Chevrolet Camaro Parts - Brake Hardware

No brake job is complete without new brake hardware! This professional quality brake hardware kit is packaged in a complete axle set. No longer do you have to search for every little piece when rebuilding your brakes... this...

No brake job is complete without new brake hardware! This professional quality brake hardware kit is packaged in a complete axle set. No longer do you have to search for every little piece when rebuilding your brakes... this...

Correct replacement shoe guide for all front and rear drum brake applications. This plate holds the top of the brake shoes in place. 2-15/16" o.l. x 7/64" thick.

Brake adjusting hole cover is for use on various GM models. Original GM. Sold individually.

This drum brake self-adjuster repair kit for the rear LH (left hand) side is manufactured and tested to the strictest OE standards for unparalleled performance. Built for trouble-free ownership and 100% visually inspected and...

This drum brake self-adjuster repair kit for the rear RH (right hand) side is manufactured and tested to the strictest OE standards for unparalleled performance. Built for trouble-free ownership and 100% visually inspected...

This 18-piece hardware set includes the front rotor and spindle nuts, washers, pins necessary to hold the rotor or drum to the spindle, spindle to the upper/lower control arms and the spindle to the end link. For use with...

Reproduction adjusting spring for use on models with 4 wheel disc brakes. 2 required per vehicle. Note: Spring will be in natural color not black as shown. Applications: 1968-1969 Camar o with rear disc 1965-82 Corvette...

Kit includes; 1 Brake pad pin 2 Caliper mounting bolts 1 Cotter pin One kits is required per caliper.

No brake job is complete without new brake hardware! This professional quality brake hardware kit is packaged in a complete axle set. No longer do you have to search for every little piece when rebuilding your brakes... this...

Specially drilled bolt that secures the brake line to the caliper. Includes 2 bolts and 4 washers (gaskets).

Original GM gasket. The gasket inserts between the steering knuckle and backing plate. Helps eliminate noise or squeaking when applying the brakes. Sold individually. Applications: 1970-81 Camaro 1970-81 Fir ebird 1971-96...

This kit includes the brake shoe adjustment sprocket, brake shoe upper retainer and the adjustment plate. Fits 1964-78 front or rear left hand side

This kit includes the brake shoe adjustment sprocket, brake shoe upper retainer and the adjustment plate. Fits 1964-78 front or rear right hand side

Recommended replacement whenever replacing your front disc brakes. 2 required. Clip on type.

Reproduction of the original style front disc brake back plate or dust shield for use various 1970-90 GM models. The backing plate will help to keep brake pad dust from contaminating front suspension components. Sold in...

Reproduction of the commonly missing 1969 brake hose to upper A-arm attachment strap. Originally installed by GM and often broken or discarded over the years.

Drum Brake Adjusting Screw {fitment}

No brake job is complete without new brake hardware! This professional quality brake hardware kit is packaged in a complete axle set. No longer do you have to search for every little piece when rebuilding your brakes... this...

Correct reproduction of the original brake backing plate gasket designed for use with 1967-69 Camaro and Firebird models. The gasket inserts between the steering knuckle (spindle) and brake backing plate. Helps eliminate...

Reproduction of the original style front disc brake back plate or dust shield for use various 1970-90 Chevrolet, Buick, Oldsmobile and Pontiac models. The backing plate will help to keep brake pad dust from contaminating...

A 4 wheel disc brake set-up is rare enough let alone finding the OE style front bracketry. Classic Industries® is pleased to offer a pair of forged brackets for the rare 4 wheel disc brakes option.

This hardware set includes the front nuts, washers and pins needed to hold the rotor to the spindle for disc brakes and hub for drum brakes.

No brake job is complete without new brake hardware! This professional quality brake hardware kit is packaged in a complete axle set. No longer do you have to search for every little piece when rebuilding your brakes... this...

Replacement caliper mounting bolts. Sold individually. 2 required per caliper. Applications: 1988 Camaro with 1LE Suspension 1989-97 Camaro 1988 Firebird with 1LE Suspension 1989-97 Firebi rd

Reproduction of the original style front disc brake back plate or dust shield for use various 1970-90 Chevrolet, Buick, Oldsmobile and Pontiac models. The backing plate will help to keep brake pad dust from contaminating...

No brake job is complete without new brake hardware! This professional quality brake hardware kit is packaged in a complete axle set. No longer do you have to search for every little piece when rebuilding your brakes... this...

Reproduction of the original style bleeder screws designed for use with various 1967-74 GM models as listed. Includes front brake plastic OEM dirt caps. Designed for bleeding brakes. Includes set of 6 screws. {fitment}

Rear brake hose mounting bolt 3/8" shank. Needed to mount hose to rear bracket.

Replacement caliper mounting bolts. Sold as a pair. One pair required per caliper.

Rear retaining pins, springs and cups for models with 9-1/2" drum brakes. Sold as a wheel set. Applications: 1967-81Camaro 1965-72 Chevelle 1965-72 El Camino 1967-97 Firebird 1977-96 Impala 1977-96 Caprice 1964-79 Chevy II...

