Buick Regal Parts - Body Panels

Reproduction of the original style long rear floor brace unit designed for use on various GM G-Body models. This support welds across the underside of the floor between the trunk floor and the short floor braces. Each rear...

Reproduction of the original complete floor pan designed for use with 1978-87 Buick Regal Chevrolet, Oldsmobile, and Pontiac G-body 2 door models. Each panel is manufactured in quality stamped steel to original factory...

Reproduction of the original windshield A-pillar designed for use with 1978-87 GM G-Body models with the t-top roof option. Each A-pillar is manufactured to correct factory specifications replicating the original design,...

AC heater box delete cowl panel for 1978-87 models. When installed this gives the cowl a finished and completed look, instead of a gap on the passenger side. The top cowl panel surface features high gloss black finish and...

Replacement header panel to radiator support brace for 1982-87 Regal models. This fiberglass brace is mounted between the rear edge of the header panel and the top of the radiator support. Provides a mounting point for the...

This delete panel is designed to eliminate both the heater box and air conditioning unit from the engine bay of your vehicle. Removal of the A/C unit and heater box instantly removes 30 pounds from the front of your vehicle...

Reproduction of the inner wheelhouse panel designed for use with 1981-87 Buick Regal models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...

Reproduction lower door patch panel for 1981-87 Regal models. Manufactured to factory specifications featuring correct contours.

Reproduction of the inner wheelhouse panel designed for use with 1981-87 Buick Regal models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...

Reproduction of the original T-top roof panel for use with 1982-88 Regal and G-Body models with T-Top roof. Manufactured in stamped steel to original factory specifications featuring original style contours for authenticity...

This delete panel is designed to eliminate both the heater box and air conditioning unit from the engine bay of your vehicle. Removal of the A/C unit and heater box instantly removes 30 pounds from the front of your vehicle...

Reproduction of the original complete inner and outer wheelhouse assembly designed for use with 1981-87 Buick Regal models. Each wheelhouse panel is manufactured in quality stamped steel to factory specifications replicating...

Reproduction of the original complete inner and outer wheelhouse assembly designed for use with 1981-87 Buick Regal models. Each wheelhouse panel is manufactured in quality stamped steel to factory specifications replicating...

Reproduction of the original inner rocker panel designed for use with various 1978-87 Buick, Chevrolet, Oldsmobile, and Pontiac G-Body models as listed. Each rocker panel is manufactured to factory specifications featuring...

Reproduction of the original inner rocker panel designed for use with various 1978-87 Buick, Chevrolet, Oldsmobile, and Pontiac G-Body models as listed. Each rocker panel is manufactured to factory specifications featuring...

Reproduction of the original B-Pillar T-Top Corner repair panel for 1978-88 Buick, Chevrolet, Oldsmobile, and Pontiac G-Body models. Each roof corner panel is manufactured in stamped steel to factory specifications for a...

Reproduction of the front lower quarter panel repair section for use on 1981-87 Regal 2 door models. Each panel is manufactured in stamped steel to factory specifications featuring original style contours that match the...

Reproduction of the rear lower quarter panel repair section for use on 1981-87 Regal 2 door models. Each panel is manufactured in stamped steel to factory specifications featuring original style contours that match the...

Reproduction of the rear lower quarter panel repair section for use on 1981-87 Regal 2 door models. Each panel is manufactured in stamped steel to factory specifications featuring original style contours that match the...

Reproduction of the front lower quarter panel repair section for use on 1981-87 Regal 2 door models. Each panel is manufactured in stamped steel to factory specifications featuring original style contours that match the...

Reproduction of the original B-Pillar T-Top Corner repair panel for 1978-88 Buick, Chevrolet, Oldsmobile, and Pontiac G-Body models. Each roof corner panel is manufactured in stamped steel to factory specifications for a...

Reproduction of the original T-top header panel and retainer for 1978-87 Regal, Type T, Limited, Grand National, and other GM G-Body models equipped with factory t-tops. Manufactured in a 1.0mm panel with LH and RH retainers...

Reproduction of the original outer wheelhouse panel designed for use with 1981-87 Buick Regal 2 door models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Reproduction of the original outer rocker panel designed for use with various 1978-87 Buick Regal, Grand National, and GM G-Body 2 door models. Manufactured in stamped steel to factory specifications featuring original style...

Reproduction of the original outer rocker panel designed for use with various 1978-87 Buick Regal, Grand National, and GM G-Body 2 door models. Manufactured in stamped steel to factory specifications featuring original style...

Reproduction of the original outer wheelhouse panel designed for use with 1981-87 Buick Regal 2 door models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Reproduction of the original style front floor pan repair panel for use with 1978-87 Regal and G-Body models. Manufactured for the purpose of repairing smaller sections of the floor pan without having to replace the complete...

Reproduction of the original style front floor pan repair panel for use with 1978-87 Regal and G-Body models. Manufactured for the purpose of repairing smaller sections of the floor pan without having to replace the complete...

Reproduction of the original header panel to radiator support brace for 1984-87 Regal models. Each fsupport brace is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...

Reproduction of the original style rear floor pan repair panel for use with 1978-87 Regal and G-Body models. Manufactured for the purpose of repairing smaller sections of the floor pan without having to replace the complete...

