Chrysler Crown Imperial Parts - Ignition System

Chrome plated steel cover that slides over factory vacuum advance units. Attaches with double sided tape. Fits most classic vaccum advance distributors.

Taylor fire sleeve boot protectors are 6" long silicone coated braided fiberglass sleeves that offer continuous protection up to 500 degrees F. They slide over most plug boots. Sold as a set of 8.

Street Fire plug wires deliver quality performance at a budget price. Externally they feature a durable 8mm silicone/synthetic jacketing and high-temp silicone boots. Internally they feature a helically wound conductor with a...

These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine....

This 2-Step Rev Control could be added to give you the ability to switch to a low rpm limit to use on the starting line. Features two easy to read rotary dials that let you set the launch rpm in 100 rpm increments. There is...

Taylor 409 Pro Race 10.4mm high performance ignition wires are designed for street and track performance. Featuring tightly woven heat treated fiberglass braid over a 100% silicone Spiro-Pro ignition wire providing a 3-layer...

Taylor 409 Pro Race 10.4mm high performance ignition wires are designed for street and track performance. Featuring tightly woven heat treated fiberglass braid over a 100% silicone Spiro-Pro ignition wire providing a 3-layer...

This Performance Tune-Up Set will perk up the performance of your stock GM HEI distributor. Set includes 4-pin module and coil combination Premium blue distributor cap Premium rotor Adjustable vacuum advance canister High...

Replace your stock coil with an Accel high performance coil for increased performance, longer life and maximum dependability. Fits 1955-74 with breaker point ignition

These high grade chrome plated plastic support brackets attach to the valve cover bolts or studs to route the plug wires neatly from the distributor, over the valve covers, and to the plugs. Keeps wires away from hot...

Moroso Blue Max 8mm Spark Plug Boot & Terminal Kit, Straight Ends. Manufactured from high temperature silicone. Comes in set of 8 with positive, locking spark plug terminals. Moroso part # 72060.

The TSP power coil is capable of delivering a longer and hotter spark with up to 70% more spark energy than stock ignition coils. Its convenient design easily mounts to fire walls, core supports and fender wells. It features...

Tune-up parts for Mallory breaker point distributors. (all series except 27)

Billet Specialties universal smooth polished billet aluminum plug wire looms for big and small block engines. They feature a unique two-piece design, and adjustable mounting tabs that attach to the base of the valve cover....

Complete your ignition upgrade with a Flame Thrower high performance ignition coil! The Flame Thrower coil fits into your existing coil bracket for a clean, factory look. Enables larger plug gaps for greater fuel efficiency...

Taylor Thunder Volt 8.2mm ignition wires are dyno tested and proven to increase horsepower and torque. Designed with a Ferrite spiral-wound core coated with a blend of copper/nickle bonded with a conductive acrylic cover for...

4-foot CAN-Bus extension harness for MSD Power Grid ignition control systems. This extension provides additional flexibility for the remote mounting of MSD Power Grid controller hubs and accessories. Measures 48 inches in...

The latest coil to be built entirely in house at MSD is designed to be used with MSD 6 and SCI Series Ignition Controls. This coil utilizes an iron U-Core design with a segmented bobbin for improved voltage distribution. The...

Taylor 409 Pro Race 10.4mm high performance ignition wires are designed for street and track performance. Featuring tightly woven heat treated fiberglass braid over a 100% silicone Spiro-Pro ignition wire providing a 3-layer...

The Flame Thrower III Coil is a rapid charge ignition coil to optimize the Ignitor III module. The Flame Thrower III is a traditional oiled filled canister for the "old school" appearance; but will work with modern day...

Clean up your wiring with an MSD Solid State Relay Block. This module takes the place of 4 standard relays and eliminates unsightly wiring. 4 independent channels can be activated using either power or ground. Each channel is...

The MSD Digital-6 Plus Ignition Control combines terrific power, digital accuracy and great accessories making it ideal for street/strip applications. MSD engineers spent an endless amount of time testing the components of...

Replace your stock coil with an Accel high performance coil for increased performance, longer life and maximum dependability. Fits 1955-74 with breakerless ignition

This set of spark plug wire separators is made from high grade plastic which helps insulate the plug wires and reduce shorts and crosstalk. Includes two 4-wire separators, two 3-wire separators, and two 2-wire separators

Street Fire plug wires deliver quality performance at a budget price. Externally they feature a durable 8mm silicone/synthetic jacketing and high-temp silicone boots. Internally they feature a helically wound conductor with a...

These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine....

MSD now offers the perfect addition to your MSD Atomic EFI or other aftermarket electronic fuel injection, the 6EFI Ignition Control. The 6EFI is designed to work in harmony with electronic fuel injection systems and comes...

Taylor Thunder Volt 8.2mm ignition wires are dyno tested and proven to increase horsepower and torque. Designed with a Ferrite spiral-wound core coated with a blend of copper/nickle bonded with a conductive acrylic cover for...

Replacement rotor cap for Mallory breakerless series 47 distributors. {fitment}

Replace your stock coil with an Accel high performance coil for increased performance, longer life and maximum dependability. Fits 1955-74 with breaker point or breakerless ignition

These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products. The double-wall construction keeps the wire and boot cooler in a high-temperature engine....

