Chevrolet Camaro Parts - Exterior Trim

This seven piece kit includes the moldings which extend from the rear ledge of the hood section around to the rear of the door. Kit includes: 1 Hood Ledge Molding 2 Upper Rear Fender Moldings 2 Outer Door Reve al Moldings 2...

3M Plastic Emblem and Trim Adhesive is ideal for bonding and minor repairs on vinyl molding, interior trim, tail light lenses, plastic and metal emblems on interiors or exteriors. It dries quickly and is resistant to water,...

Stainless fender trim for 1993-96 Camaro. Liquidation Sale. All Sales Final. Set of 4.

Drake Muscle Cars' Quarter Panel Trim is made from ABS with a bright chrome or satin finish and black-shadow accents for an aggressive look and features 3M VHB adhesive backing for fast and secure installation.

The rear end of your Camaro could use some chrome. We suggest this chrome vinyl rear valance trim molding.

The center grill and headlamp doors have been heat stamped with chrome to match the original appearance. Originally the 1967 Rally Sport models featured an all-black grill and headlamp doors. If you want to restore your...

Why stop with wheel well moldings. These deluxe polished stainless steel rocker panel moldings will tie the whole package together in style. Note: Not for use with Rally Sport package.

The center grill and headlamp doors have been heat stamped with chrome to match the original appearance. Originally the 1968 Rally Sport models included chrome horizontal trim on the edging which is included on this grill and...

Replace worn out or damaged moldings with these quality reproductions. Reproduction of the original 1970-81 Camaro and Firebird window trim molding for use on vehicles with bright chrome drip rails. Manufactured from high...

Over Center Bracket Spring (2) Actuator Shields (RH and LH) Lower Actuator Brackets - Small (2) Rear Actuator Brackets - Large (2) Pin and Clevis Set (RH and LH) Actuator Filter Headlight Door Actuators (2) Relay Switch ...

Over Center Bracket Spring (2) Actuator Shields (RH and LH) Lower Actuator Brackets - Small (2) Rear Actuator Brackets - Large (2) Pin and Clevis Set (RH and LH) Actuator Filter Headlight Door Actuators (2) Relay Switch ...

Reproduction of the original standard Camaro park lamp aluminum trim designed for use on 1970-73 standard Camaro models. Manufactured in quality stamped alinimum, bezels are designed to install on original GM or OER...

Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 10 chrome phillips oval head #8 x 3/4" screws. Set includes 10 phillips oval head screws. Use as...

Reproduction of the original windshield side molding designed for use with 1967-69 Camaro and Firebird convertible models. Each molding is manufactured in quality stamped aluminum to correct factory specifications. Windshield...

Reproduction of the original windshield side molding designed for use with 1967-69 Camaro and Firebird convertible models. Each molding is manufactured in quality stamped aluminum to correct factory specifications. Windshield...

Protective alloy tracked side molding that was a factory or dealer option B84 or an aftermarket molding that was installed to protect the side of the car from door dings. Found on many cars in the 70s and 80s, these finely...

Protective alloy tracked side molding that was a factory or dealer option B84 or an aftermarket molding that was installed to protect the side of the car from door dings. Found on many cars in the 70s and 80s, these finely...

Give your retro Gen5 Camaro a unique vintage touch with Retro USA’s 1969-inspired quarter panel moldings. Inspired by the iconic designs of the 60’s and 70’s. Manufactured using chrome-plated injection-molded ABS plastic and...

Give your retro-inspired Gen Five Camaro an authentic touch with Retro USA’s 1968-69 Camaro SS-inspired hood louvers. Inspired by the iconic design of the hood louvers found on 1968 and 1969 Camaro SS models Manufactured...

Give your retro Gen5 Camaro a unique vintage touch with Retro USA’s 1969-inspired quarter panel moldings. Inspired by the iconic designs of the 60’s and 70’s. Manufactured using chrome-plated injection-molded ABS plastic and...

Correct reproduction of the original door mirror gaskets designed to insulate against vibration between the mirror assembly and the door. Helps prevents damage to door paint where mirror rests. Sold in pairs. Include RH and...

Authentic reproduction of the original tail lamp filler panel for 1979-81 Berlinetta Camaro models. Each filler is manufactured in injection molded ABS to exact factory specs. The filler applique attaches to the rear tail...

Authentic reproduction of the original tail lamp filler panel for 1985-92 Z28 Camaro, 1985-90 IROC-Z Camaro, and 1991-92 RS Camaro models. Each filler is manufactured in injection molded die-cast zinc and painted black with...

Correct reproduction of the original interior rear upper side panel molding designed for use on 1967 Camaro and Firebird models. Each molding is manufactured in correctly stamped stainless steel material to factory...

If you took one in the lower grill on the freeway, then replace it with this original GM lower grill. Note: Shipped Truck Freight.

Go for the ultimate in customization with this sporty Heritage upper grill with bow tie. Designed for perfect fit and easy installation, it replaces the existing grill on your Camaro. For Heritage grill with out bow tie, see...

Reproduction of the original stamped well molding clips designed and manufactured to attach the rear convertible well chrome molding around the top well.

Correct reproduction of the original outer door ledge reveal molding and window felt weatherstrip for 1968 Camaro convertible models. The moldings are manufactured in quality stamped aluminum with a polished chrome plated...

Reproduction of the original 1982-84 Camaro Z-28 grill front assembly designed for use on 1982-84 Camaro Z-28 models. Each grill is manufactured in injection molded ABS to original factory specifications. For use on passenger...

