Chevrolet Camaro Parts - Brake Accessories

Correct reproduction of the original style brake bleeder screw designed for use with various 1962-79 GM models as listed. Bleeder valves should be replaced whenever rebuilding your brakes. After years of use the valve can...

Use with power brake bleeder # 14227 for 1992-02 models with plastic master cylinder and a twist-lock cap.

Reproduction of the power brake lamp switch bracket. This quality bracket mounts on the brake pedal and engages the stop lamp switch on 1967-69 Camaro models equipped with optional power brakes.

This low pressure hydraulic brake pressure switch from Ron Francis Wiring has a much longer life than previous models available anywhere. This unit fits most cars and requires 20-50 pounds pressure, instead of stock units...

This service replacement switch is for use with the GM applications listed below. This is a service replacement switch which may differ cosmetically from the original switch but will fit and function as original. ...

Aftermarket replacement brake lamp switche for 1999-02 Camaro models. This electro-mechanical device is used to activate the stop lights when the brake pedal is depressed.

Replace your original inoperative stop lamp switch with this aftermarket service replacement mechanical stop lamp switch. This switch is a service replacement part that may not match the original switch cosmetically. However,...

Original GM gasket. The gasket inserts between the steering knuckle and backing plate. Helps eliminate noise or squeaking when applying the brakes. Sold individually. Applications: 1970-81 Camaro 1970-81 Fir ebird 1971-96...

Aftermarket replacement brake lamp switches for models with out cruise control. This electro-mechanical device is used to activate the stop lights when the brake pedal is depressed. {fitment}

Improve the appearance of your engine bay with this aluminum brake reservoir cover. Features Fits over factory plastic brake reservior tank and can be installed in just minutes TIG Welded Corners Can be po lished, chromed,...

Lokar 1984-1987 Corvette rear brake clevis set (Corvette and Baer brakes) Made in USA

Aftermarket replacement brake lamp switches for 1987-1992 Camaro models with cruise control. This electro-mechanical device is used to activate the stop lights when the brake pedal is depressed.

Correct reproduction of the original brake backing plate gasket designed for use with 1967-69 Camaro and Firebird models. The gasket inserts between the steering knuckle (spindle) and brake backing plate. Helps eliminate...

Stop the other Camaro owners in their tracks when they see your stainless steel Super Sport style brake caliper covers.

Reproduction of the original brake lamp switch retaining clip designed for use with various 1967-91 GM models. This clip holds the brake lamp switch in place and designed for 1/2" diameter switches. Replaces original GM part...

Reproduction of the original rear brake backing plates for models with 9-1/2" rear drum brakes. Stamped to exact factory specifications featuring the correct thickness and includes the riveted stud. Sold as a pair. ...

Reproduction of the original back-up lamp switch mounting bracket designed for use with 1967-68 Camaro, and 1968 Chevy II Nova models with manual transmissions. The back-up switch bracket is manufactured to exact...

This attractively designed fluid reservoir blends well with traditional or contemporary engine compartments. Fluid lines can be run out of the back or bottom of reservoirs 1/8" NPT (plugs included for unused holes). Made in...

This attractively designed fluid reservoir blends well with traditional or contemporary engine compartments. Fluid lines can be run out of the back or bottom of reservoirs 1/8" NPT (plugs included for unused holes). Made in...

This attractively designed fluid reservoir blends well with traditional or contemporary engine compartments. Fluid lines can be run out of the back or bottom of reservoirs 1/8" NPT (plugs included for unused holes). Made in...

This attractively designed fluid reservoir blends well with traditional or contemporary engine compartments. Fluid lines can be run out of the back or bottom of reservoirs 1/8" NPT (plugs included for unused holes). Made in...

This attractively designed fluid reservoir blends well with traditional or contemporary engine compartments. Fluid lines can be run out of the back or bottom of reservoirs 1/8" NPT (plugs included for unused holes). Made in...

Give your Gen5 Camaro the look and style of a big brake system without the expense. Easily installs in about 10 minutes per wheel. Not only do these caliper covers enhance the appearance of your wheel area, but they also...

Give your Gen5 Camaro the look and style of a big brake system without the expense. Easily installs in about 10 minutes per wheel. Not only do these caliper covers enhance the appearance of your wheel area, but they also...

