show...

Product#: FT4015A

1980-90 Buick, Cadillac, Chevrolet, Pontiac, Oldsmobile Full Size Models; Fuel Tank; with Fuel Neck; 24 Gallon; Zinc Plated; Except Station Wagon; Various Models

Reproduction of the original style fuel tank designed for use with 1980-1990 Impala, Caprice, Buick, Oldsmobile, and Pontiac Full Size models as listed except station wagon. This fuel tank is manufactured in zinc-coated...

Product#: C67808

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps

Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...

Product#: CX5042

1965-97 GM; Fuel Tank Sending Unit; 0-90 Ohm; Universal Fit; For 6" to 24" Deep Fuel Tanks; Without Pick-Up Tube

Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...

Product#: 153665B

Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black

This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...

Product#: 153665A

1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit

This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...

Product#: 9047E

Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length

Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...

Product#: 9047G

Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length

Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....

Product#: TF700512

Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.

Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...

Product#: 14048

1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"

Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...

Product#: K915

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps

Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...

Product#: GN110098A

1978-87 Buick Regal; Fuel Tank; with Filler Neck; 2 Door; Zinc Coated; 17 Gallon; Except Station Wagon

Reproduction of the original fuel tank designed for use with 1978-87 Buick Regal 2 door models equipped with a carburated engine. Each fuel tank is manufactured in quality stamped steel to original factory specifications,...

Product#: FT4014A

1977-1990 Impala, Caprice, Buick, Oldsmobile, Pontiac, Wagon, 1978-87 El Camino, Caballero; Fuel Tank; Zinc Coated; with Filler Neck; 22 Gallon

Reproduction of the original style fuel tank designed for use with 1977-1990 Impala, Caprice, Buick, Oldsmobile, and Pontiac station wagon models. This fuel tank is manufactured in zinc-coated stamped steel to original...

Product#: 479312

1947-76 GM, Chrysler, Dodge, Plymouth; Brass Fuel Tank Sending Unit Float

Reproduction brass fuel sending unit float for various 1947-76 General Motors, and Chrysler, Dodge, Plymouth models. If your fuel gauge isn't reading correctly, it may be the fuel sending unit float. The original OE float may...