Chevrolet Camaro Parts - Antenna Parts

This is the tool you've been looking for to remove antennas. Simple and compact, this tool fits most antenna bezel nuts. Compared to other tools, it is easier to carry and allows for better use than the average pliers....

Buick applications: 1978-85 Century 1992 Century 1979-84 Electra 1979-86 Estate Wagon 1979-85 Lesabre 1978-81 Regal 1979-81 Riviera 1980-81 Skylark Cadillac applications: 1980-81 Deville 1984 Deville 1979-81 Eldorado 1980-85...

OER reproduction of the original radio antenna cable designed for various GM models including 1970-92 Camaros and Firebirds with a built in windshield antenna. This antenna cable is manufactured with stamped steel ends for an...

The RetroSound® amplified AM/FM hide-away antenna is a great solution for anyone who doesn't want to install a standard fender-mount antenna. This hidden antenna installs in seconds using a standard antenna plug and your...

Antenna adapter required for aftermarket radios. Used with Radio Dash Kit p/n GF6300.

Reproduction of the original radio antenna grounding plate for use with various 1965-75 GM models. Often referred to as a bezel or ring, this special bronze radio grounding plate mounts on the underside of the front fender...

When it comes to installing an antenna on your new front fender, you'll want to make sure it the holes are drilled in the proper location. With this template, you can do just that. Simply apply the template to your Camaro...

When it comes to installing an antenna on your new front fender, you'll want to make sure it the holes are drilled in the proper location. With this template, you can do just that. Simply apply the template to your Camaro...

This original GM antenna is the perfect way to replace or upgrade your original. Fits various 2008-2015 Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac and Saturn vehicles.

Reproduction of the original style antenna mounted on the rear quarter panel. Includes: Cable Mast Antenna body assembly Chrome bezel Chrome bezel nut Gasket Bronze ante nna grounding plate

Reproduction of the original chrome front fender antenna bezel designed for use on various Camaro and Firebird models from 1969-1975. The bezel is manufactured in zinc die-cast metal to OE speicifactions. Includes a polished...

Reproduction of antenna bezel designed for 1982-92 Camaro and Firebird models. Features correct configuration allowing the antenna to install properly. Applications: 1982-1992 Chevrolet Camaro 1982-1992 Pontiac Firebird...

Factory rear mount antennas were a fairly rare option for 1967-69 Camaro's. Whether you're installing your rear mount antenna on new sheet metal, or installing on a Camaro that wasn't originally equipped with one, you'll need...

Replacement telescoping-mast antenna assembly for 1970-81 Camaro models equipped with a fender-mounted antenna. Manufactured in brass and triple-chrome plated for a durable finish. Features metal mounting hardware and a 10'...

Replacement fixed-mast antenna assembly for 1970-81 models equipped with a fender-mounted antenna. Manufactured in brass and triple-chrome plated for a durable finish. Features metal mounting hardware and a 10' cable. ...

Chrome bezel which inserts under the antenna bezel nut on top of the fender. Quality bezel manufactured to exact specifications for an authentic appearance. Applications 1967-1969 Chevrolet Camaro 1967-1968 Pontiac Firebird

Reproduction of the original style non-telescoping fixed mast antenna mounted on the front fender for models with AM/FM radio. Each assembly includes the cable, non-telescoping round-tip fixed mast , chrome retainer, chrome...

Reproduction cowl to hood ground strap for 1968-81 Camaro models. This ground strap is installed on the cowl panel and helps prevent static electricity that interferes with the radio. Some vehicles used up to 3 straps....

Reproduction of the original fender mounted chrome antenna bezel designed for use on various GM models. Manufactured in die-cast zinc to factory dimensions featuring brightly polished triple chrome plating. This chrome bezel...

Reproduction of the original chrome flat style (non-domed) bezel nut designed for use on various 1969-96 GM models. This chrome antenna bezel nut is manufactured in zinc die-cast metal and chrome plated to a lusterous shine....

Reproduction rear antenna bezel for 1967-69 Camaro and 1967-68 Firebird models equipped with rear mounted antenna.

Antenna adaptor needed to install Double DIN radio bezel

Repair the antenna mast and cable for the power antenna with this reproduction repair set. Works on various 1982-93 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed below. Comes complete with the mast and cable....

Reproduction rear antenna plate for 1967-69 Camaro and 1967-68 Firebird models equipped wih rear mounted antenna.

This original GM antenna is the perfect way to replace or upgrade your original.

This tool is for models with a smooth antenna nut and 2 notches on the bottom. Allows you to remove or install your antenna without damaging the nut on your classic.

ACDelco replacement antenna for models equipped with a standard (fixed) antenna, with 6mm threaded base. Black antenna. Replaces OE #'s 10425536, 15264469. Buick Applications: 2005 Allure 1997-05 Century 2005 LaCrosse ...

Replace your original worn out antenna cable with this superb reproduction of the original GM cable. Get your antenna working and have good reception once again!

