Chevrolet Camaro Parts - Body Gaskets & Seals

Precisions's weatherstrip lubricant significantly reduces friction, thereby reducing the installation force required to assemble parts and fittings. This is a non residue lubricant, once it dries it becomes invisible.

Correct staple to install fender skirt splash aprons for various models. 1/2" wide, 1/2" deep.

Reproduction of the original fender skirt rubber seal designed for use on various 1955-76 Chevrolet models. Manufactured to correct dimensions from quality EDPM rubber that replicates the original in fitment an appearance....

Reproduction of the original side marker lens gaskets used to seal the side marker assembly to the body. Each gasket is stamped with a steel rule die insuring an exact fitment. Gaskets are sold in pairs. Applications:...

A complete set of reproduction gaskets designed for use on 1967 Camaro models. Each gasket is a replication of the original and replaces the outer body gaskets for the door handles, rear tail lights, outer mirror gasket,...

If you're repainting your 1970-73 Camaro or replacing the rear bumper, you'll want to replace the bumper end gaskets. These gaskets are installed between the upper edge of the bumper ends and the rear body panel.

Correct reproduction of the original power window harness rubber boots which is used to house the power window wiring harness as it passes between the door jamb and door area. This rubber boot is manufactured in durable...

Reproduction of the original top door seals designed for use on 1993-02 Camaro and Firebird models. Manufactured to factory specifications featuring the original shape and size. These front door seals mount to the top front...

Correct reproduction of the original molded rubber U-seal that attaches to the door jamb section directly below the rear side window vertical weatherstrip. This reproduction is manufactured to factory specifications which...

Reproduction of the original hood louver gaskets that seals the hood louvers to the hood. These special gaskets are manufactured to precisely replace the old or worn originals. Prevents water and other elements from seeping...

Reproduction tail lamp-to-quarter panel filler weatherstrip seal set for 1982-92 Chevrolet Camaro. Each set of hockey stick shaped molded rubber fillers fill the gap between the quarter panel and the tail lamp lens on both...

Reproduction of the original inner and outer horizontal window felt glass run weatherstrip for use on 1993-02 Camaro and Firebird models. Each windowfelt weatherstrip is manufactured and designed to replace the original and...

Reproduction of the original rubber mounting / insulation grommet used on various GM vehicles with the optional power top. These rubber grommets install on the pump assembly and secure it to the vehicle while creating a...

This reproduction door handle and door lock gasket set includes a complete set of door handle gaskets and door lock gaskets used to install the outer door handles and door locks on the various models listed below. Each set...

1962-72 GM Full Size Vehicle Door drain hole seal. Replaces GM# 7789247. Applications 1967-72 Chevrolet Caprice 4-door Hardtop 1967-68 Chevrolet Caprice 4-door Wagon, 2 & 3 seat 1969-69 Chevrolet Caprice Kingswood Estate...

Reproduction core support to radiator seals for 1968-69 F-Body models equipped with AC. These seals install between the top of the radiator and the core support.

Reproduction of the front header weatherstrip designed as a repair part for 1967-69 Camaro and Firebird convertible models. Each header weatherstrip set is available in a 3 piece configuration for "glue-in" installation, and...

Reproduction of the original weatherstrip seal that fits onto the bottom of the door and acts as an auxiliary weatherstrip protecting water or elements from entering the passenger area. The door frame weatherstrip works in...

Reproduction fender to side cowl seals for 1970-81 models. These masticated rubber seals are installed vertically between the rear side of the fenders and the side cowl panels. Sold as a pair. Includes mounting hardware. ...

Reproduction of the original door handle gasket designed for use on various 1970-88 GM models. This gasket inserts on the back of the outer door handle and acts as protection between the handle and the paint. Sold...

A complete set of reproduction gaskets designed for use on 1968 Camaro models. Each set designed to replace the gaskets for the outer door handles, tail light lenses, side markers, mirror gasket, antenna base, door lock...

Reproduction of the original rear rocker panel flaps for use on various GM models from 1955-1972. Once installed, these flaps will help prevent road splash and debris from entering and blocking the rocker panel drain area....

Quality reproduction of the original pillar post weatherstrip designed for use on 1967 Camaro and Firebird convertible models. Each weatherstrip is manufactured from durable E.P.D.M weatherstrip for authenticity and fit. This...

Reproduction of the spring steel door jamb windlace retaining clips for 1968-69 Camaro, and 1968-69 Firebird models. These clips are a direct replacement for the commonly damaged or missing originals. Sold in pairs. 1 pair...

Replacement fender splash guard retainer designed for use with most GM models that container fender splash guards. Retainers and manufactured using black nylon material for versatility and strength. Sold individually. Use as...

Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...

Reproduction of the original trunk weatherstrip gutters designed for use on 1970-81 Camaro and Firebird models. Manufactured in quality aluminum to OE specifications. This 2 piece trunk gutter is designed to hold the trunk...

Reproduction of the original side marker lens gaskets designed to seal the side marker lenses. Each gasket is stamped correctly using a steel rule die insuring an exact fitment. Sold in a set of 4 gaskets. Applications:...

Reproduction of the outer beltline moldings that mount on the RH or LH doors that sweep the outside of the glass when rolled up or down. These horizontal glass run weatherstrips attach to the outer lower section of the door. ...

Reproduction of the original bottom door seals designed for use on 1993-02 Camaro and Firebird models. Manufactured to factory specifications featuring the original shape and 3M adhesive backing for easy installation. These...

