Chevrolet Camaro Parts - Exhaust

Flowmaster® has taken the laminar core of our classic HP-2 muffler and wrapped it in a new compact square case. The new Super HP-2 Series muffler offers the same great performance benefits and moderate tone that you would...

Correct replacement muffler clamp is designed to replace the factory originals. This is the early style original replacement clamp for the discriminating restorer! Each clamp includes hardware.

Dress up your exhaust with a classic straight tip or add some extra punch with something a little bolder. Whatever the look you crave, the line of 304 stainless steel Pypes exhaust tips will provide years of eye-popping...

Titanium exhaust wrap from DEI. Withstands 1800 of direct, and 2500 of intermittent heat. Extremely pliable for an easy install with no wetting necessary. Very durable with high resistance to abrasions, oil and chemicals, and...

Thermo-Sleeve is the combination of a high temperature fabric laminated to a highly reflective Mylar foil. It provides protection from radiant heat for hoses and wires. Thermo-Sleeve?s ultra lightweight construction provides...

This Clamp-On Heat Shield incorporates Thermo-Tec's proprietary coating technology developed by Thermo-Tec, Thermal Conduction Technology. The new and improved flexible Clamp-On Heat Shield blocks over 95% of the damaging...

Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA Set includes: Eight 9"...

The 80 series is a cross-flow design for applications where the muffler is mounted transversely behind the rear end. Delivering an aggressive muscle car sound both inside and outside the vehicle. Constructed of 16 gauge...

This is the most aggressive sounding street/strip muffler that Flowmaster® offers. If you?re looking for attention, this one will get you noticed. The original standard 40 series has an "aggressive rumble" and will...

Flowmaster's Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we've ever...

The original Exhaust Insulating Wrap™ was developed over 25 years ago by Thermo-Tec®. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust...

Flowmaster® has taken the laminar core of our classic HP-2 muffler and wrapped it in a new compact square case. The new Super HP-2 Series muffler offers the same great performance benefits and moderate tone that you would...

Hi-Tech Carbon Fiber appearance and Titanium like strength, Carbon Fiber Exhaust Insulating Wrap is produced utilizing pulverized Lava rock called basalt. It is extremely pliable, resistant to discoloration and can withstand...

This Ultra-Lite insulating mat was designed with the racer in mind. The new Heat Terminator is made of the highest-quality insulating materials available today. The material is made of a highly-textured aluminum composite...

To finish off a clean and well-protected Exhaust Insulating Wrap application it is recommended to use the Hi-Heat Coating. The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders...

OER® Hi-Temp Exhaust Coat is a fast drying coating designed to withstand temperatures of up to 1200° F on a continuous basis. After curing, it forms a porcelain-like bond. Its special formula resists blistering,...

This is the most "aggressive" sounding street/strip muffler that Flowmaster offers. If you?re looking for attention, this one will get you noticed. The standard 40 series has an "aggressive rumble" and will generally...

OER® Hi-Temp Exhaust Coat is a fast drying coating designed to withstand temperatures of up to 1200° F on a continuous basis. After curing, it forms a porcelain-like bond. Its special formula resists blistering,...

The Super 44 offers maximum performance, an improved flow path radius, generates more torque / power than ever before and is the most aggressive, deepest toned street and strip muffler Flowmaster has ever made! If you...

3-bolt flange header reducers from Hedman Hedders. These reducers have two flat mating surfaces with a gasket for a leak-free joint. Necessary gaskets and hardware included.

This Ultra-Lite insulating mat was designed with the racer in mind. The new Heat Terminator is made of the highest-quality insulating materials available today. The material is made of a highly-textured aluminum composite...

BBK Varitune mufflers are the first of their kind in the aftermarket fully adjustable performance Mufflers. They can be adjusted for sound and exhaust flow by simply moving the adjustment screw in or out from underneath the...

The original Exhaust Insulating Wrap™ was developed over 25 years ago by Thermo-Tec®. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust...

This Ultra-Lite insulating mat was designed with the racer in mind. The new Heat Terminator is made of the highest-quality insulating materials available today. The material is made of a highly-textured aluminum composite...

This Ultra-Lite insulating mat was designed with the racer in mind. The new Heat Terminator is made of the highest-quality insulating materials available today. The material is made of a highly-textured aluminum composite...

Form-A-Barrier by Design Engineering Inc. is a light weight, formable shield to protect components from heat. This 12" x 12" rigid shield provides excellent thermal protection up to 1300°F with minimal gap of 1 inch to heat...

This Ultra-Lite insulating mat was designed with the racer in mind. The new Heat Terminator is made of the highest-quality insulating materials available today. The material is made of a highly-textured aluminum composite...

The Super 44 offers maximum performance, an improved flow path radius, generates more torque / power than ever before and is the most aggressive, deepest toned street and strip muffler Flowmaster has ever made! If you...

The Super 44 is the most aggressive, deepest toned street and strip muffler Flowmaster has ever made! The Super 44?s offer maximum performance, an improved flow path radius, and generates more torque and more power than ever...

The 80 Series is designed for applications where the muffler must be mounted transversely (cross-flow) behind the rear end. This muffler provides an aggressive muscle car sound both inside and outside the vehicle. A...

