Product#: K919

1967-2004 Buick, Chevy, Oldsmobile, Pontiac; Accelerator Pedal; Various GM Models

1976-1976 Chevrolet Pickup Truck (C/K Series) (1st Design) 1971-1972 Chevrolet Blazer 1976-1976 Chevrolet Blazer (1st Design) 1979-1984 Chevrolet G10, G20, G30 Series Van 1979-1984 Chevrolet P10, P20, P30 Series Van ...

Product#: FT3002C

1957 Chevy Bel Air, 150, 210; Fuel Tank; without Vent Tube; with Round Corners; Stainless Steel; 16 Gallon Capacity; Except Nomad, Station Wagon Models

Correct reproduction of the original fuel tank designed for with 1957 Chevrolet Bel Air, 150, and 210 models (except station wagon, Nomad models.. This reproduction fuel tank is manufactured in stainless steel replicating the...

Product#: K521

1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models

OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...

Product#: FT3003B

1957 Chevy Bel Air, 150, 210; Niterne Coated Fuel Tank; 16 Gallon; w/Square Corners; with Vent Tube

Reproduction of the original fuel tank designed for use with 1957 Chevy Bel Air, 150, and 210 models (except wagon). This reproduction tank is manufactured in quality NiTerne coated steel and features square corners and comes...

Product#: FT3002B

1957 Chevrolet Bel Air, 150, 210; Ni-Terne Coated Fuel Tank; with Square Corners; with Vent Tube; 16 Gallon Capacity; Except Nomad, Station Wagon Models

Reproduction of the original Ni-Terne fuel tank designed for use exclusively with 1957 Chevrolet Bel Air, 150, 210 models except Nomad, and station wagons. This OE-quality Ni-Terne coated reproduction stamped steel fuel tank...

Product#: FT3003A

1957 Chevy Bel Air, 150, 210; Zinc Coated Fuel Tank; w/Square Corners; with Vent Tube; 16 Gallon Tank

Reproduction of the original fuel tank designed for use with 1957 Chevy Bel Air, 150, and 210 models (except wagon). This reproduction tank is manufactured in quality zinc coated steel and features square corners and comes...

Product#: 1518784

1955-57 Chevrolet Bel Air, 150, 210, Del Ray, Sedan, Hardtop, Convertible; Fuel Tank Sending Unit; 3/8" Line; Except Convertible

Reproduction fuel tank sending unit with original design for an authentic fit and genuine appearance. Each sending unit includes the sender, gasket, filter, and a brass float as original. This unit monitors the fuel level in...

Product#: AL124

Accelerator Throttle Rod; Universal Fit

Universal style accelerator throttle rod designed for use on various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the...

Product#: TF700637

1957 Chevrolet Bel Air, 150, 210, Del Ray; Lower Fuel Tank Filler Neck; Zinc Coated; Except Station Wagon, Nomad Models

A reproduction of the original upper fuel tank filler neck designed for use with 1957 Chevrolet Bel Air, 150, 210, and Del Ray, 2 & 4 door convertible, hardtop, and sedan models. Each filler neck is manufactured in quality...

Product#: FT3100B

1955-57 Chevrolet Bel Air, 150, 210; Fuel Tank Mounting Straps; Stainless Steel; Pair; Except Nomad, Station Wagon Models

Reproduction of the original gas tank straps designed for use with 1955-57 Chevrolet Bel Air, 150, 210, Del Ray coupe and sedan models. Each strap is manufactured in quality stainless steel with all correct contours for an...

Product#: CX5042

1954-59 Chevy, GMC Truck; Fuel Tank Sending Unit; Universal Fit; without Pick-Up Tube; 0-90 Ohm

Universal fuel tank sending unit for various GM and other models that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm gauges, each sending unit includes the sender, float, float rod, hardware,...

Product#: FT3101A

1955-57 Chevrolet Station Wagon - Fuel Tank Support Straps - Steel (Pair)

Reproduction fuel tank mounting straps for 1955-57 wagon models. Produced using heavy duty zinc-plated material with all correct contours for an authentic fit and appearance.Approximate strap measurement bend to bend is - 32...

Product#: 153665B

Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black

This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...

Product#: FT5110A

1999-2006 Chevrolet, GMC; C/K Pickup, Silverado, Sierra; Fuel Tank Mounting Straps; with Saddle Mount 26 Gallon Tank; EDP Coated Steel; Pair

Reproduction of the original fuel tank mounting straps designed for use with 1999-2006 Chevrolet, GMC C/K pickup truck, Silverado, and Sierra models with saddle mounted 26 gallon gas tank. Each strap is manufactured in...

Product#: 9047E

Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length

Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...

Product#: 153665A

1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit

This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...

Product#: 9047G

Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length

Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your...

Product#: FT3003C

1957 Chevy Bel Air, 150, 210; Fuel Tank; withVent Tube; with Square Corners; Stainless Steel; 16 Gallon Capacity; Except Nomad, Station Wagon Models

Correct reproduction of the original fuel tank designed for with 1957 Chevrolet Bel Air, 150, and 210 models (except station wagon, Nomad models. This reproduction fuel tank is manufactured in stainless steel replicating the...

Product#: K912

1967-81 GM; Accelerator Pedal Pad Trim Plate; Stainless; Various Models

Reproduction of the original accelerator pedal trim plate designed for use on various GM models. Manufactured to exact factory dimensions, each trim plate is stamped in quality stainless steel offering a supurb appearance....

Product#: FT4000B

1958 Impala, Bel Air, Biscayne; NiTerne Fuel Tank; with Filler Neck; 16 Gallon

Reproduction of the original fuel tank designed for use with 1958 Chevrolet Impala, Bel Air, and Biscayne models (except station wagon). This reproduction fuel tank is manufactured in quality stamped NiTerne steel for rust...