Reproduction SMC (OE Material) header panel for 1984-87 Buick Regal models without emblem including Grand National, GNX, and T-Type. Manufactured in SMC, featuring original style contours, and mounting points. This product is...

Reproduction of the original style rear floor pan repair panel for use with 1978-87 Regal and G-Body models. Manufactured for the purpose of repairing smaller sections of the floor pan without having to replace the complete...

Reproduction of the rear quarter panel wheel arch section for use on 1981-87 Regal 2 door models. Each panel is manufactured in stamped steel to factory specifications featuring original style contours that match the existing...

Reproduction of the rear quarter panel wheel arch section for use on 1981-87 Regal 2 door models. Each panel is manufactured in stamped steel to factory specifications featuring original style contours that match the...

Reproduction of the original inner 45/55 bench and bucket seat mounts designed for use with 1978-88 Buick Regal and GM G-Body models. The seat mounts are manufactured to original factory specifications. Will work when...

Reproduction of the rear bumper filler designed for use with 1984-87 Regal and Grand National models. Each rear bumper filler is manufactured from hand laid fiberglass with a single piece, no split design. Features the...

1978-87 Buick Regal AC delete cover. Retain a fully functional heater. Delete cover is ideal for removing the bulky evaporator box from your firewall while retaining the use of both your heater and defroster. No modifications...

Reproduction of the front bumper fillers designed for use with 1984-87 Regal and Grand National models. Each rear bumper filler is manufactured from hand laid fiberglass. Features the correct bezel groove for authenticity and...

Reproduction of the original outer 45/55 bench and bucket seat mounts designed for use with 1978-88 Buick Regal and GM G-Body models. The seat mounts are manufactured to original factory specifications. Will work when...

Made out of 100% Carbon Fiber, very light weight yet very strong! The fender braces triangulate the radiator core support to the fender. By resisting the bowing forces, core support bars are designed to oppose the weak link...

Reproduction hood to cowl seal for various 1978-88 G-Body models. This seal installs on the cowl panel, and seals up against the hood.{fitment}

Reproduction spare tire trunk wheel well for 1978-87 models. Located on the rear of the trunk floor and manufactured to factory specifications.

Reproduction trunk gutter for various 1978-88 G-Body models. This piece fits along the side edge of the trunk opening, and runs from the rear of the car up to the back glass. Come EDP coated for rust prevention. ...

Reproduction of the original outer seat mount bracket designed for use with various 1978-88 Buick, Regal, and GM G-Body models. Each bracket is manufactured in quality stamped steel replicating the original in design,...

Reproduction of the original front seat cross member designed for use with various 1978-88 Buick Regal and GM G-Body models as listed below. The seat mount cross member is manufactured in quality stamped steel replicating the...

Reproduction of the original lower A pillar repair panel for various 1978-88 G-Body models. Manufactured to factory specifications for proper fitment and appearance. Comes EDP coated for rust prevention. Fits LH-Driver side...

Reproduction of the original door shell assembly designed for use with 1981-87 Buick Regal, Grand National, and Cutlass Supreme model as listed. Each door shell is manufactured in quality stamped steel to correct factory...

Reproduction of the original style trunk floor side extension and body mount brace designed for use with 1978-88 Cutlass, Monte Carlo, and Grand Prix models. Each extension is manufactured in stamped steel replicating the...

Reproduction of the original style trunk pan plug designed for use on various 1978-88 Buick Regal and G-Body models. Each floor pan plug is manufactured in stamped steel to original factory specifications featuring correct...

Reproduction of the original outer door skin designed for use with 1981-87 Buick Regal, Grand National, and Cutlass Supreme models as listed. Each outer door skin is manufactured in quality stamped steel to correct factory...

Reproduction of the original outer door skin designed for use with 1981-87 Buick Regal, Grand National, and Cutlass Supreme models as listed. Each outer door skin is manufactured in quality stamped steel to correct factory...

Reproduction outer wheelhouse panel for 1981-87 models. Manufactured to factory specifications, and EDP coated for rust prevention. Right Hand Note: Shipped double oversize.

Reproduction of the original style full floor pan half for use with various 1978-87 G-Body 2 door models. Manufactured to factory specifications, featuring original style contours and stiffening ribs for added support...

Reproduction of the original windshield A-pillar designed for use with 1978-87 GM G-Body models with the t-top roof option. Each A-pillar is manufactured to correct factory specifications replicating the original design,...

Reproduction lower A pillar repair panel for various 1978-88 G-Body models. Manufactured to factory specifications for proper fitment and appearance. Comes EDP coated for rust prevention. Fits RH-Passenger side of the...

Reproduction of the original style full floor pan half for use with various 1978-87 G-Body 2 door models. Manufactured to factory specifications, featuring original style contours and stiffening ribs for added support...

Reproduction of the original front fender louvers designed for use with 1987 Buick GNX models. These fender louvers were specifically designed to help eliminate heat from the engine compartment while adding a performance...

Reproduction of the original door shell assembly designed for use with 1981-87 Buick Regal, Grand National, and Cutlass Supreme model as listed. Each door shell is manufactured in quality stamped steel to correct factory...

Reproduction of the original trunk lid designed for use with 1981-87 Buick Regal models. Each trunk lid is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...

Reproduction outer wheelhouse panel for 1981-87 models. Manufactured to factory specifications, and EDP coated for rust prevention. Left Hand Note: Shipped double oversize.