If you're swapping your HEI, might as well use a nice hold-down clamp at the same time. This black billet aluminum clamp is meaty, and looks great. Heavy-Duty Machined Aluminum. Fits Chevrolet. S/B, V6/90, B/B. Includes...

The TSP power coil is capable of delivering a longer and hotter spark with up to 70% more spark energy than stock ignition coils. Its convenient design easily mounts to fire walls, core supports and fender wells. It features...

This hub allows you to expand the Power Grid system with up to four accessory modules.Note: This part is legal for use on Uncontrolled (Non-Emissions Controlled) Vehicles or Racing Vehicles.

Want to unlock more power from your engine and actually burn less gas? Through an intensive R&D process, E3 has created a spectacular new spark plug that creates the industry?s fastest spark growth and fastest combustion...

Blue Max Solid Core Universal Wire Set with 90 degree Spark Plug Boots. For V8 engines. Coil Wire Length is 36". Pre-terminated at the plug end with 90º boots. Sets contain both HEI and Non-HEI terminals and boots to...

Coils have always had to compromise voltage output against current output. More voltage increases the initial ionization of the spark plug gap, but lowers the amount of current, or heat, that follows across the plug gap. When...

Coils have always had to compromise voltage output against current output. More voltage increases the initial ionization of the spark plug gap, but lowers the amount of current, or heat, that follows across the plug gap. When...

Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing HyperSpark Ignition, from Sniper EFI. The system consists of a CD Ignition Box, Billet...

The MSD 6AL-2 Ignition Control will fire up your street strip car with powerful multiple sparks and full output through redline rpm! TThe multiple spark series last for 20 degrees of crankshaft rotation. Note: Discount...

The ACCEL SuperBox Capacitive Discharge Ignition System is one of the best ignition values on the market, a perfect blend of value and performance. When the engine is running at low rpm, this modern capacitive-discharge...

If you're in the market for a replacement Chrysler igntion box, then this is the kit for you. In the kit you'll get an official licensed Mopar ignition box and a brand new wire harness. When it comes to your MOPAR vehicle,...

Street Fire plug wires deliver quality performance at a budget price. Externally they feature a durable 8mm silicone/synthetic jacketing and high-temp silicone boots. Internally they feature a helically wound conductor with a...

If you're in the market for a replacement Chrysler igntion box, then this is the kit for you. In the kit you'll get an official licensed Mopar ignition box and a brand new wire harness. When it comes to your MOPAR vehicle,...

Replacement distributor cap for Mallory Unilite distributors. Fits 23, 24, 25, 26, 27 and 37 Series. Mallory Heavy-Duty cap is constructed of top quality material and designed to fit your application for long lasting...

Street Fire plug wires deliver quality performance at a budget price. Externally they feature a durable 8mm silicone/synthetic jacketing and high-temp silicone boots. Internally they feature a helically wound conductor with a...

This Performance Tune-Up Set will perk up the performance of your stock GM HEI distributor. Set includes 4-pin module and coil combination Premium Red distributor cap Premium rotor Adjustable vacuum advance canister High...

Billet Specialties universal ball-milled polished billet aluminum plug wire looms for big and small block engines. They feature a unique two-piece design, and adjustable mounting tabs that attach to the base of the valve...

Taylor 409 Pro Race 10.4mm high performance ignition wires are designed for street and track performance. Featuring tightly woven heat treated fiberglass braid over a 100% silicone Spiro-Pro ignition wire providing a 3-layer...

This heat shield set offers spark plug wires and boots the ultimate protection from conductive and radiant heat. The dual purpose sleeving has an aluminized outer surface that reflects 90% of radiant heat, up to 2000° F,...

This heat shield set offers spark plug wires and boots the ultimate protection from conductive and radiant heat. The dual purpose sleeving has an aluminized outer surface that reflects 90% of radiant heat, up to 2000° F,...

The Power Grid Ignition System is the next evolution of our Programmable 7-Series Ignition Controls. The Grid incorporates an efficient 32 bit microcontroller and an all new software program, called MSD View, and is USB...

This hub allows you to expand the Power Grid system with up to four accessory modules.Note: This part is legal for use on Uncontrolled (Non-Emissions Controlled) Vehicles or Racing Vehicles.

Sniper EFI HyperSpark ignition coil from Holley. This coil features an innovative connector and integrated bracket for a secure connection and simplified mounting. Its powerful 135mj of spark ensure complete combustion and...

Complete your ignition upgrade with a Flame Thrower II high performance ignition coil! The Flame Thrower coil fits into your existing coil bracket for a clean, factory look. Enables larger plug gaps for greater fuel...

Replacement rotor cap for Mallory breakerless distributors. Fits 37 and 38 Mallory series distributors. {fitment}

Replacement Ignitor II module for all Pertronix Flame Thrower billet distributors. Gain horsepower, quicker starting and longer plug life. Ignitor II offers enhanced performance levels only found in more expensive "box type"...

Ignition points for all 23, 24, 25 26 and 27 series Mallory breaker point distributors.