Chrysler All Models Parts - Suspension

Original replacement press-in style lower ball joint for select Chrysler B-body models. These OE quality ball joints meet or exceed factory specifications. Fits right or left side, sold individually. Note: Threaded ball...

Restorer's Choice™ premium replacement press-in style lower ball joint for select Chrysler B-body models. These high quality ball joints feature a hardened steel stud ball with a full 360-degree range of movement,...

Reproduction lower control arm bump stop spacers for all 1960-76 models. These spacer were used on models with 15" wheels, to prevent the front end from bottoming out.

Original replacement screw-in style lower ball joint for select Chrysler B-body models. These OE quality ball joints meet or exceed factory specifications.Sold individually. Note: Threaded ball joints are distinguishable by...

Standard design strut rod bushing kit for 1966-74 Mopar B-body and C-body vehicles. These OE-style rubber bushings are factory replacement for models manufactured up to 10/19/73. They will meet or exceed the factory ride and...

Reproduction front eye leaf spring bushings for B/E-body Mopar models. These are made by the original manufacturer who made these for Mopar. They look and install just like the originals. Measurements are: 2" outer dia, 5/8"...

If you might be looking for front end sturdiness or better performance; we offer polyurethane sway bar to frame bushings. These bushings replace those OEM soft rubber bushings and give your classic vehicle better handling and...

Replace those broken or missing control arm bumper stops with new polyurethane bumper stops. Sold as a pair. Made in USA Applications: A-Body 1 962 Lancer 1962-76 Valiant 1963-76 Dart 1964-69 Barracuda 1970-76 Duster...

If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...

If you might be looking for front end sturdiness or better performance; we offer polyurethane sway bar to frame bushings. These bushings replace those OEM soft rubber bushings and give your classic vehicle better handling and...

Reproduction front eye leaf spring bushing for B/E-body Mopar models. This bushing is made by the original manufacturer who made these for Mopar. Looks and installs just like the original Sold each. 2 required per vehicle. ...

Replace your old rubber dust boots with polyurethane dust boots for better wear and protection from the elements and road debris. Made in USA Sold as a pair. Applications: A-Body 1960-62 Lancer 1962-76 Valiant 1963-76...

Ball joint sockets for 1960-76 Mopar models. These sockets are used on Chrysler products with screw in ball joints. They have a 3/4" square drive and are four-point.

These replacement polyurethane rear leaf spring bushing sets include a complete set of eight rear bushings four front bushings and two replacement sleeves for a complete replacement. We offer these in the stock-looking black...

Replaces that original, short lived and too soft OE rubber with this polyurethane kit to help reduce common wheel "roll under" that occurs when stopping abruptly, especially when using performance tires. 1 kit required per...

Ball joint sockets for 1960-76 Mopar models. These sockets are used on Chrysler products with screw in ball joints. They have a 3/4" square drive and are four-point.

Replace those old, worn out or broken control arm bumpers with all new polyurethane bumper stops. These stops replicate the original in design and functionality, but are manufactured with modern polyurethane material for long...

Upgrade those soft and worn-out rubber bushings on your 1973-76 Mopar B-Body with new and firm polyurethane bushings. Installing these will improve your handling by keeping your torsion bar crossmember firm so your torsion...

These bushings mount at the end of the torsion bar. Made in USA Applications: 1973-74 Charger 1973-74 Coronet 1973-74 Satellite 1973-74 Road Runn er

Reproduction of the original front sway bar set designed for use on various 1973-74 Charger, Coronet, Satellite, and Road Runner models. Each sway bar is manufactured to correct factory specifications replicating the original...

These polyurethane bushings maintain better alignment while cornering, stopping and hard launching than soft OEM rubber. A must for lowered Mopar vehicles where weight transfer causes distortion. All control arm bushings are...

Standard design strut rod bushing kit for 1957-65 Chrysler/Pymouth/Dodge vehicles. These rubber bushings are factory replacement for various models listed. They will meet or exceed the factory ride and handling. 1 kit...

Replace your old rubber dust boots with polyurethane dust boots for better wear and protection from the elements and road debris. Made in USA Set includes 2 upper boots and 2 lower boots. Applications: A-Body 1960-62...

Reproduction of the original sway bar bushing designed for use with 1960-65 Dodge and Plymouth models and 1970-74 E Body models. Made from a performance rubber compound these will give you superior handling over the stock...

Restorer's Choice™ premium replacement upper ball joint for 1957-77 Mopar C-body, D-body and other Chrysler full size models. These vital suspension components are commonly worn and in need of replacement. They are...

Lower control arm bushing for 1974-78 Mopar C-Body models including Imperial, Newport. Monaco, and Gran Fury. These vital suspension components are commonly worn and in need of replacement. They are often responsible for...

Factory-style replacement shocks for B and E-body models. These shocks are manufactured to factory specifications and are rated for heavy duty applications. Sold as a pair. Applications: B-Body 1 962 Dart 1962-64 Polara...

Factory-style replacement shocks for B and E-body models. These shocks are made to factory specifications and are rated for standard duty driving. Sold as a pair. Applications: B-Body 1966-68 Charger 1965-72 Coronet...

Replace your old rubber dust boots with polyurethane dust boots for better wear and protection from the elements and road debris. Made in USA Sold as a pair. Applications: A-Body 1960-62 Lancer 1962-76 Valiant 1963-76...

Restorer's Choice™ premium replacement front upper control arm bushing set for 1965-73 Mopar C-body models. These vital suspension components are commonly worn and in need of replacement. They are often responsible for...

