Chevrolet Camaro Parts - Tools

If you need a foolproof method to align your clutch, try this great clutch replacement tool. Includes one tool with seven adaptors to replace virtually any kind of automotive clutch.

If you make numbers of plug wires or do a lot of custom wiring, the new Pro-Crimp tool is a must for your toolbox. The Pro-Crimp features interchangeable jaws allowing for a variety of different style crimps with one heavy...

Essential tool for bolts with tight clearance like spark plugs and header bolts! 12-point for maximum finger traction. Set of three including 1/4" x 1/4", 1/4" x 3/8", 3/8" x 3/8" (12 pt x socket drive size). These belong in...

This OER® manufactured tool is designed to easily remove the guide plate nut on door or quarter window glass. Fits most models 1968-77. Note: Nut not included.

If you?ve ever tried removing a door hinge bushing with just a regular punch, you know it?s a hassle. Luckily, now there?s the specially designed Door Bushing Tool. Its special design makes it easy to punch out bushings and...

Convenient 1.68 oz. tube is ideal for all Blair hole cutters. Softer than standard stick lubricants, it provides superior adhesion to the tool and can be used in place of cutting fluids on ferrous and nonferrous metals to...

When you don?t have a lot of holes to make, Blaircutters™ provide fast, accurate holes in materials up to 3/16" thick. Blaircutters™ are annular cutting tools that cut around the edge of the hole and eject the...

Replacing OEM bushings and dont have a press? No problem! This new tool allows you to remove and install bushings with simple hand tools. Includes necessary hardware to remove upper and lower control arm bushings.

The sharp steel blades on this tool will remove corrosion and put the correct angle on terminal ends and posts. Use the 6 bladed tapered reamer to quickly clean terminal clamps. The post cleaners are marked positive and...

If your brake lines or fuel lines need to be flared, this is the right tool for you. This set allows the user to make single or double SAE flares to exact dimensions.

This set contains everything needed to install new cam bearings. Includes an arbor with drive mount, 2 drive spools, 2 spool stabilizers, and a drive cap.

No matter what the size of your battery cable job, this is the tool that will make quick work of it. By simply selecting the proper size to match your crimp and aligning the star with the battery lug in your vise, you will...

Unique tool designed to remove moldings and fasteners from interior panels. Can be used for all years.

Use this shock inflation tool to further adjust your air pressure inside the body of the shock. Detroit Speed recommends a range of 50 - 250 psi for DSE/JRi shocks. Note: No further discounts apply.

When it comes to adjusting the door hinges so they accurately align with the body of the car, you might find most novice restorers frustrated. You can now easily adjust the hinges without the aggravation of trying to align by...

Used for F-type terminals included in Classic Update and universal harnesses. Wire sizes ranging from 10 gauge to 18 gauge, or terminals requiring a two wire connection.

This Combination and Proportioning Valve Bleed Tool is designed to simplify the brake bleeding process by eliminating the need to remove the low pressure switch. Simply replace the warning light swtich (white plug) with this...

Make removing the rocker studs easier by using this special tool designed for not only removing rocker studs, but aligning as well.

Easily disconnect fuel injection quick connect fuel lines in hard-to-reach locations. 3/8" adapters work on GM fuel lines. 5/16" adapters work on Ford and Chrysler applications.

Replacement pilot for use Blair cutters.

Holcutters are not hole saws. They are precision ground, heat treated tools that easily cut through the stock rather than ripping, tearing, and pushing thru as do typical hole saws. They can produce holes 3 times faster and...

Excellent tool used to remove the molding from the retaining clips on windshield and back window glass. This tool helps to remove the moldings while protecting them from damage. Useful when you are replacing the glass or...

Repairs made in half the time with absolutely no stretching or distortion of material. Makes a perfect joint even through underbody deadener, in sculptured contours and high crowns. No need to remove parts of the vehicle -...

This tool is for models with a smooth antenna nut and 2 notches on the bottom. Allows you to remove or install your antenna without damaging the nut on your classic.

Dynamats hardwood roller aids in the installation of Dynamat products by firmly rolling out bubbles and creases. It also helps to stretch and form Dynamat pressing it into all crevices and shaping it to the areas it is...

For use with Part # 11122 arbor. Made in USA

For use with Part # 11123 arbor. Made in USA

For use with Part # 11007 arbor. Made in USA

Protect the headlight and washer nuts on your dash by removing them with the right tool! Removing or installing the headlamp or wiper switch bezel nut is on of thos jobs that required a special tool. This switch nut tool tool...

