Chevrolet Camaro Parts - Axle Shafts & Parts

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No...

Reproduction of the original rear axle bumper and bracket designed for use on 1968-69 Camaro and Firebird models. This bumper is necessary to keep the your rear axle from hitting the rear frame rails when the rear suspension...

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No...

Reproduction of the original rear axle bumper which attaches to the body and helps keeps the rear axle from bottoming out. Manufactured using hard rubber material with molded in stud for mounting. Sold individually. 2...

These housings are designed and built to go into your muscle car with a minimal amount of effort. It is set-up with the Aftermarket Brake Configuration Standard which is: 2.5" brake space with late-model big Ford housing...

These grade 8 press-in Moser wheels studs are designed for rear axles with drum brakes. These are a great addition when installing Moser axles on your Camaro or just replacing your old wheel studs. Sold as a set of 10. ...

Correct plug which is removed when draining or filling the rear axle or transmission lubricant.

Our improved C-Clip Eliminators eliminates the factory C-clip axle retention and provides a safety hub with sealed, press-on bearings. Now with an extra internal seal to help prevent leakage. The C-Clip Eliminators are...

Moser offers forged steel street axles for 12 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No...

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No...

These housings are designed and built to go into your muscle car with a minimal amount of effort. It is set-up with the Aftermarket Brake Configuration Standard which is: 2.5" brake space with late-model big Ford housing...

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No...

Prevent premature bearing or brake failure! Replace cracked or deteriorated rear axle seals to keep gear oil and grease in the axle tube, where it belongs. Sold individually. 2 required per vehicle. Applications: 1967-86...

These grade 8 press-in Moser wheels studs are designed for rear axles with disc brakes. These are a great addition when installing Moser axles on your vehicle or just replacing your old wheel studs. Sold as a set of 10. One...

Moser offers forged steel street axles for 12 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No...

These housings are designed and built to go into your muscle car with a minimal amount of effort. It is set-up with the Aftermarket Brake Configuration Standard which is: 2.5" brake space with late-model big Ford housing...

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No...

Reproduction of the original rear axle bumper and bracket designed for use on 1968-69 Camaro and Firebird models. This bumper is necessary to keep the your rear axle from hitting the rear frame rails when the rear suspension...

Reproduction of the original rear axle bumper and bracket designed for use on 1968-69 Camaro and Firebird models. This bumper is necessary to keep the your rear axle from hitting the rear frame rails when the rear suspension...

Classic Industries® offers this sealed repair bearing that will replace the rear axle bearing on your classic when damage has occurred to the axle shaft from a worn-out bearing. This bearing is a sealed, self-contained,...

OER® reproduction of the ventilator used by GM on a multitude of applications from the 1950s thru todays cars and trucks including the rear axle housing, automatic transmissions. front transfer case on 4 x 4 models and...

Original GM rear axle bearing for use with 10 bolt rear ends. Always check the bearings whenever removing the axles. Applications: 1967-86 Camaro all 1967-86 Firebird all 1965 Impala / full size 10 bolt 1977-81 Impala /...

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No...

Reproduction is designed to replace the original rear axle bumper on all 1967 models. Sold individually. 2 required per vehicle.

Prevent costly damage by replacing rear axle bearings before they seize with this premium replacement rear axle bearing. Always check the bearings and seals whenever removing the rear drums/axle for signs of wear. Sold...

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No...

If you have installed an aftermarket driveshaft in your 2010-2015 Camaro SS, the front universal joint is moved rearward, away from the transmission tailshaft. The Metco Motorsports driveshaft safety loop kit (part number...

Original replacement locks for applications below. Fits 1967-81 with .150 horseshoe.

This is a bracket, brake pressure modulator valve, for Chevrolet and Pontiac automobiles. It's a genuine GM replacement part with an OEM part number of 10287204. The bracket, brake pressure modulator valve is constructed of...

Original GM rear axle ventilator for various 1971-2002 models. Installs in 7/16" diameter hole. Buick applications: 1973-75 Apollo 1971-73 Centurion 1973-81 Century 1971-84 Electra 1971-72 Estate Wagon 1976-96 Estate Wagon...

Replace your bent or broken axle shafts with high quality original GM axles. This axle is 30-5/32" overall length with 28 splines for an 8.5", 10-bolt axle housings. Will replace the RH or LH axle. Wheel studs or bearing not...

Replace your bent or broken axle shafts with high quality original GM axles. This axle is 30-5/32" overall length with 28 splines for an 8.5", 10-bolt axle housings. Will replace the RH or LH axle. Wheel studs or bearing not...

Replace your bent or broken axle shafts with high quality original GM axles. This axle is 30-5/32" overall length with 28 splines for an 8.5", 10-bolt axle housings. Will replace the RH or LH axle. Wheel studs or bearing not...

Replace your bent or broken axle shafts with high quality original GM axles. This axle is 30-5/32" overall length with 28 splines for an 8.5", 10-bolt axle housings. Will replace the RH or LH axle. Wheel studs or bearing not...

This 1970-1972 Camaro/Nova/Oldsmobile F85 12-Bolt Axle Spacer is a genuine GM replacement part. The corresponding GM part number is 3954480. The approximate measurements of this spacer are: overall length 2.341". The small...

Reproduction of the original rear axle bumper designed for use on 1968-69 Camaro and Firebird models. Correct replacement bumper for use with 1968-69 rear axle bumpers. This bumper is necessary to keep the your rear axle from...

These housings are designed and built to go into your muscle car with a minimal amount of effort. It is set-up with the Aftermarket Brake Configuration Standard which is: 2.5" brake space with late-model big Ford housing...

Our improved C-Clip Eliminators eliminates the factory C-clip axle retention and provides a safety hub with sealed, press-on bearings. Now with an extra internal seal to help prevent leakage. The C-Clip Eliminators are...

Prevent costly damage by replacing rear axle bearings before they seize! Always check the bearings and seals whenever removing the rear drums for signs of wear. Sold individually. 2 required per vehicle. Note: ...

Moser offers forged steel street axles for 10 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Sold as a pair. Made in USA Note: No...