Chevrolet Nova Parts - Brake Hardware

Correct replacement shoe guide for all front and rear drum brake applications. This plate holds the top of the brake shoes in place. 2-15/16" o.l. x 7/64" thick.

Brake adjusting hole cover is for use on various GM models. Original GM. Sold individually.

This 18-piece hardware set includes the front rotor and spindle nuts, washers, pins necessary to hold the rotor or drum to the spindle, spindle to the upper/lower control arms and the spindle to the end link. For use with...

This drum brake self-adjuster repair kit for the rear RH (right hand) side is manufactured and tested to the strictest OE standards for unparalleled performance. Built for trouble-free ownership and 100% visually inspected...

This drum brake self-adjuster repair kit for the rear LH (left hand) side is manufactured and tested to the strictest OE standards for unparalleled performance. Built for trouble-free ownership and 100% visually inspected and...

Front and rear return spring for 1963-75 Novas without disc brakes and metallic linings. 7-1/2" coils 1-1/2 free length (red). Sold individually.

Specially drilled bolt that secures the brake line to the caliper. Includes 2 bolts and 4 washers (gaskets).

Original GM gasket. The gasket inserts between the steering knuckle and backing plate. Helps eliminate noise or squeaking when applying the brakes. Sold individually. Applications: 1970-81 Camaro 1970-81 Fir ebird 1971-96...

This kit includes the brake shoe adjustment sprocket, brake shoe upper retainer and the adjustment plate. Fits 1964-78 front or rear right hand side

This kit includes the brake shoe adjustment sprocket, brake shoe upper retainer and the adjustment plate. Fits 1964-78 front or rear left hand side

Recommended replacement whenever replacing your front disc brakes. 2 required. Clip on type.

Reproduction of the original style front disc brake back plate or dust shield for use various 1970-90 GM models. The backing plate will help to keep brake pad dust from contaminating front suspension components. Sold in...

No brake job is complete without new brake hardware! This professional quality brake hardware kit is packaged in a complete axle set. No longer do you have to search for every little piece when rebuilding your brakes... this...

Reproduction of the original style front disc brake back plate or dust shield for use various 1970-90 Chevrolet, Buick, Oldsmobile and Pontiac models. The backing plate will help to keep brake pad dust from contaminating...

This hardware set includes the front nuts, washers and pins needed to hold the rotor to the spindle for disc brakes and hub for drum brakes.

Rebuilding your disc brake calipers? Don?t forget to replace the pistons! Moisture is drawn in as brake system cools, causing hidden problems that can only be eliminated with a complete caliper rebuild. For this reason, we...

No brake job is complete without new brake hardware! This professional quality brake hardware kit is packaged in a complete axle set. No longer do you have to search for every little piece when rebuilding your brakes... this...

Reproduction of the original style front disc brake back plate or dust shield for use various 1970-90 Chevrolet, Buick, Oldsmobile and Pontiac models. The backing plate will help to keep brake pad dust from contaminating...

No brake job is complete without new brake hardware! This professional quality brake hardware kit is packaged in a complete axle set. No longer do you have to search for every little piece when rebuilding your brakes... this...

Reproduction of the original style bleeder screws designed for use with various 1967-74 GM models as listed. Includes front brake plastic OEM dirt caps. Designed for bleeding brakes. Includes set of 6 screws. {fitment}

Rear retaining pins, springs and cups for models with 9-1/2" drum brakes. Sold as a wheel set. Applications: 1967-81Camaro 1965-72 Chevelle 1965-72 El Camino 1967-97 Firebird 1977-96 Impala 1977-96 Caprice 1964-79 Chevy II...

No brake job is complete without new brake hardware! This professional quality brake hardware kit is packaged in a complete axle set. No longer do you have to search for every little piece when rebuilding your brakes... this...

Specially drilled bolt that secures the brake line to the caliper. Includes 2 bolts and 4 washers (gaskets).

SL6 billet six-piston calipers with 13" or 14" rotors deliver the ultimate combination for braking power and style in this group of sets engineered for traditional non-ABS spindles on American muscle cars. Built exclusively...

