Chevrolet Nova Parts - Weatherstrip

This reproduction door weatherstrip clip is used on most GM vehicles which require plastic push in clips. These hook into holes in the door rubber weatherstripping and hold the weatherstrip to the door. Also used on Most GM...

Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...

When it comes to relining the door and quarter window channels, this Mohair liner material is what you'll need. A finely textured mohair lining material with a rubberized backing. Inside the door, there are "U" shaped...

3M auto sealer is a black flowable product for installing weatherstrip that requires glue, or repairing leaks between glass and rubber or metal surfaces. Permanently seals windshields, back glass and other places where...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

Reproduction roof rail weatherstrip channel screw set for 1970-81 Camaro, Firebird, and other various GM models. These screws feature the correct style large head that is required for mounting coupe weatherstrip channels. #8...

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4?, Two 5/8? and one 1/2?...

This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...

Correct staple to install fender skirt splash aprons for various models. 1/2" wide, 1/2" deep.

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

This hook tool has a small, round steel ball on the end. Once the steel ball is inserted down into the rubber gasket, it is very difficult for it to come out. If it should slip out of the gasket, there is less of a chance you...

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4?, Two 5/8? and one 1/2?...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

Use the rope in tool when working with rubber gasket set glass. The unique counter-grip plastic handle injects the rope through its stem as it is pulled around the gasket. There is plenty of enough durable rope to fit around...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

OER butyl rubber sealant for installing front windshield or back glass installation. Can be used on virtually all models of Chrysler, GM, and Ford that did not use a contoured molded style weatherstrip for installation of the...

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4?, Two 5/8? and one 1/2?...

Reproduction of the radiator support to hood seal clip set designed for 1967-69 Camaro and Firebird models with air conditioning. Each clip is injection molded to original specifications. Clips are designed to hold the hood...

Sometimes you are forced to punch a hole in your firewall to get additional wires into the engine compartment, but that hole you cut is sharp and can potentially sever wires. To help prevent this, install this universal wire...

Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...

Professional windshield removal tool for all vehicle applications. Features an aluminum handle with diamond cut pattern for added grip. Heavy duty braided wire secures the pull handle to the cutting blade. Large durable...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

Precision's weatherstrip lube significantly reduces friction, thereby reducing the installation force required to assemble parts & fittings. Helps to avoid injuries related to slippage and repetitive stress, reduces rejects,...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

Reproduction of the original small 4-hole firewall wire harness grommet for use with all 1950-59 Chevrolet, GMC trucks, and 1955-57 Chevy Bel Air, 150, 210, Nomad models. Manufactured to EPDM rubber to factory specifications....

Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...

Reproduction of the large 4-hole firewall wire harness grommet for all 1955 Chevrolet cars and 1955-59 Chevrolet and GMC trucks. Can also be used for custom or as a universal fit grommet for other applications. Measures 1...

Replacement style self-tapping screws designed to attach the weatherstrip channels on 1962-67 Chevy II/Nova, 1967-69 Camaro. and 1967-69 Firebird coupe or convertible models. These screws feature the large head that is...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...

When it comes to relining the door and quarter window channels, this Mohair liner material is what you'll need. A finely textured mohair lining material with a rubberized backing. Inside the door, there are "U" shaped...

The lockstrip insert tool is is specifically designed for self-sealing two-piece rubber weatherstripping. The eye of the tool threads locking strip into the groove and inserts it into the channel.

Circular seal which fits between motor and firewall which prevents water from entering through the firewall area. This is a small gasket that can keep your interior free from water which can ruin your carpet and rust your...

Vintage style wire port allows you to pass wiring through the firewall and adds to a classic look. Cast finned cover conceals a bushing and backplate that will handle up to a 3/4" bundle of wires. Measures 2-7/8" round,...

Exact reproduction of the original style rear door weatherstripping designed for use on Nova and X-body GM models. This weatherstrip seals the door frame from the top of the roof line around the rear door. After installed,...

Reproduction of the original trunk weatherstrip for a wide variety of GM models including 1962-1977 Chevy II, Nova and X Body models. Each rubber weatherstrip measures 16-1/2 feet in length, and is manufactured with correctly...