Correct reproduction of the original style brake pad pin designed for use with 1967-68 Camaro and Firebird models. This 4 piston caliper pin replaces the original exactly. For use on all models with factory original 4 piston...

Rebuilding your disc brake calipers? Don’t forget to replace the pistons! Moisture is drawn in as brake system cools, causing hidden problems that can only be eliminated with a complete caliper rebuild. For this reason, we...

No brake job is complete without new brake hardware! This professional quality brake hardware kit is packaged in a complete axle set. No longer do you have to search for every little piece when rebuilding your brakes... this...

Front disc brake 4 piston caliper mounting brackets for 1967-68 Camaro models with 4 piston calipers only. Brackets feature the correct plating and are replacements for the original GM part # 1381720 RH and 1381721 LH...

SL6 billet six-piston calipers with 13" or 14" rotors deliver the ultimate combination for braking power and style in this group of sets engineered for traditional non-ABS spindles on American muscle cars. Built exclusively...

Correct replacement rear drum brake show spacer bar designed for 1967-81 Camaro, Firebird, and 1978-87 Regal models that weren't equipped with disc brakes. This show spacer bar is used to set the brake shoes apart when the...

SL6 billet six-piston calipers with 13" or 14" rotors deliver the ultimate combination for braking power and style in this group of sets engineered for traditional non-ABS spindles on American muscle cars. Built exclusively...

Rebuilding your disc brake calipers? Don’t forget to replace the pistons! Moisture is drawn in as brake system cools, causing hidden problems that can only be eliminated with a complete caliper rebuild. For this reason, we...

This set is correct for the 1969-72 A/F/X Body single piston banjo bolts with the factory correct 5/8" head. Includes 4 crush washers. IMPORTANT: Make sure to check the size of the banjo bolt. GM used two different bolts:...

No brake job is complete without new brake hardware! This professional quality brake hardware kit is packaged in a complete axle set. No longer do you have to search for every little piece when rebuilding your brakes... this...

Specially drilled bolt that secures the brake line to the caliper. Includes 2 bolts and 4 washers (gaskets).

Reproduction of the original style drum brake bleeder screws designed for use with various 1965-72 GM models as listed. Includes front brake plastic OEM dirt caps. Designed for bleeding brakes. Includes set of 4 screws. ...

Reproduction of the original style 2" drop spindles for various 1964-72 Buick, Chevrolet, Pontiac, and Oldsmobile A, F, and X body models. These 2" drop spindles will replace OE single piston disc brake spindles. The stock...

Reproduction of the original style front disc backing plates designed for use with various 1969-74 GM models. Each backing plate is manufactured to OE specifications replicating the original. For use with single piston front...

Reproduction of the original disc brake backing plates for use with various 1967-68 GM models with 4 piston caliper front disc brakes. These backing plates are manufacxtured to replciate the originals in quality and design....

Reproduction style front disc backing plates designed for use with various 1964-74 Buick, Chevrolet, Oldsmobile, and Pontiac models with 2" drop spindles. Fits most A, F, X-Body applications that are running our part # 153636...

This set is correct for the 1978-81 A/F/X Body single piston banjo bolts with the factory correct 5/8" head. Includes 4 crush washers. IMPORTANT: Make sure to check the size of the banjo bolt. GM used two different bolts:...

Reproduction of the original rear brake backing plates for models with 9-1/2" rear drum brakes. Stamped to exact factory specifications featuring the correct thickness and includes the riveted stud. Sold as a pair. ...

Front brake hose to subframe bracket set, fits disc or drum brakes. Brackets mount on the side of the subframe. This is a pair of front hose brackets (mounted at frame) for 1967-68 Camaros & Firebirds with front disc or drum...

Rebuilding your disc brake calipers? Don’t forget to replace the pistons! Moisture is drawn in as brake system cools, causing hidden problems that can only be eliminated with a complete caliper rebuild. For this reason, we...

Reproduction of the original caliper mounting pins for single piston calipers. Sold as a pair. One pair per caliper required. Applications: 1969-81Camaro models 1969-81Firebird models 1968-96 Impala / full size models...

AC Delco replacement outer O-ring bushing which the caliper bolt and bushings goes through when installed. For use on single piston caliper disc brake models. Sold individually. 4 required. Applications: 1969-96 Camaro...

Tee bolt kit to secure brake backing plate to housing. Required when using Wilwood Brakes. Includes bolts, and aircraft style lock nuts for a complete installation. Made in USA Note: Special order, must be prepaid....

Special bolts required to secure the caliper bracket to the spindle.

3/4"-20 With 1-1/16" hex head spindle nut and plated 1/8" x 1-1/2" cotter pin for securing drum or rotor to spindle. Kit contains one nut and one cotter pin. 2 kits required per vehicle. {fitment}

Replacement caliper mounting bolts. Sold as a pair. One pair per caliper required. Applications: 1978-87 Buick Regal 1971-91 Chevy Truck Regal 1982-87 Camaro 1988-92 Camaro without 1LE Suspension 1982-87 Firebird 1988-92...

Replacement caliper mounting bolts. Sold as a pair. Applications: 1998-02 Camaro 1998-02 Firebird