1955-57 Chevy Bel Air, 150. 210; Upper Control Arms; Rubber Bushings; Pair
FEATURED

Product#: 153947

1955-57 Chevy Bel Air, 150. 210; Upper Control Arms; Rubber Bushings; Pair

New stock style upper control arms designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. Includes a pair with cross shafts, bushings, and ball joints installed. These are made from heavy gauge steel and...


Product#: 153628

1958-64 Impala, Bel Air, Biscayne; Front Tubular Lower Control Arms; Pair

These performance tubular lower control arms are designed to accept the standard coil spring, coil-over shocks or shocks with air bags. The arms are powder coated black and pre-assembled with our Del-a-lum bushings, billet...


Product#: 153635

1955-57 Chevy Bel Air, 150, 210; Lower Tubular Control Arms; Pair

Tubular control arms are designed for maximum strength and visual impact. These control arms are designed for a stock replacement offering a great look. All arms capture both sides of the bushing, unlike the originals that...


Product#: 153627

1958-64 Impala, Bel Air, Biscayne; Front Tubular Upper Control Arms; Pair

Reproduction of the original upper tubular upper control arms designed for use with 1958-64 Impala, Bel Air, Biscayne, and Full Size Chevrolet models. These tubular style upper control arms change the way the car drives and...


Product#: 153948

1955-57 Chevy Bel Air, 150. 210; Lower Control Arms; Rubber Bushings; Pair

New stock style lower control arms designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. Includes both RH and LH lower control arms with cross shafts, bushings, and ball joints pre-installed. Each lower...


Product#: TF500042

1955-57 Chevrolet Bel Air, 150, 210; 2" Drop Spindles; RH and LH; Pair

These one piece spindles allow you to lower vehicle ride height 2" without affecting steering geometry or suspension travel, which also eliminates the need for bolt-on caliper brackets or steering arms. Cast from the highest...


Product#: 153951

1958-64 Impala; Lower Control Arms; Rubber Bushings; Pair

New stock style lower control arms designed for use with 1958-64 Chevrolet Impala, Bel Air, Biscayne, and full size models. Includes both RH and LH lower control arms with cross shafts, bushings, and ball joints...


Product#: *K45301

1958-64 Chevrolet Impala Front End Rebuild Kit

1958-64 Chevrolet Impala nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Each...


Product#: 153638

1958-64 Impala, Bel Air, Biscayne; Front Disc Brake Spindles; 2" Drop; Pair

These 2" drop spindle are for use when you want to lower your disc brake converted car a full 2". The spindles are precision cast from high quality Ductile Iron, with 4140 Chrom-moly CNC machined pins and accepts factory...


Product#: RL7

3-1/4" Wide X 6-3/4" Long Leaf Spring U-Bolts

Reproduction OE-style U-bolts and nuts for rear leaf springs from OER®. 2 pair required per axle. Comes with heat treated grade 8 nuts and F436 heat treated and hardened heavey duty washers. {specs} Applications: ...


Product#: FSB900

1955-57 Bel Air, 150, 210, Nomad; Front Sway Bar; 1" Diameter

These sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle handling and control. These offer all of the above without affecting your ride quality. Kit...


Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade
NEW

Product#: 154632

Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade

Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...


Product#: 14927

Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each

Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...


Product#: 14796

1958-64 Impala, Bel Air, Biscayne; Upper Control Arm Shaft Set

Reproduction of the original style upper control arm shafts for use with 1958-64 Impala, Bel Air, and Biscayne models. Set include shafts, bushings, washers and washer/bushing retainer bolts.


Product#: 14794

1955-57 Chevy Bel Air, 150, 210; Upper Control Arm Shaft Set; with Rubber Bushings

This reproduction upper control arm shaft set is for use on 1955-57 full size models. These upper shafts have an extra 2 degrees of caster built into them. The added caster is a must for cars equipped with power steering....


Product#: 12163

1955-64 Chevy Bel Air, 150, 210, Biscayne, Impala; Lower Control Arm Bushing Set; 4 Piece Set

Reproduction of the original lower control arm bushings designed for use with 1955-64 Chevrolet Bel Air, Impala, Corvair, and Full Size models. Each bushing is manufactured to factory specifications. Add new life to your...


Product#: TF500055

1956-57 Chevy Bel Air, 150, 210; Leaf Spring Shackle Set; LH Driver Side

Reproduction rear leaf spring shackle for 1956-57 Chevrolet Bel Air, 150, 210 models. This shackle set is manufactured to correct factory specifications offering an authentic replacement to the old or worn out original...


Product#: *TF500326

1955-57 Chevrolet Passenger Car Tubular Control Arm Set Upper and Lower

These tubular control arms are designed for maximum strength and enhance the handling performance of 1955-57 Chevrolet passenger car models. These arms are not only stronger and lighter weight than the factory arm, they also...


Product#: 153634

1955-57 Chevy Bel Air, 150, 210; Upper Tubular Control Arms; Pair

Enhance the handling performance of your 1955-57 Chevrolet Bel air, 150, 210, or Nomad model with tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved...


Product#: 153950

1958-64 Impala, Bel Air, Biscayne; Upper Control Arms; Rubber Bushings; Pair

New stock style upper control arms designed for use with 1958-64 Chevrolet Impala, Bel Air, Biscayne, and full size models. Includes both RH and LH lower control arms with cross shafts, bushings, and ball joints...