SL6 billet six-piston calipers with 13" or 14" rotors deliver the ultimate combination for braking power and style in this group of sets engineered for traditional non-ABS spindles on American muscle cars. Built exclusively...

This set is correct for the 1969-72 A/F/X Body single piston banjo bolts with the factory correct 5/8" head. Includes 4 crush washers. IMPORTANT: Make sure to check the size of the banjo bolt. GM used two different bolts:...

Reproduction of the original style drum brake bleeder screws designed for use with various 1965-72 GM models as listed. Includes front brake plastic OEM dirt caps. Designed for bleeding brakes. Includes set of 4 screws. ...

Reproduction of the original style front disc backing plates designed for use with various 1969-74 GM models. Each backing plate is manufactured to OE specifications replicating the original. For use with single piston front...

Reproduction of the original style 2" drop spindles for various 1964-72 Buick, Chevrolet, Pontiac, and Oldsmobile A, F, and X body models. These 2" drop spindles will replace OE single piston disc brake spindles. The stock...

Reproduction style front disc backing plates designed for use with various 1964-74 Buick, Chevrolet, Oldsmobile, and Pontiac models with 2" drop spindles. Fits most A, F, X-Body applications that are running our part # 153636...

This set is correct for the 1978-81 A/F/X Body single piston banjo bolts with the factory correct 5/8" head. Includes 4 crush washers. IMPORTANT: Make sure to check the size of the banjo bolt. GM used two different bolts:...

Reproduction of the original rear brake backing plates for models with 9-1/2" rear drum brakes. Stamped to exact factory specifications featuring the correct thickness and includes the riveted stud. Sold as a pair. ...

Reproduction of the original caliper mounting pins for single piston calipers. Sold as a pair. One pair per caliper required. Applications: 1969-81Camaro models 1969-81Firebird models 1968-96 Impala / full size models...

AC Delco replacement outer O-ring bushing which the caliper bolt and bushings goes through when installed. For use on single piston caliper disc brake models. Sold individually. 4 required. Applications: 1969-96 Camaro...

3/4"-20 w/1-1/16" hex head spindle nut and plated 1/8" x 1-1/2" cotter pin for securing drum or rotor to spindle. Kit contains one nut and one cotter pin. 2 kits required per vehicle. Applications: Buick: 1978-87 Regal...

Special bolts required to secure the caliper bracket to the spindle.

Wheel cylinder pins for 1967-69 Camaro models.These pins go into both sides of the wheel cylinder and are used to activate the drum shoes. Requires two per wheel cylinder or four per car with disc/drum brakes. Requires 8 per...

Reproduction of the OE caliper bracket designed for use on various 1969-74 GM models equipped with single piston disc brake calipers. Each bracket is stamped steel construction featuring all of the correct holes, curves and...

Reseal your brake caliper with this repair set. 1 set required per piston. 2 sets required per vehicle. Buick Applications: 1975 Apollo 1975-77 Century 1991-96 Commercial Chassis 1975-78 Electra 1979 Electra Rear Drum...

The caliper bolt allows the caliper assembly to float. Worn or damaged sleeves and bolts can be noisy and dangerous. These sleeves are designed for all brake systems.

Reproduction of the front disc caliper hose bolt for 1969-1977 models with single piston calipers.

Caliper brackets for 2" drop spindles.

The 2208F speed bleeders fit: - 1996-98 Mustang Cobra front or rear disc - 1999-04 Mustang front disc (including Cobra) - 2005-08 Mustang front or rear disc (with ABS) Now you can bleed your hydraulic braking system quickly...

The 2208G speed bleeders fit: - 1968-73 Mustang front disc Now you can bleed your hydraulic braking system quickly and easily by yourself! "Speed Bleeders" simply replace your original bleeder screws at each wheel cylinder...

The 2208H speed bleeders fit: - 1994-04 Mustang rear disc Now you can bleed your hydraulic braking system quickly and easily by yourself! "Speed Bleeders" simply replace your original bleeder screws at each wheel cylinder...