Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade
NEW

Product#: 154632

Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade

Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...


Product#: 14927

Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each

Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...


Product#: 154891

1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair

Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...


Product#: W1006

Front Coil Spring to Frame Rubber Insulator; 1/4" Thick; LH or RH

Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...


Product#: FSB904

1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Narrowed Crossmember

Front sway bar kit for hot rods and custom trucks running narrowed corssmember Mustang II front suspension kits. These 3/4" sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in...


Frame Rail Chassis Boxing Plates; Weld-In; For Mustang II IFS Front Suspension Conversion
NEW

Product#: 154633

Frame Rail Chassis Boxing Plates; Weld-In; For Mustang II IFS Front Suspension Conversion

Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...


Product#: A15589

Hex Nut 7/16-14

Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell...

Hex Nut 7/16-14

MSRP $0.99 ea
Classic $0.69 ea

Product#: FSB911

Front Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm, LH or RH

These universal front sway bar end link brackets are for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm. This is a universal bracket sold as a service part, it may...


Universal; 28" Yellow Powder Coated; Traction Bars; For Multi-Leaf Springs Only
FEATURED

Product#: LW20475

Universal; 28" Yellow Powder Coated; Traction Bars; For Multi-Leaf Springs Only

Designed to fit most leaf springs, these bars strengthen rear suspension and reduce wheel hop. They are constructed from heavy gauge rectangular steel and feature MIG welded brackets for extra strength. Rubber snubbers,...


Product#: C222051

Competition Engineering Rear Coil-Over Shock Kit; Universal Design Allows Installation On A Variety Of Chassis.

Competition Engineering Rear Coil Over Shock Kit, Universal design allows installation on a variety of chassis. Complete kit includes 3 way Adjustable Shocks, Upper Mounts and Adjustable Lower Mounts. 3-Way Adjustable Shocks...


Product#: M2DS

CPP; Mustang II, 1975-80 Pinto / Bobcat; 2" Drop Spindles

CPP's Mustang II drop spindles are built from forged steel and heat treated for superior strength. Designed to drop the front end approximately 2" lower than stock while maintaining stock geometry. Will fit 1974-78 Ford...


H&R 2.5" I.D. Race Coilover Spring; 165 lbs./in. Rate; 12 in. Length; 2.50 in. I.D.; Red Powdercoated
NEW

Product#: R25120165

H&R 2.5" I.D. Race Coilover Spring; 165 lbs./in. Rate; 12 in. Length; 2.50 in. I.D.; Red Powdercoated

H&R 2.50? I.D. Race Springs are made with extremely high tensile strength wire alloy which allows the use of a thinner wire thickness. Manufactured using advanced materials and precision technology in Germany, H&R 2.50? I.D....


H&R 2.5" I.D. Race Coilover Spring; 400 lbs./in. Rate; 10 in. Length; 2.50 in. I.D.; Red Powdercoated
NEW

Product#: R25100400

H&R 2.5" I.D. Race Coilover Spring; 400 lbs./in. Rate; 10 in. Length; 2.50 in. I.D.; Red Powdercoated

H&R 2.50? I.D. Race Springs are made with extremely high tensile strength wire alloy which allows the use of a thinner wire thickness. Manufactured using advanced materials and precision technology in Germany, H&R 2.50? I.D....


H&R 2.5" I.D. Race Coilover Spring; 185 lbs./in. Rate; 12 in. Length; 2.50 in. I.D.; Red Powdercoated
NEW

Product#: R25120185

H&R 2.5" I.D. Race Coilover Spring; 185 lbs./in. Rate; 12 in. Length; 2.50 in. I.D.; Red Powdercoated

H&R 2.50? I.D. Race Springs are made with extremely high tensile strength wire alloy which allows the use of a thinner wire thickness. Manufactured using advanced materials and precision technology in Germany, H&R 2.50? I.D....


H&R 2.5" I.D. Race Coilover Spring; 225 lbs./in. Rate; 12 in. Length; 2.50 in. I.D.; Red Powdercoated
NEW

Product#: R25120225

H&R 2.5" I.D. Race Coilover Spring; 225 lbs./in. Rate; 12 in. Length; 2.50 in. I.D.; Red Powdercoated

H&R 2.50? I.D. Race Springs are made with extremely high tensile strength wire alloy which allows the use of a thinner wire thickness. Manufactured using advanced materials and precision technology in Germany, H&R 2.50? I.D....