The DSE adjusting tool is used for adjusting your ride height on DSE suspension applications when using DSE coil-over shocks. Made in USA Also requires part # D31060 adjusting tool (sold separately) when using DSE...

This is a handy tool is perfect when removing the fuel tank sending unit lock ring. Eliminate damage that could occur when removing the lock ring with this handy tool. Features a plastic grip handle. For use on many early...

Checks angles from 0 to 90 degrees. Accurate to 0.5 degrees. Magnetically attaches for easier reading. This is a must tool when determining pinion angle when installing new rear suspension parts. Made in the U.S.A.

This special tool is designed specifically to interlock with the three recessed dimples on the outside edge of the ignition bezel nut. This tool will allow the removal or installation of the chrome ignition switch bezel...

Fits cutter sizes 3/8" to 3/4". Includes skip proof pilot drill with washer and is for use with 3/8" or larger drill chucks. Made in USA

Fits cutter sizes 13/16" - 1-1/2". Includes standard pilot pin and is for use with 1/2" or larger drill chucks. Made in USA

Fits cutter sizes 3/8" to 3/4". Includes standard pilot pin with washer and is for use with 3/8" or larger drill chucks. Made in USA

When you don?t have a lot of holes to make, Blaircutters™ provide fast, accurate holes in materials up to 3/16" thick. Blaircutters™ are annular cutting tools that cut around the edge of the hole and eject the...

For precision hole making in sheet metal and frame materials up to 1/2" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Made in USA ...

Holcutter™ is not hole saw. It is precision ground, heat treated tool that easily cuts through the stock rather than ripping, tearing, and pushing thru as do typical hole saws. The Holecutter™ can produce holes 3...

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Made in USA ...

This Rotabroach® set is for cutting access holes, fabrication, removing spot welds and body work. Rotabroach® Cutters are for precision hole making in sheet metal, frame materials, and plate stock up to 1/2" thick,...

Holcutter™ is not hole saw. It is precision ground, heat treated tool that easily cuts through the stock rather than ripping, tearing, and pushing thru as do typical hole saws. The Holecutter™ can produce holes 3...

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Made in USA ...

Holcutter™ is not hole saw. It is precision ground, heat treated tool that easily cuts through the stock rather than ripping, tearing, and pushing thru as do typical hole saws. The Holecutter™ can produce holes 3...

For precision hole making in sheet metal and frame materials up to 1/2" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Made in USA ...

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Made in USA ...

Holcutter™ is not hole saw. It is precision ground, heat treated tool that easily cuts through the stock rather than ripping, tearing, and pushing thru as do typical hole saws. The Holecutter™ can produce holes 3...

Holcutter™ is not hole saw. It is precision ground, heat treated tool that easily cuts through the stock rather than ripping, tearing, and pushing thru as do typical hole saws. The Holecutter™ can produce holes 3...

For precision hole making in sheet metal and frame materials up to 1/2" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Made in USA ...

Holcutter™ is not hole saw. It is precision ground, heat treated tool that easily cuts through the stock rather than ripping, tearing, and pushing thru as do typical hole saws. The Holecutter™ can produce holes 3...

For precision hole making in sheet metal and frame materials up to 1/2" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Made in USA ...

For precision hole making in sheet metal and frame materials up to 1/2" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Made in USA ...

Holcutter™ is not hole saw. It is precision ground, heat treated tool that easily cuts through the stock rather than ripping, tearing, and pushing thru as do typical hole saws. The Holecutter™ can produce holes 3...

This Rotabroach® set is for rustproofing and cutting access holes. Rotabroach® Cutters are for precision holemaking in sheet metal, frame materials, and plate stock up to 1/2" thick, whether Mild Steel, Stainless...

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Made in USA ...

When you don?t have a lot of holes to make, Blaircutters™ provide fast, accurate holes in materials up to 3/16" thick. Blaircutters™ are annular cutting tools that cut around the edge of the hole and eject the...

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Made in USA ...

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Made in USA ...

For precision hole making in sheet metal and frame materials up to 1/4" thick, Rotabroach® annular cutters make clean, burr-free, round holes with no deforming of stock or damage to the surrounding material. Made in USA ...

Holcutter™ is not hole saw. It is precision ground, heat treated tool that easily cuts through the stock rather than ripping, tearing, and pushing thru as do typical hole saws. The Holecutter™ can produce holes 3...