The Header Manifold Blanket™ provides excellent heat-retention for exhaust headers and manifolds. This flexible heat shield simply clips into place on the upper portion of the header. The fabric side of the material...

The Super 40 features Flowmaster's Delta Flow technology. It's larger case provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the...

Generation II Copper Header Wrap improves heat resistance up to 30% more than current technology by utilizing a new proprietary coating developed by Thermo-Tec's improved Thermal Conduction Technology (TCT™). ...

Thermo-Sleeve is the combination of a high temperature fabric laminated to a highly reflective Mylar foil. It provides protection from radiant heat for hoses and wires. Thermo-Sleeve?s ultra lightweight construction provides...

Exhaust tip with straight-edge, angle-cut end. This weld-on tip is finished with an embossed Flowmaster logo. Made in USA Sold individually.

This header collector set takes the place of messy three-bolt, flange-type connections and allows for a leak-free and gasket-free ball-flange type connection. Made in USA Emission Note: 50- State Legal This part is legal...

Stainless steel exhaust clamps are now available for chambered or aluminized exhaust systems. This stainless steel clamp offers long-lasting effectiveness over the original style non-coated clamps.

This Clamp-On Heat Shield incorporates Thermo-Tec's proprietary coating technology developed by Thermo-Tec, Thermal Conduction Technology. The new and improved flexible Clamp-On Heat Shield blocks over 95% of the damaging...

PROFORM Grade 8 (12.9 steel) header bolts are designed to keep bolts from backing off. These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently torqued, the washers...

This two chamber design incorporates Flowmaster's patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced...

This Clamp-On Heat Shield incorporates Thermo-Tec's proprietary coating technology developed by Thermo-Tec, Thermal Conduction Technology. The new and improved flexible Clamp-On Heat Shield blocks over 95% of the damaging...

Titanium exhaust wrap from DEI. Withstands 1800 of direct, and 2500 of intermittent heat. Extremely pliable for an easy install with no wetting necessary. Very durable with high resistance to abrasions, oil and chemicals, and...

The Super 40 features Flowmaster's Delta Flow technology. It's larger case provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the...

Ten mil aluminum bonded to woven glass fiber with a hi temp adhesive backing. Designed to withstand temperatures up to 1750 degrees. The adhesive backing adhere to almost anything while withstanding temperatures over 450...

The original Exhaust Insulating Wrap™ was developed over 25 years ago by Thermo-Tec®. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust...

The original Exhaust Insulating Wrap™ was developed over 25 years ago by Thermo-Tec®. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust...

Dress up your exhaust with a classic straight tip or add some extra punch with something a little bolder. Whatever the look you crave, the line of 304 stainless steel Pypes exhaust tips will provide years of eye-popping...

Cool-Tape is a flexible and durable thermal insulating tape, great for sealing the seams and edges of DEI Floor & Tunnel Shield. Capable of withstanding temps up to 2000 degrees.

This flexible, high temperature material makes it an excellent choice for any application when a versatile heat control product is needed. For conductive heat applications, the fabric side can handle temperatures in the range...

Flowmaster® has taken the laminar core of our classic HP-2 muffler and wrapped it in a new compact square case. The new Super HP-2 Series muffler offers the same great performance benefits and moderate tone that you would...

Pypes dual electric cutout set allows you to partially or fully open both your exhausts from one switch that you can mount anywhere in the car. Perfect for when a quick 10-20 horsepower is needed. Using only the highest...

This is the most "aggressive" sounding street/strip muffler that Flowmaster offers. If you?re looking for attention, this one will get you noticed. The standard 40 series has an "aggressive rumble" and will generally...

This Clamp-On Heat Shield incorporates Thermo-Tec's proprietary coating technology developed by Thermo-Tec, Thermal Conduction Technology. The new and improved flexible Clamp-On Heat Shield blocks over 95% of the damaging...

Titanium exhaust wrap from DEI. Withstands 1800 of direct, and 2500 of intermittent heat. Extremely pliable for an easy install with no wetting necessary. Very durable with high resistance to abrasions, oil and chemicals, and...

This is the latest three chamber design of the 50 series muffler that utilizes Flowmasters patented "Delta Flow" technology along with an internal tuning chamber to eliminate most all interior resonance and still have that...

The 80 Series is designed for applications where the muffler must be mounted transversely (cross-flow) behind the rear end. This muffler provides an aggressive muscle car sound both inside and outside the vehicle. A...

This Clamp-On Heat Shield incorporates Thermo-Tec's proprietary coating technology developed by Thermo-Tec, Thermal Conduction Technology. The new and improved flexible Clamp-On Heat Shield blocks over 95% of the damaging...

The 80 Series is designed for applications where the muffler must be mounted transversely (cross-flow) behind the rear end. This muffler provides an aggressive muscle car sound both inside and outside the vehicle. A...

The Super 40 features Flowmaster's Delta Flow technology. It's larger case provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the...

Exhaust tip, logo embossed polished stainless, rolled edge angle cut, 4.00 in. tip diameter x 3.50 in. pipe diameter x 10.00 in. length, weld on. Made in USA Sold individually. Features: Weld-On Angle Cut Design...