1955-57 Chevy Bel Air, 150. 210; Upper Control Arms; Rubber Bushings; Pair
FEATURED

Product#: 153947

1955-57 Chevy Bel Air, 150. 210; Upper Control Arms; Rubber Bushings; Pair

New stock style upper control arms designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. Includes a pair with cross shafts, bushings, and ball joints installed. These are made from heavy gauge steel and...


Product#: 153628

1958-64 Impala, Bel Air, Biscayne; Front Tubular Lower Control Arms; Pair

These performance tubular lower control arms are designed to accept the standard coil spring, coil-over shocks or shocks with air bags. The arms are powder coated black and pre-assembled with our Del-a-lum bushings, billet...


Product#: 153635

1955-57 Chevy Bel Air, 150, 210; Lower Tubular Control Arms; Pair

Tubular control arms are designed for maximum strength and visual impact. These control arms are designed for a stock replacement offering a great look. All arms capture both sides of the bushing, unlike the originals that...


Product#: 153627

1958-64 Impala, Bel Air, Biscayne; Front Tubular Upper Control Arms; Pair

Reproduction of the original upper tubular upper control arms designed for use with 1958-64 Impala, Bel Air, Biscayne, and Full Size Chevrolet models. These tubular style upper control arms change the way the car drives and...


Product#: TF500042

1955-57 Chevrolet Bel Air, 150, 210; 2" Drop Spindles; RH and LH; Pair

These one piece spindles allow you to lower vehicle ride height 2" without affecting steering geometry or suspension travel, which also eliminates the need for bolt-on caliper brackets or steering arms. Cast from the highest...


Product#: 153951

1958-64 Impala; Lower Control Arms; Rubber Bushings; Pair

New stock style lower control arms designed for use with 1958-64 Chevrolet Impala, Bel Air, Biscayne, and full size models. Includes both RH and LH lower control arms with cross shafts, bushings, and ball joints...


Product#: 153638

1958-64 Impala, Bel Air, Biscayne; Front Disc Brake Spindles; 2" Drop; Pair

These 2" drop spindle are for use when you want to lower your disc brake converted car a full 2". The spindles are precision cast from high quality Ductile Iron, with 4140 Chrom-moly CNC machined pins and accepts factory...


Product#: RL7

3-1/4" Wide X 6-3/4" Long Leaf Spring U-Bolts

Reproduction OE-style U-bolts and nuts for rear leaf springs from OER®. 2 pair required per axle. Comes with heat treated grade 8 nuts and F436 heat treated and hardened heavey duty washers. {specs} Applications: ...


Product#: RSB503

1955-57 Chevrolet Bel Air, 210, 150, Del Ray; Rear Sway Bar Set; 7/8" Diameter; Except Nomad or Wagon Models

Rear sway bar for 1955-57 Chevrolet Bel Air, One-Fifty series, Two Ten series (except Nomad or wagon models). This sway bar is designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...


Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade
NEW

Product#: 154632

Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade

Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...


Product#: 14927

Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each

Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...


Product#: 10268

1970-2005 GM Cars, Trucks; Upper Ball Joint with Hardware; Various Models

Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...


Product#: 14796

1958-64 Impala, Bel Air, Biscayne; Upper Control Arm Shaft Set

Reproduction of the original style upper control arm shafts for use with 1958-64 Impala, Bel Air, and Biscayne models. Set include shafts, bushings, washers and washer/bushing retainer bolts.


Product#: 14794

1955-57 Chevy Bel Air, 150, 210; Upper Control Arm Shaft Set; with Rubber Bushings

This reproduction upper control arm shaft set is for use on 1955-57 full size models. These upper shafts have an extra 2 degrees of caster built into them. The added caster is a must for cars equipped with power steering....


Product#: 12163

1955-64 Chevy Bel Air, 150, 210, Biscayne, Impala; Lower Control Arm Bushing Set; 4 Piece Set

Reproduction of the original lower control arm bushings designed for use with 1955-64 Chevrolet Bel Air, Impala, Corvair, and Full Size models. Each bushing is manufactured to factory specifications. Add new life to your...


Product#: 12297

1971-05 GM; Lower Control Arm Bushing; Passenger Car and Truck

Reproduction control arm bushing for the lower control arm on various 1971-05 GM and various other models. Manufactured in steel clad rubber to be pressed into place. If your suspension rattles or makes noises when turning...


Product#: TF500055

1956-57 Chevy Bel Air, 150, 210; Leaf Spring Shackle Set; LH Driver Side

Reproduction rear leaf spring shackle for 1956-57 Chevrolet Bel Air, 150, 210 models. This shackle set is manufactured to correct factory specifications offering an authentic replacement to the old or worn out original...


Product#: C5819

1958-64 Impala, Bel Air, Biscayne, El Camino; Lower Control Arm Plate Set; with Screws and Washers

Reproduction of the original lower control arm plate for use with 1958-64 Chevrolet Impala, Bel Air, and Biscayne models. Each set includes a forged lower control arm plate with Grade-8 screws and washers. 2 sets required per...


Product#: 10395

1983-2005 S10, S15, Blazer, Jimmy, Sonoma; Upper Ball Joint; 2/4 Wheel Drive; Each

Reproduction of the original upper ball Joint for use with various 1983-05 Chevrolet and GMC truck models with 2 or 4 wheel drive. Each ball joint installs into the lower control arm with four bolts, washers and nuts that are...


Product#: 18203

1970-05 Buick, Chevrolet, Oldsmobile, Pontiac; Frontsway Bar End Link

Includes all the components to replace the original bushings and hardware. Each set includes 4 bushings, 1 bolt, 1 nut, 4 washers, and 1 spacer. Set does only 1 side. 2 required per vehicle.