Correct reproduction of the original antenna body designed for use with various 1967-72 Chevrolet car and truck models. For use with AM, or AM/FM antennas. Includes the complete body assembly as shown. Features the...

Reproduction of the original style non-telescoping fixed mast antenna mounted on the front fender for various 1968-69 GM models with AM/FM radio. Each set includes the cable, non-telescoping round-tip, fixed mast with chrome...

OEM factory correct reproduction of the original AM telescopic antenna, mast, and hardware designed for use with 1969 Camaro models. Each antenna assembly is designed and manufactured to replicate the original components for...

Reproduction of the original AM radio oval tip telescopic antenna, mast, and hardware designed for use with 1967-68 Camaro models. Each antenna assembly is designed and manufactured to replicate the original components for a...

OER® reproduction of the original GM AM/FM non-telescopic stainless steel fixed front fender antenna mast for use on various GM models with an AM/FM radios including 1969 Camaro and Firebird models. Measures 30"...

Correct OER® reproduction antenna gasket found on a variety of GM vehicles equipped with fender mount AM or AM/FM antennas. Each gasket is manufactured to OE specifications and replaces the original exactly. Be sure your...

Correct reproduction of the original slip-fit style AM/FM antenna designed for use with various 1964-75 Camaro, Firebird, Impala, Bel Air, Biscayne, and Caprice models. Antenna is designed for use on the RH front fender....

OEM factory correct reproduction of the original rear quarter panel AM/FM telescopic antenna, mast, and hardware designed for use with 1967-68 Camaro models. Each antenna assembly is designed and manufactured to replicate the...

OEM factory correct reproduction of the original rear quarter panel AM telescopic antenna, mast, and hardware designed for use with 1969 Camaro models. Each antenna assembly is designed and manufactured to replicate the...

Correct reproduction of the original slip-fit style AM/FM antenna designed for use with various 1964-75 Camaro, Firebird, Impala, Bel Air, Biscayne, and Caprice models. Antenna is designed for use on the RH front fender....

Reproduction stainless steel fixed antenna mast to fit a variety of GM applications. This round shaped fixed antenna mast is for models with AM/FM style radios, and features a 30" non-retractable, also known as a...

Reproduction of the original rear mount antenna cable and body designed for use with Camaro, Firebird, and Corvette rear quarter mount antennas. Each cable is designed to replace the original exactly. Replace your original...

OER® chrome bezel nut which inserts under the antenna bezel nut on top of the fender. For use with reproduction antenna base only. You are assured that every OER® part offered is manufactured to exact...

OER® reproduction of the original chrome antenna bezel nut designed for use with various 1965-81 GM models. Each bezel nut is manufactured in die-cast zinc metal and chrome plated and matches the original in appearance...

Replace your worn out antenna body and cable with this quality reproduction antenna cable assembly designed to fit the applications listed below. For use with AM or AM/FM antennas with a plug in/nut retained style mast....

Reproduction of the original style round telescopic antenna mast designed for use on various GM models from 1962-72 including GM trucks. This reproduction of the original telescoping antenna mast is manufactured to original...

Reproduction of the original 1967-68 GM oval-tipped telescoping AM/FM antennas with threaded end which screw into the antenna body mounted on the front fender. Produced in stainless steel for longevity. Replaces GM part #...

Correct reproduction of the original 1967-68 GM oval-tipped telescoping AM/FM antennas with threaded end which screw into the antenna body mounted on the front fender. Comes chrome-plated as original. Replaces GM part #...

This relay is mounted on the base of the power antenna motor. This relay may become inoperative over time due to excessive heat and electrical loads, leaving you without the use of its power antenna. Also used for headlamp...

This is an extension antenna with cable from Dakota Digital, which threads easily into your GPS sensor unit. This extension allows you to hide the GPS sensor anywhere in your vehicle and still have your receiver acquire the...

This adapter allows you to turn a standard AM/FM antenna into an antenna that will receive both AM/FM stations and Digital Audio Broadcast (DAB/DAB+) stations. It has a DAB antenna output that plugs into the DAB input on the...

If you want great reception without a visible antenna, then the OER® Authorized Hide-a-Way amplified electronic antenna may be just what you need! A major breakthrough in antenna science, the OER® Authorized...

The RetroSound® universal PA-02 is a direct-fit replacement antenna for your classic or late model vehicle. The motor is mounted remotely from the mast assembly, enabling a wide variety of installations where space is...

Aftermarket replacement antenna features a telescopic mast that can be manually retracted in order to prevent it from being broken off or bent by low hanging branches, or bushes. This antenna mast is designed for mounting on...

Universal-fit, service replacement antenna for classic or late model vehicles with power antenna option. Each motor is mounted directly to the mast assembly and is designed to mount with the universal-fit bracket and 160 inch...

The RetroSound® universal PA-03 is a miniature fully automatic power antenna requiring just 8-1/2 inches of clearance beneath your fender. It includes a custom head kit with six different bases to specifically fit a wide...