Give your 1994-97 Camaro or Firebird the look and style of a big brake system without the expense. Easily installs in about 10 minutes per wheel. Not only do these caliper covers enhance the appearance of your wheel area, but...

Give your 1998-02 Camaro or Firebird the look and style of a big brake system without the expense. Easily installs in about 10 minutes per wheel. Not only do these caliper covers enhance the appearance of your wheel area, but...

Give your Gen5 Camaro the look and style of a big brake system without the expense. Easily installs in about 10 minutes per wheel. Not only do these caliper covers enhance the appearance of your wheel area, but they also...

Give your Gen5 Camaro the look and style of a big brake system without the expense. Easily installs in about 10 minutes per wheel. Not only do these caliper covers enhance the appearance of your wheel area, but they also...

Give your Gen5 Camaro the look and style of a big brake system without the expense. Easily installs in about 10 minutes per wheel. Not only do these caliper covers enhance the appearance of your wheel area, but they also...

Improve the appearance of your engine bay with this aluminum ABS pump cover. Features Attaches over Factory ABS Braking Pump, covers up the spaghetti-like tubing that comes out of the pump, including covering the ABS p ump...

Give your Gen5 Camaro the look and style of a big brake system without the expense. Easily installs in about 10 minutes per wheel. Not only do these caliper covers enhance the appearance of your wheel area, but they also...

These adapter fitting simplify the installation of a Roll/Control system into late model Camaro, Firebird or Mustang vehicles having metric threaded brake line fittings. Designed to be used with the Hurst Roll/Control...

Reproduction of the OE caliper bracket designed for use on various 1969-74 GM models equipped with single piston disc brake calipers. Each bracket is stamped steel construction featuring all of the correct holes, curves and...

Wilwood ten pound residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. With drum brakes, a ten pound valve is used to compensate for...

Reseal your brake caliper with this repair set. 1 set required per piston. 2 sets required per vehicle. Buick Applications: 1975 Apollo 1975-77 Century 1991-96 Commercial Chassis 1975-78 Electra 1979 Electra Rear Drum...

Give your Gen5 Camaro the look and style of a big brake system without the expense. Easily installs in about 10 minutes per wheel. Not only do these caliper covers enhance the appearance of your wheel area, but they also...

Wilwood pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The two pound valve is used in disc brake applications where the master cylinder is...

Made out of aluminum, 2.44" ID. Used on Wilwood hats or rotors with center register diameters less than 3.06"

Now you can bleed your hydraulic braking system quickly and easily by yourself! "Speed Bleeders" simply replace your original bleeder screws at each wheel cylinder (drum brakes) or caliper (disc brakes). The patented,...

Now you can bleed your hydraulic braking system quickly and easily by yourself! "Speed Bleeders" simply replace your original bleeder screws at each wheel cylinder (drum brakes) or caliper (disc brakes). The patented,...

Now you can bleed your hydraulic braking system quickly and easily by yourself! "Speed Bleeders" simply replace your original bleeder screws at each wheel cylinder (drum brakes) or caliper (disc brakes). The patented,...

Now you can bleed your hydraulic braking system quickly and easily by yourself! "Speed Bleeders" simply replace your original bleeder screws at each wheel cylinder (drum brakes) or caliper (disc brakes). The patented,...

Now you can bleed your hydraulic braking system quickly and easily by yourself! "Speed Bleeders" simply replace your original bleeder screws at each wheel cylinder (drum brakes) or caliper (disc brakes). The patented,...

Reduce the chance of rolling the lights and produce more effective "burn outs" with the original Hurst Roll/Control! Used primarily in drag racing to provide positive locking action to the front wheels of race cars. In tests,...

Reproduction of the original blue bleeder valve dust caps designed for use with various models from 1969-1978. These dust caps are installed in seconds on your brake bleeder screws to keep road debris and the elements from...

The Roll/Control Installation Kit is designed to be used in conjunction with most brake holding devices on American made vehicles. This kit contains brake lines and various brass fittings, connectors, adapters, unions and...

Proportioning valve pressure warning light socket and pigtail. Required when adding disc brake master cylinder and proportioning valve to hook up the brake warning light. Note:For use with part #PV71 only.

The Rotor and Hat Register Adapters are used to locate one-piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires...