Chevrolet Camaro Parts - Moldings

This seven piece kit includes the moldings which extend from the rear ledge of the hood section around to the rear of the door. Kit includes: 1 Hood Ledge Molding 2 Upper Rear Fender Moldings 2 Outer Door Reve al Moldings 2...

The rear end of your Camaro could use some chrome. We suggest this chrome vinyl rear valance trim molding.

Replace worn out or damaged moldings with these quality reproductions. Reproduction of the original 1970-81 Camaro and Firebird window trim molding for use on vehicles with bright chrome drip rails. Manufactured from high...

Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....

Excellent quality reproduction molding that attaches directly to the rocker panel below the door, extending from the front wheel well to the rear wheel well. When only the best quality will do, we offer this OER® show...

Reproduction windshield and rear window molding steel clip set to fit a wide variety of GM makes and models. Each clip set will provide a snug fit for the molding being attached. The amount of clips required for the job will...

Produced in brightly polished aluminum, these reproduction wheel opening moldings will install and replace your originals exactly. These moldings were available from the factory as an exterior option for 1969 Camaro models. ...

Reproduction of the original rear hood ledge molding designed for use on 1970-81 Camaro models. Each hood molding is designed and manufactured to replicate the original in quality, fitment and appearance. Manufactured to...

Replacement molding installs between the door and the wheel opening section of the quarter panel. Fits both coupe and convertible models. Molding is white and must be painted to match exterior color of vehicle.

Reproduction of the front and rear window molding clip for various 1970-74 GM models. Manufactured to factory specifications for proper fitment and function. Popular models and applications are listed below, but may fit...

Reproduction of the original style chrome edge guards designed for use on 1970-81 Camaro and Firebird models. The chrome door edge guard moldings protect the vertical door edge of the door from nicks and scratches when...

Reproduction of the original outer upper windshield molding designed for use on 1967-69 Camaro and Firebird coupe models. Each molding is designed to replace the damaged or dinged original. Each molding is manufactured from...

Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....

Reproduction side molding set for 1982-92 F-Body models. Manufactured to factory specifications, featuring the correct end shape, and 3M backing for simple installation. Manufactured in black but can be painted to match....

OER®replacement rear window glass molding clip for various GM models as listed. Each clip is sold individually. Number of clips required may vary depending on the model. This steel clip measures 3/4" x 11/16". Sold...

Reproduction of the original molding clip designed for use on various GM models. These special clips are specifically used to install a variety of moldings including the applications listed below. Sold individually. Use as...

Produced in brightly polished aluminum, these reproduction wheel opening moldings will install and replace your originals exactly. These moldings were available from the factory as an exterior option for 1968 Camaro Rally...

Correct reproduction of the original chrome molding unit designed for use on 1970-81 Camaros that included the optional rear hood ledge chrome trim molding. Each molding is manufactured in quality aluminum replicating the...

Reproduction of the original stamped aluminum wheel opening molding designed for use on the front fender for 1969 Camaro models drivers side (LH). Replace your dented, scratched or missing wheel opening molding with this...

Reproduction of the original stamped aluminum wheel opening molding designed for use on the front fender for 1969 Camaro passenger side (RH). Replace your dented, scratched or missing wheel opening molding with this...

Correct reproduction of the original chrome molding unit designed for use on 1970-81 Camaros that included the optional rear hood ledge chrome trim molding. Each molding is manufactured in quality aluminum replicating the...

Reproduction of the original lower outer door molding designed for use on all 1968 Camaro models with the Rally Sport option. Installs on the lower section of the door between the front fender and the quarter panel on the...

Reproduction of the original door edge guard moldings designed for use with 1969 Camaro and Firebird models. The chrome door edge guard moldings protect the vertical door edge section from nicks and scratches when opening the...

Reproduction molding designed for use on all 1967 Camaro models with the Rally Sport option. Measures approximately 3" wide. Installs on the lower front fender panel section on the passenger side. Applications: 1967-1967...

Reproduction of the molding that attaches to the lower portion of the header panel to surround the grill on 1974-77 Type LT models. Each molding is manufactured from stamped aluminum to exact OEM specifications. Features a...

Replace your dented, scratched or missing wheel opening molding with this reproduction molding from OER®. OER® reproduction wheel opening moldings are stamped to fit the vehicles contours perfectly and features the...

This 3 piece kit includes the hood and fender edge moldings. Officially Licensed GM Restoration Part® Even if your Camaro wasn't originally equipped with the optional exterior molding p ackage, you can still...

Reproduction of the original style rectangular-shaped front and rear window molding clip designed for use with various 1965-72 Buick, Chevrolet, Oldsmobile, and Pontiac models. Manufactured to factory specifications for...

Reproduction molding designed for use on all 1967 Camaro models with the Rally Sport option. Approximately 3" wide. Installs on the lower section of the door between the front fender and the quarter panel on the passenger...

Excellent quality reproduction molding for 1976-81 Camaro and 1970-81 Firebird models. Molding attaches directly to the rocker panel below the door, extending from the front wheel well to the rear wheel well. 7/8" wide. Sold...

Replace your dented, scratched or missing wheel opening molding with this reproduction molding from OER®. OER® reproduction wheel opening moldings are stamped to fit the vehicles contours perfectly and features the...