This three-piece grille assembly is precision CNC machined from billet aluminum  and consists of two grille pieces and a center cover plate. The grille includes an aluminum mesh insert and bolts into the stock mounting points...

Reproduction of the original type screws that attach the pillar post moldings on all 1968-69 Camaro and Firebird models. These phillips head screws will attach the pillar post moldings and feature a chrome finish. Sold in a...

Reproduction standard style front grill installed on all 1968 Camaro standard models (without the Rally Sport hideaway headlights option). Each grill is manufactured in injection molded ABS in the correct color argent silver...

This Restorer's Choice™ grill kit includes a Rally Sport grill, headlamp door covers, and the upper and lower grill and headlamp door moldings. The upper molding includes the header panel to molding attachment clips....

Highest quality reproduction on the market! This complete rear window molding set is designed to replace all 5 exterior back glass moldings on 1967-69 coupe models. Each molding is manufactured to exact factory specifications...

OER® reproduction of the original lower corner windshield molding clips for use with 1967-1969 Camaro and Firebird models. This clip is designed to retain the corner of the lower moldings to the windshield. These clips...

Reproduction molding retainer clip for a wide variety of 1964-72 GM models. Designed for emergency use, when a screw-on clip is required. Produced in spring steel to OE specifications. Sold individually. Replaces OE #...

Side moldings for 1993-02 F-Body models. Manufactured as an alternative to factory moldings, featuring front, and rear molded ends. Available molded in various colors as 2, 8' foot pieces that are cut to fit.

This three-piece grille assembly is precision CNC machined from billet aluminum  and consists of two grille pieces and a center cover plate. The grille includes an aluminum mesh insert and bolts into the stock mounting points...

Give your 2016-17 Camaro the wide body treatment with these Duraflex and Carbon Creations components. Choose the individual components to create your own look or get them all to achieve the complete wide body effect. This...

Reproduction of the original front center grill designed for use on all 1972-73 standard Camaro models. Manufactured in injection molded ABS to original OEM specifications for an authentic appearance and fit. Includes a...

This template kit allows easy door drilling for the critical clip locations on a 1967 Camaro Rally Sport model. Comes with easy to use, full size digitally rendered templates that exactly locate all the RS lower molding door...

Replace your dented, scratched or missing wheel opening molding with this reproduction molding from OER®. OER® reproduction wheel opening moldings are stamped to fit the vehicles contours perfectly and features the...

Reproduction of the original rear glass molding designed for use on 1967-69 Camaro and Firebird models. Installs on the passenger side back glass and meets the upper and lower molding. Each molding will install easily...

Add a little style to your Gen 5 Camaro with this high quality billet grill with a bright polished aluminum finish. This billet grill is designed as an overlay to the factory grill and is manufactured to uncompromising...

Add a little style to your Gen 5 Camaro with this high quality billet grill with a classy polished aluminum finish. This billet grill is designed to replace the factory grill and is manufactured to uncompromising standards...

This Restorer's Choice™ grill kit includes a Rally Sport grill and the upper and lower grill moldings. The upper molding includes the header panel to molding attachment clips. The moldings were originally riveted to...

Reproduction of the D-Shaped front windshield or back window molding clip for various 1967-72 GM models. Manufactured to factory specifications for proper fitment and function. Use as required. Sold individually. Replaces OE...

Finally, a true billet-aluminum grill to customize your 1967-68 Camaro Rally Sport. This high-quality, US-made grill set consist of two grill sections and a center trim plate with an SS logo, RS logo, or without a logo....

This template kit allows easy door drilling for the critical clip locations on a 1967 Camaro Rally Sport model. Comes with easy to use, full size digitally rendered templates that exactly locate all the RS lower molding door...

Billet aluminum grills for Camaro are manufactured with high standards and quality workmanship. Bolt-over design that require no modifications and takes only 30 minutes to install. These are the finest aftermarket grills on...

Reproduction of the original front upper grill molding designed for use on 1967-68 Camaro Rally Sport models (hidden headlight option). Each molding is stamped to factory specifications including correctly painted black trim...

GM Performance Parts molded, contoured splash guards add to the look of ground-hugging muscle while protecting your vehicle from mud, dirt, snow, salt and gravel. Fits 2010-13 models, but colors are year specific. Check paint...

Replace your center grill area with this Restorer's Choice™full grill kit that includes the entire grill section and the upper grill reinforcement which installs directly above the grill between the header panel and...

If you took one in the lower grill on the freeway, then replace it with this original GM lower grill. Available now for Camaro LS, LT or SS models. Note: Can be used on SS/LT models with RS package. Shipped oversize.

Replace your center grill area with this Restorer's Choice™ kit that includes the entire grill section and the upper grill reinforcement which installs directly above the grill between the header panel and grill. The...

Add a little style to your Gen 5 Camaro with this high quality billet grill. This billet grill is designed as an overlay to the factory grill and is manufactured to uncompromising standards for quality workmanship. The...

Reproduction of the original lower outer door molding designed for use on all 1968 Camaro models with the Rally Sport option. Installs on the lower section of the door between the front fender and the quarter panel on the...

Reproduction windshield and rear window molding steel clip set to fit a wide variety of GM makes and models. Each clip set will provide a snug fit for the molding being attached. The amount of clips required for the job will...

Reproduction outer door reveal molding for 1970-81 Camaro models. Manufactured to factory specifications in stamped aluminum featuring an original style finish and correct contours to fit the door. Officially Licensed GM...

This Restorer's Choice™ grill kit includes a Rally Sport grill, upper and lower grill moldings, and LH and RH headlamp bezels and moldings. The upper molding includes the header panel to molding attachment clips. The...