Chevrolet Camaro Parts - Rear End

Moser rear end cover for 12 bolt rear ends. Semi Gloss Black to make your rear end look amazing

If you have annoying vibrations and noise, you may need to replace your driveshaft universal joints. Restore smooth operation of your drivetrain with high quality replacement U-Joints, complete with clips or snap rings for...

If you?re looking for extreme traction, Classic Industries® has got it all locked up! This new positive-locking differential is a breakthrough in differential technology, delivering the most traction possible while still...

This Currie 9 Plus 3rd member is ready to install in your 9" rear end. Detroit Locker is a 100%-automatic locking differential that provides ultimate traction for mild to extreme vehicle applications. During straight-line...

Aftermarket replacement now available for 10 bolt models. The shim kit includes the correct size pinion shims for 10 bolt applications. Applications: Buick models: 1973-75 Apollo 1973-77 Century 1973-81 Electra 1985-89...

Moser Engineering offers the best aftermarket 12 Bolt on the market. The 12 Bolt housings are newly cast nodular iron housing units that are direct replacements for leaf-spring General Motors OE applications. The extremely...

A crush sleeve is designed to prevent your pinion bearings from being preloaded too tightly and prevent the pinion nut from loosening up. Fits models with 10 bolt / 8.5" ring gear. Applications: Buick models: 1973-75...

This is a highly polished reproduction of the original 10 bolt rear end cover for use models with 10 bolt rear axles. Gasket sold separately. Applications: 1982-92 Camaro 1982-92 Firebird 1982-96 Chevrolet / GMC S10/S15...

Replace your worn out or broken ring and pinion gears with new components from Motive Gear. Includes matched ring and pinion gears. 1.376" pinion diameter, 26 spline. Case sizes; 3.73 and numerically lower, 3.92 and...

This Currie 9 Plus 3rd member is ready to install in your 9" rear end. Traction Lock is the same as Posi-traction or limited-slip. It uses heavy plate-style clutches to help your traction and put power to the ground. 3rd...

This dress-up differential cover bolt set features a 350 logo stamped directly onto the head of the stainless steel bolt. Perfect for stock or chrome covers. What better way to make a statement than with these unique...

Prevent premature bearing or brake failure! Replace aging, cracked or deteriorated rear axle seals to keep gear oil and grease in the axle tube where it belongs. Fits all models 1985-91 RH with 7.75" ring gear.

Installation kit for 8.6" Richmond Gear sets Part Numbers RG4901871, RG6904921 and RG6904931 for Gen5 Camaro models with V8 engines. Note: Classic Industries recommends professional installation. All ring and pinion sets...

If you?re looking for extreme traction, Classic Industries® has got it all locked up! This new positive-locking differential is a breakthrough in differential technology, delivering the most traction possible while still...

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No...

Moser Engineering offers the best aftermarket 12 Bolt on the market. The 12 Bolt housings are newly cast nodular iron housing units that are direct replacements for leaf-spring General Motors OE applications. The extremely...

Moser Engineering offers the best aftermarket 12 Bolt on the market. The 12 Bolt housings are newly cast nodular iron housing units that are direct replacements for leaf-spring General Motors OE applications. The extremely...

This differential cross shaft is for certain high numeric ratio gear sets that require special notched cross pins for proper installation. This particular cross shaft is for use with 12-bolt lock right differentials that are...

Specifically designed to fit 1993-2002 models. Easy bolt-on installation requires no modifications. Both NHRA and IHRA legal. Manufactured from 1/4" thick 2" wide zinc plated steel. Complete with mounting hardware and...

Auburn Gear's High Performance Series limited-slip differentials outperform standard OEM differentials hands down. They deliver more traction and faster engagement for controlled power transfer and lightning fast reaction to...

Reproduction of the original rear axle bumper and bracket designed for use on 1968-69 Camaro and Firebird models. This bumper is necessary to keep the your rear axle from hitting the rear frame rails when the rear suspension...

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No...

Engineered to accept all 9", Ford-style differentials, each FAB9™ includes a fully-welded center section with internal gussets, 3" axle tubes, and Ford big-bearing, late-model Torino housing ends. All housings are...

Moser Engineering offers the best aftermarket 12 Bolt on the market. The 12 Bolt housings are newly cast nodular iron housing units that are direct replacements for leaf-spring General Motors OE applications. The extremely...

This dress-up differential cover bolt set features a SS logo stamped directly onto the head of the stainless steel bolt. Perfect for stock or chrome covers. What better way to make a statement than with these unique bolts?

Includes 12 bolt, 8 7/8" ring gear and pinion includes ring and pinion only (not a kit). For a complete assembly also purchase 12 bolt ring and pinion shim kit, 12 bolt bearing kit and 12 bolt installation kit. Important:...

This package includes all the parts needed to connect the stock early steering column to the Chassisworks manual rack and pinion. Kit includes: GM rag joint flange adapter-to-DD-shaft U-joint Collapsible intermediate s haft...

Turn your Camaro or Z/28 into a true autocross monster when you toss that ancient and inferior live axle for the performance handling and comfort only offered by independent rear suspension. If you really want to go fast and...

This dress-up differential cover bolt set features a SS logo stamped directly onto the head of the chrome plated bolts. Perfect for stock or chrome covers. What better way to make a statement than with these unique bolts?

Planning to drag race your 2010-15 Camaro SS?? Then you may need some additional safety equipment depending on how quick your ET is. NHRA rules mandate if the vehicle runs 11.49 or quicker, one is required. Metco motorsports...