Reproduction molding designed for use on all 1967 Camaro models with the Rally Sport option. Measures approximately 3" wide. Installs on the lower front fender panel section on the drivers side. Applications: 1967-1967...

Reproduction of the original roof drip molding designed for use on 1967-69 Camaro and Firebird models. Each molding is stamped in quality bright aluminum material matching the original in configuration and fitment. Will fit...

Reproduction molding designed for use on all 1968 Camaro models with the Rally Sport option. Installs on the lower section of the door between the front fender and the quarter panel on the drivers side. Approximately 3/4"...

Original GM lower door molding for 1978 Camaro Type LT models. Measures 7/8" wide.

Reproduction of the original vinyl top installation hardware designed for use on 1967-68 Camaro and 1967-69 Firebird models. Install your vinyl top moldings correctly with this complete hardware set that includes all of the...

Reproduction of the original windshield side molding designed for use with 1967-69 Camaro and Firebird convertible models. Each molding is manufactured in quality stamped aluminum to correct factory specifications. Windshield...

Reproduction of the original windshield side molding designed for use with 1967-69 Camaro and Firebird convertible models. Each molding is manufactured in quality stamped aluminum to correct factory specifications. Windshield...

Side moldings for 1993-02 F-Body models. Manufactured as an alternative to factory moldings, featuring front, and rear molded ends. Available molded in various colors as 2, 8' foot pieces that are cut to fit.

Replace your dented, scratched or missing wheel opening molding with this reproduction molding from OER®. OER® reproduction wheel opening moldings are stamped to fit the vehicles contours perfectly and features the...

Reproduction of the original roof drip pillar post moldings designed for use on 1967-69 Camaro and Firebird models. Each molding is a replication of the original manufactured in quality aluminum material that fits and...

Side moldings for 1993-02 F-Body models. Manufactured as an alternative to factory moldings, featuring front, and rear molded ends. Available molded in various colors as 2, 8' foot pieces that are cut to fit.

Reproduction of the original outer lower LH (drivers side) windshield molding designed for use on 1967-69 Camaro and Firebird coupe models. Each molding is designed to replace the damaged or dinged original. Each molding is...

Reproduction molding designed for use on all 1968 Camaro models with the Rally Sport option. Approximately 3/4" wide. Installs on the lower quarter panel section on the driver's side. This molding is the rear section of the...

Reproduction of the original style quarter window vertical chrome moldings designed for use with 1967-69 Camaro and Firebird models. Each molding is manufactured in high quality die-cast featuring a brightly polished chrome...

Reproduction molding designed for use on all 1967 Camaro models with the Rally Sport option. Measures approximately 3" wide. Installs on the lower quarter panel in front of the wheel opening on the passenger side. ...

Side moldings for 1993-02 F-Body models. Manufactured as an alternative to factory moldings, featuring front, and rear molded ends. Available molded in various colors as 2, 8' foot pieces that are cut to fit.

Reproduction of the original outer lower RH (passenger side) windshield molding designed for use on 1967-69 Camaro and Firebird coupe models. Each molding is designed to replace the damaged or dinged original. Each molding is...

Reproduction of the original upper rear glass molding designed for use on 1967-69 Camaro and Firebird coupe models. Installs on the upper rear glass. Each molding will install easily using original or reproduction clips. ...

OER® reproduction of the original lower windshield clips for 1967-69 Camaro and Firebird models which retain the lower moldings to the windshield. These clips are used in addition to the center molding clips. Includes one...

Reproduction of the original roof drip molding designed for use on 1967-69 Camaro and Firebird models. Each molding is stamped in quality bright aluminum material matching the original in configuration and fitment. Will fit...

Reproduction of the original roof drip moldings designed for use with 1970-81 Camaro and Firebird models. Each molding is manufactured in quality stainless steel to factory specifications replicating the original in design...

Reproduction of the original rear wheel opening moldings designed for use on 1967-68 Camaro and Firebird models. Replace the dented, scratched or missing wheel opening molding with this authentic reproduction. For use on...

Reproduction of the original convertible windshield molding designed for use on 1993-02 Camaro and Fierbird models. Manufactured to factory specifications featuring the correct black rubber material. This molding covers the...

Side moldings for 1993-02 F-Body models. Manufactured as an alternative to factory moldings, featuring front, and rear molded ends. Available molded in various colors as 2, 8' foot pieces that are cut to fit.

Reproduction of the original stamped aluminum front windshield molding set set designed for use on 1970-81 Camaro and Firebird models. Unlike other windshield moldings on the market, OER produces the only factory correct...

Protect your Camaro with original factory adhesive side moldings for your 3rd generation model. This molding is available on B84 standard models and BW2 deluxe models. This smooth surface, adhesive backed, dense hard rubber...

Reproduction molding designed for use on all 1967 Camaro models with the Rally Sport option. Measures approximately 3" wide. Installs on the lower quarter panel in front of the wheel opening on the drivers side. Installation...

Replace your dented, scratched or missing wheel opening molding with this reproduction molding from OER®. OER® reproduction wheel opening moldings are stamped to fit the vehicles contours perfectly and features the...