OER® reproduction of the original console seal cover originally installed on 1967 Camaro, 1967 Firebird or 1968-72 Chevy II/Nova models with a factory 3 or 4-speed manual transmission. Each seal is manufactured to exact...

This reproduction gasket set includes a complete set of door handle gaskets used to install the outer door handles on the various models listed below. Each set includes correct die-cut gaskets for both RH and LH outer door...

Reproduction of the original firewall grommet designed for use with 1968-69 Camaro models with the Rally Sport hidden headlight option. Manufactured in quality EPDM rubber replicating the original in design and fitment. This...

Reproduction of the original style side hood rubber bumper designed for use various GM models. Over time, the rubber stoppers on your hood can wear out or deteriorate. These reproduction stoppers will help keep your hood...

Supplimental paint seal set designed for use on 1967-68 Camaro Rally Sport models. Set includes the front park lamp to body gaskets and back-up lamp to body gaskets. Each gasket replicates the original design for an authentic...

Reproduction of the original inner splash apron set designed for use on 1969 Camaros. The splash shields are important in maintaining the seal between the fender skirt and engine bay. Replace the old and worn out splash...

A complete set of reproduction exterior gaskets designed for use on 1969 standard or RS Camaro models. Each set is designed to replace the gaskets for the door handles, tail lights, back-up lights, side markers, mirror...

Reproduction of the original inner splash apron set designed for use on 1967-68 Camaros. The splash shields are important in maintaining the seal between the fender skirt and engine bay. Replace the old and worn out splash...

Reproduction of the original style components required to replace and mount the outer door mirror on the door. Contains all the necessary hardware to install a standard outer door mirror onto either the drivers or passenger...

Reproduction of the original door lock gasket designed for use on various GM models including the listings below. After repainting your doors, or whenever replacing door locks, be sure to install new lock cylinder gaskets to...

Reproduction die-cut trunk lock cylinder gasket designed to seal the trunk lock cylinder to the body. This gasket is designed for use on the listings below. Each gasket will fit and function as original. This is a non-molded...

Quality reproduction of the original outer door mirror gasket designed for use on various GM models. Manufactured to factory specifications in quality injection molded ABS, will fit original GM or reproduction mirrors....

High quality reproduction of the original Hurst style T-top weatherstrip designed for 1978 Camaro and 1976-78 Firebird models. This weatherstrip was installed on 1976 to 1st design 1978 models. Manufactured from molded and...

Replace the old splash aprons with this quality reproduction and keep your engine compartment clean and free of water, salt, and other road debris. Each splash apron set is designed to fit as original ensuring a complete seal...

This door handle O-ring is one of the most overlooked replacement parts on any vehicle. The O-ring inserts onto the outer door handle push button and eliminates rattling and wear between the handle and the push button....

Reproduction of the original trunk lock cylinder gasket designed for use on various GM models. This gasket is used to seal the trunk lock cylinder to the body. Manufactured in quality EPDM molded rubber that replicates the...

OER® reproduction of the original die-cut felt seals that slips over the bellcrank pivot studs and seals against the end of the bellcrank tube to prevent dirt and water damage. Manufactured to correct dimensions. Sold in...

This OER® reproduction of the original upper push rod molded rubber boot is manufactured using correct E.D.P.M. rubber compound stock that is superior to the original. Molded in steel insert distributes mounting screw...

Reproduction of the original tail lamp gasket designed for use on all 1978-81 Camaro models. The gasket is manufactured in molded rubber ensuring a quality replacement. The gasket acts as a cushion between the tail light...

Correct molded reproduction of the original vent frame weatherstripping designed for use on 1967 Camaro and Firebird models. Designed and manufactured to exact factory specifications, each weatherstrip will replace the...

Correct reproduction of the original outer door bullet mirror gasket designed for use on various GM models. This gasket separates the mirror base from the outer door metal. For use with bullet style mirrors in the various...

Correct reproduction of the original standard outer door mirror gasket originally installed on all 1970-81 models with chrome mirrors. Manufactured in injection molded ABS to factory specifications. Fits left or right hand...

Reproduction of the original door actuator rubber boot designed for use on 1968-69 Camaros with concealed headlamps. This rubber boot is designed to protect the vacuum actuator assembly. 2 required per vehicle. Applications...

Reproduction of the original AC hose grommet designed for use on 1967-68 GM models. Located on the RH front fender well, this hose grommet insulates the AC hoses from the condensor to the engine compartment. Manufactured in...

OER® reproduction of original evaporator case drain hose that attaches to the bottom portion of the evaporator core outlet case on various 1966-70 GM models originally equipped with air conditioning. Each drain hose is...

Reproduction of the original outer door remote mirror mounting gasket for use with the various applications listed. Each gasket is manufactured to replicate the original is fitment and design. Can be used with the original...

Reproduction of the original license plate / fuel door stoppers used for the rear license bracket. These are OE type reproductions manufactured to exact OE specifications. Sold in pairs. 9/16" diameter, 13/16" tall. GM Note:...

Reproduction of the original heater pipe grommet for use on vehicles original equipped with air conditioning. Each grommet is manufactured to replicate the original in quality and design. Features a rubber outer body with a...

Correct reproduction of the original style weatherstripping which attaches to the cowl top vent grill and seals the area between the hood and the cowl panel. This is a correct reproduction of the original seal that includes...

Quality reproduction of the original speedometer cable firewall grommet designed for use on various 1962-70 GM models. This grommet is manufactured to replicate the original in every detail. Installs where the speedometer...