Satin finish cast aluminum finned insert for JJ001 rubber boot seals. Fits in above steering column.

By replacing the worn out felt channels and setting the glass to the up position, you can stop the rattles and leaks in your 1968-72 Nova and 1971-72 Ventura quarter window glass. This replacement style weatherstrip/felt...

Reproduction of the original door lock gasket designed for use on various GM models including the listings below. After repainting your doors, or whenever replacing door locks, be sure to install new lock cylinder gaskets to...

This Firewall Rubber Boot Seal features a highly polished 304 stainless steel bezel and hardware and a flexible rubber boot that can accommodate wiring or tubing from 5/16? to 1? in diameter. This boot cleans up the...

Reproduction of the original firewall wiring harness gutter designed for a wide variety of 1965-70 GM vehicles. This reproduction wire harness gutter holds the engine harness as it passes against the firewall area to protect...

Reproduction of the original molded vent window seals designed for use on 1968-72 Chevy II / Nova and X-Body, 2 door models. MEach weatherstrip is manufactured of durable rubber for an authentic appearance and original fit....

High quality reproduction of the original weatherstrip seal which attaches to the cowl panel and seals the area between the hood and windshield. This reproduction is manufactured to exact specifications allowing the seal to...

This kit rebuilds your 1973-74 Nova. It includes both upper channels, both vertical channels, rivets, and the hardware for mounting your original channel. With out chrome bead.

Polyurethane lower control arm bumper stops are guaranteed to last longer and perform better than O.E.M. rubber stops. Cushions impact between suspension components preventing excessive damage. Sold as a pair. 1 pair required...

Correct reproduction of the original power window harness rubber boots which is used to house the power window wiring harness as it passes between the door jamb and door area. This rubber boot is manufactured in durable...

Correct reproduction of the original rubber stop bumper designed to keep the door glass from rolling down beyond the required travel point. Each stopper is manufactures from quality EPDM rubber and features a press fit...

By replacing the worn out felt channels and setting the glass to the up position, you can stop the rattles and leaks in your 1973-74 Nova, Apollo, Omega, and Ventura quarter window glass. These replacement style...

Sometimes you are forced to punch a hole in your firewall to get additional wires into the engine compartment, but that hole you cut is sharp and can potentially sever wires. To help prevent this, install this universal wire...

1968-72 Chevrolet Nova 2 door sedan only vertical glass channel. Attaches to the forward quarter glass with setting tape. Includes plastic guides for full functioning quarter window. {fitment}

Excellent reproduction of the original body seal strip designed for use with 1968-72 Chevy II and Nova models. This strip is designed to seal and fill the area where the rear bumper meets the body. This often damaged or...

Reproduction of the original brake and clutch pedal rubber bumpers designed for use on various GM models from 1947-1972. Each bumper is designed and manufactured to replicate the original for a perfect replacement. Includes...

Reproduction of the original style fender skirt splash aprons for use with 1975-79 Chevrolet Nova and GM X-Body models. Replace your old splash aprons with new reproductions and keep your engine compartment clean and free of...

Reproduction of the original style weatherstrip clip receiver seal designed for 1958-71 GM models. These small plugs are inserted into the door and provide a mounting point for the door frame weatherstrip clips to insert...

Reproduction of the original license plate / fuel door stoppers used for the rear license bracket. These are OE type reproductions manufactured to exact OE specifications. Sold in pairs. 9/16" diameter, 13/16" tall. GM Note:...

This door handle O-ring is one of the most overlooked replacement parts on any vehicle. The O-ring inserts onto the outer door handle push button and eliminates rattling and wear between the handle and the push button....

Eliminate the rattling and looseness of the glove box or console door by simply replacing worn out or missing rubber stoppers with these high quality reproduction rubber stoppers. Designed for use with a variety of 1938-1991...

Reproduction die-cut trunk lock cylinder gasket designed to seal the trunk lock cylinder to the body. This gasket is designed for use on the listings below. Each gasket will fit and function as original. This is a non-molded...

Reproduction of the original seat back rubber stoppers designed for use on various 1961-79 GM models. These rubber stoppers help prevent rattling and keep the seat back positioned correctly. Replace worn out or missing seat...