Reproduction positraction differential fill plug for vehicles equipped with either a 10 bolt or 12 bolt positraction differential. Available in either 3/4" or 1" plugs.

This is the same housing used in the complete axle assembly. Available with mono or multi leaf spring perches installed, or bare, to use in a custom rear suspension set-up. The 12 Bolt housings are newly cast nodular iron...

Engineered to accept all 9", Ford-style differentials, each FAB9™ includes a fully-welded center section with internal gussets, 3" axle tubes, and Ford big-bearing, late-model Torino housing ends. All housings are...

Enhance the appearance of you GM 10 or 12-bolt rear end with ARP's stainless steel rear cover bolts. These bolts add a lustrous contrast to a painted OEM cover, compliment a chrome plated aftermarket version or add flash to...

This Currie 9 Plus 3rd member is ready to install in your 9" rear end. Detroit Locker is a 100%-automatic locking differential that provides ultimate traction for mild to extreme vehicle applications. During straight-line...

Special plated bolts to complete the installation of your chrome rear end cover. Fits both 10 or 12 bolt covers. Sold as a set of 12.

Replace your worn out or broken ring and pinion gears with new components from Motive Gear®. Master sets includes: Ring and Pinion gears Pinion Bearings Seal, Crush Sleeve and Nut Carrier Bearings Shim Kit Ring Gear Bolts...

Reproduction of the original rear axle bumper which attaches to the body and helps keeps the rear axle from bottoming out. Manufactured using hard rubber material with molded in stud for mounting. Sold individually. 2...

Stock replacement driveshaft delivers power, consuming some of it in the process. A new aluminum shaft from Inland Empire Drive Line Service will reduce power loss and run smoother than the mass production, aging original...

Auburn Gear's High Performance Series limited-slip differentials outperform standard OEM differentials hands down. They deliver more traction and faster engagement for controlled power transfer and lightning fast reaction to...

Auburn Gear's High Performance Series limited-slip differentials outperform standard OEM differentials hands down. They deliver more traction and faster engagement for controlled power transfer and lightning fast reaction to...

Eliminate those pesky leaks that 9" Ford housings are known for. This breather vent for hose is for use with the breather tank (sold separately). Made in USA Note: Special order, must be prepaid. Non-returnable....

If you?re not looking for a complete 12 Bolt and feel like tackling your own differential setup, try this housing and axle package. Package includes: All new Moser cast nodular 12-bolt housing Heavy duty 1/2" bearing cap...

These housings are designed and built to go into your muscle car with a minimal amount of effort. It is set-up with the Aftermarket Brake Configuration Standard which is: 2.5" brake space with late-model big Ford housing...

Engineered to accept all 9", Ford-style differentials, each FAB9™ includes a fully-welded center section with internal gussets, 3" axle tubes, and Ford big-bearing, late-model Torino housing ends. All housings are...

These grade 8 press-in Moser wheels studs are designed for rear axles with drum brakes. These are a great addition when installing Moser axles on your Camaro or just replacing your old wheel studs. Sold as a set of 10. ...

Moser Engineering offers the best aftermarket 12 Bolt on the market. The 12 Bolt housings are newly cast nodular iron housing units that are direct replacements for leaf-spring General Motors OE applications. The extremely...

Moser Engineering offers the best aftermarket 12 Bolt on the market. The 12 Bolt housings are newly cast nodular iron housing units that are direct replacements for leaf-spring General Motors OE applications. The extremely...

If you?re looking for extreme traction, Classic Industries® has got it all locked up! This new positive-locking differential is a breakthrough in differential technology, delivering the most traction possible while still...

Set includes: Pinion-carrier shims Pinion nut Ring gear bolts Gear marking compound Pinion seal Crush sleeve Brush Gasket (or RTV silicone) Note: Pictured with gasket. Set may include a gasket or RTV silicone. ...

This steel GM/GMC U-joint U-bolt fits several different General Motors automobiles. The size of the U-joint U-bolt is 5/16-inch (-18) by 1 and 13/16 inches by 1.41 inches. The U-joint U-bolt weighs one pound and ships via...

Used by Joe Gibbs Racing in every rear end differential and transmission gear box. This fully synthetic, unique SAE 75W-110 gear oil reduces operating temperatures by up to 15 degrees compared to other brand gear oils.

Moser Engineering offers the best aftermarket 12 Bolt on the market. The 12 Bolt housings are newly cast nodular iron housing units that are direct replacements for leaf-spring General Motors OE applications. The extremely...

ECTED: Electronically Controlled Traction Enhancing Differential (pronounced "ek-ted") The ECTED Max™ is a revolutionary traction-technology product that switches between limited-slip and locker mode on the fly. When...

This Currie 9 Plus 3rd member is ready to install in your 9" rear end. Detroit Locker is a 100%-automatic locking differential that provides ultimate traction for mild to extreme vehicle applications. During straight-line...

Correct plug which is removed when draining or filling the rear axle or transmission lubricant.

This Currie 9 Plus 3rd member is ready to install in your 9" rear end. Detroit Locker is a 100%-automatic locking differential that provides ultimate traction for mild to extreme vehicle applications. During straight-line...

Our improved C-Clip Eliminators eliminates the factory C-clip axle retention and provides a safety hub with sealed, press-on bearings. Now with an extra internal seal to help prevent leakage. The C-Clip Eliminators are...