Upgrade your old rubber leaf spring pads with these polyurethane leaf spring pads for better durability than OE pads. Made in USA Applications 1973-74 Charger 1976-74 Coronet 1973-74 Road Runner 1973-74 Satellite

Reproduction of the original front sway bar set designed for use on various 1965-70 Chrysler 300, New Yorker, Newport, Dodge Monoco, Polara, and Plymouth Fury models. Each sway bar is manufactured to correct factory...

Restorer's Choice™ premium replacement upper control arm bushing kit for select 1974-78 Mopar C-body models. These vital suspension components are commonly worn and in need of replacement. They are often responsible for...

Passenger side front lower steering arm and ball joint assembly for all 1965-73 Mopar C-body models with drum brakes and 1969-73 models with disc brakes. These vital suspension components are commonly worn and in need of...

These replacement polyurethane rear leaf spring bushing sets include a complete set of eight rear bushings four front bushings and two replacement sleeves for a complete replacement. We offer these in the stock-looking black...

Reproduction of the original rear sway bar designed for use with various 1971-74 Dodge Charger, 1971 Coronet, 1971 Super Bee, and 1971-74 Plymouth Satellite, Road Runner models as listed. Each 3/4" sway bar is manufactured to...

Restore the handling of your classic and reduce front tire wear with this rebuild set. The set will renew your worn out front suspension with all new components. Replacing these vital suspension components will significantly...

Front upper control arm bushings for 1965-73 Mopar C-body models. These vital suspension components are commonly worn and in need of replacement. They are often responsible for steering misalignment, handling issues, and...

Upgrade those soft and worn-out rubber bushings on your 1973-76 Mopar B-Body with new and firm polyurethane bushings. Installing these will improve your handling by keeping your torsion bar crossmember firm so your torsion...

These polyurethane bushings maintain better alignment while cornering, stopping and hard launching than soft OEM rubber. A must for lowered Mopar vehicles where weight transfer causes distortion. All control arm bushings are...

Replace those broken or missing control arm bumper stops with new polyurethane bumper stops. Sold as a pair. Made in USA Applications: A-Body 1 962 Lancer 1962-76 Valiant 1963-76 Dart 1964-69 Barracuda 1970-76 Duster...

These bushings mount at the end of the torsion bar. Made in USA Applications: 1973-74 Charger 1973-74 Coronet 1973-74 Satellite 1973-74 Road Runn er

Replace your old rubber dust boots with polyurethane dust boots for better wear and protection from the elements and road debris. Made in USA Set includes 2 upper boots and 2 lower boots. Applications: A-Body 1960-62...

Adjustable eccentric camber alignment bolt kit for 1960-76 Mopar A, B, and E-body vehicles. This kit includes all the bolts, washers, and nuts required to install and align one upper control arm. They will allow up to 2-1/4...

Upgrade your old rubber leaf spring pads with these polyurethane leaf spring pads for better durability than OE pads. Made in USA Applications 1973-74 Charger 1976-74 Coronet 1973-74 Road Runner 1973-74 Satellite

Replaces that original, short lived and too soft OE rubber with this polyurethane kit to help reduce common wheel "roll under" that occurs when stopping abruptly, especially when using performance tires. 1 kit required per...

If you might be looking for front end sturdiness or better performance; we offer polyurethane sway bar to frame bushings. These bushings replace those OEM soft rubber bushings and give your classic vehicle better handling and...

Reproduction upper ball joint for 1957-77 Mopar C-body, D-body and other Chrysler full size models. These vital suspension components are commonly worn and in need of replacement. They are often responsible for steering...

Standard design strut rod bushing kit for 1960-72 Mopar A-body vehicles. These OE-style rubber bushings are factory replacement for models manufactured up to 10/19/73. They will meet or exceed the factory ride and handling. 1...

Replace those broken or missing control arm bumper stops with new polyurethane bumper stops. Sold as a pair. Made in USA Applications: A-Body 1 962 Lancer 1962-76 Valiant 1963-76 Dart 1964-69 Barracuda 1970-76 Duster...

Upper control arm bushing set for 1959-64 Mopar models. These vital suspension components are commonly worn and in need of replacement. They are often responsible for steering misalignment, excess steering wheel play, and...

If you might be looking for front end sturdiness or better performance; we offer polyurethane sway bar to frame bushings. These bushings replace those OEM soft rubber bushings and give your classic vehicle better handling and...

Reproduction lower ball joint for 1967-78 Mopar C-body models with drum brakes and 1969-73 C-body models with disc brakes. These vital suspension components are commonly worn and in need of replacement. They are often...

Driver side front lower steering arm and ball joint assembly for all 1965-73 Mopar C-body models with drum brakes and 1969-73 models with disc brakes. These vital suspension components are commonly worn and in need of...

Restorer's Choice™ premium replacementlower ball joint for 1967-78 Mopar C-body models. These vital suspension components are commonly worn and in need of replacement. They are often responsible for steering...

Reproduction of the original upper shock absorber bushings designed for use with 1964-74 Chrysler, Dodge and Plymouth models as listed. Each bushing is manufactured in quality EPDM rubber to correct factory dimensions...

Replace your worn out or missing traction bar rubber snubbers with these quality units manufactured by Lakewood traction bars. Sold as a pair. Made in U SA Important: LW20470, LW20475 require small bumpers which are no...

Reproduction rear sway bar designed for use with various 1965-73 Chrysler, 1965-70 Dodge, Plymouth models with a 3/4" bar. Each sway bar is manufactured to correct factory specifications replicating the original in design and...