Dodge All Models Parts - Hardware

Correct replacement muffler clamp is designed to replace the factory originals. This is the early style original replacement clamp for the discriminating restorer! Each clamp includes hardware.

Why bolt up your new side pipe exhaust system with those rusty old clamps you?ve got laying around. Finish off your exhaust system with these stylish chrome clamps. Sold individually.

Plated exhaust clamps now available for chambered or aluminized exhaust systems. Plated clamps offer long-lasting effectiveness over the original style non-coated clamps.

Plated exhaust clamps now available for chambered or aluminized exhaust systems. Plated clamps offer long-lasting effectiveness over the original style non-coated clamps.

Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA

Stainless steel exhaust clamps are now available for chambered or aluminized exhaust systems. This stainless steel clamp offers long-lasting effectiveness over the original style non-coated clamps.

Pypes stainless steel band clamp & band clamp butt connectors make installing and removing exhaust pipes a breeze. The band clamp is perfect for securing slip-fit style joints and exhaust tips, while the butt connectors are a...

Stainless steel exhaust clamps are now available for chambered or aluminized exhaust systems. This stainless steel clamp offers long-lasting effectiveness over the original style non-coated clamps.

Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA Set includes: Eight 9"...

Correct replacement muffler clamp is designed to replace the factory originals. This is the early style original replacement clamp for the discriminating restorer! Each clamp includes hardware.

Plated exhaust clamps now available for chambered or aluminized exhaust systems. Plated clamps offer long-lasting effectiveness over the original style non-coated clamps.

Correct replacement muffler clamp is designed to replace the factory originals. This is the early style original replacement clamp for the discriminating restorer! Each clamp includes hardware.

Hooker collector rings enable the header builder to adapt Hooker collector extensions or reducers to the basic collector. The kit includes two 3-bolt rings, matching gaskets and six bolts.

Stainless steel exhaust clamps are now available for chambered or aluminized exhaust systems. This stainless steel clamp offers long-lasting effectiveness over the original style non-coated clamps.

Correct replacement style Walker exhaust clamp for use with most applications requiring 2-1/8" clamp. Please check your applications carefully before ordering.

Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA Set includes: Six 9" straps...

Correct replacement muffler clamp is designed to replace the factory originals. This is the early style original replacement clamp for the discriminating restorer! Each clamp includes hardware.

1966-70 Mopar B-body exhaust loor pan bracket set. This exhaust floor pan bracket kit is a zinc coated factory replacement that bolts directly on the left ( drivers side) floor pan. The muffler hanger bolts to this bracket...

1970-73 Mopar E-body exhaust floor pan bracket set. This exhaust floor pan bracket kit is a zinc coated factory replacement that bolts directly on the left ( drivers side) floor pan. The muffler hanger bolts to this bracket...

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.

These gaskets seal exhaust manifolds to the cylinder heads. These Ultra-Seal gaskets use a high density material that can handle up to 650 degrees. Sold in pairs.

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

These gaskets seal exhaust manifolds to the cylinder heads. These Ultra-Seal gaskets use a high density material that can handle up to 650 degrees. Sold in pairs. Gasket thickness is .075

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.

If you demand originality for your vehicle, don't settle for anything less than this complete set of OE-type bolts to mount your exhaust manifolds.

These gaskets seal exhaust manifolds to the cylinder heads. These Ultra-Seal gaskets use a high density material that can handle up to 650 degrees. Sold in pairs.

Reproduction of the original exhaust tip hanger bracket for 1972-74 Dodge and Plymouth E-Body models. This bracket bolts to the rear frame rail and supports the exhaust hanger. Each bracket features correct bolt hold...

This resonator floor pan support bracket is made from steel and mounts to the floor pan to provide a place to attach the LH resonator hanger. Hardware is included. Note: The factory welded the RH (passenger side) to the...

These gaskets seal exhaust manifolds to the cylinder heads. These Performance gaskets can handle up to 350 degrees. Sold in pairs.

These gaskets seal exhaust manifolds to the cylinder heads. These Ultra-Seal gaskets use a high density material that can handle up to 650 degrees. Sold in pairs.

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

These reproduction straps hold the resonators and give them additional support. Will fit all 1971 B-Body models.

These flanges connect the exhaust manifold to the head pipe. Flanges made from thick 3/8" steel material that is much less likely to warp than common 1/4" exhaust flanges. 2 required.

These gaskets seal exhaust manifolds to the cylinder heads. These Performance gaskets can handle up to 350 degrees. Sold in pairs.

This 3 piece flange gasket set fits between the heat tubes on Mopar models equipped with Hemi engine. Made of asbestos.

These gaskets seal exhaust manifolds to the cylinder heads. These Ultra-Seal gaskets use a high density material that can handle up to 650 degrees. Sold in pairs.

Reproduction of the original steel muffler floor pan support bracket for use with various 1967-76 Dodge and Plymouth A-body models. This bracket mounts to the floor pan and provides a place to attach the muffler hanger. For...

This resonator floor pan support bracket is made from steel and mounts to the floor pan to provide a place to attach the resonator hanger. Hardware is included. Applications: 1970-74 Barracuda, 'Cuda and Challenger

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.

These hangers bolt to the rear end of the rear frame rail. For all 1968-74 A-Body models with dual exhaust. Made in the USA.

Replacement header flange gaskets for models equipped with a small block LA engine. Eliminate that annoying ticking sound from your header flange! This header flange gasket is made out of graphite foil with a stainless metal...

These gaskets seal exhaust manifolds to the cylinder heads. These Copper-Seal gaskets use "dead-soft" solid copper for extreme heat applications such as turbo-charged vehicles. Sold in pairs.

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.

This clamp secures the heat tubes to the intake manifold. Made from steel like original.

This gasket connects the exhaust manifold to the head pipe. The composite metal design is excellent for all applications and can be removed and reused unlike other gasket materials. Note: 2-1/2" i.d. with 4" cente r to...

These gaskets seal exhaust manifolds to the cylinder heads. These Ultra-Seal gaskets use a high density material that can handle up to 650 degrees. Sold in pairs.

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

Reproduction muffler hangers for 1970-74 Barracuda and Challenger models. These hangers secure the rear side of the muffler to the trunk floor. Will fit models with or without exhaust tips.

Reproduction muffler hangers for all 1968-70 B-Body models. These hangers bolt to the floor pan mounting bracket, at the same time support and clamp the tail pipe to the muffler. For use with a 2-1/4" pipe.

These gaskets seal exhaust manifolds to the cylinder heads. These Performance gaskets can handle up to 350 degrees. Sold in pairs.

These gaskets seal exhaust manifolds to the cylinder heads. These Copper-Seal gaskets use "dead-soft" solid copper for extreme heat applications such as turbo-charged vehicles. Sold in pairs.

High temperature stainless steel cable ties are great for harsh environments. Perfect for installing heavy duty and high temperature sleeving.

Soft conforming aluminum gaskets easily conform to the collector flanges for a superior seal. Each set comes with 2 gaskets and six nuts and bolts.

Soft conforming aluminum gaskets easily conform to the collector flanges for a superior seal. Each set comes with 2 gaskets and six nuts and bolts.

Soft conforming aluminum gaskets easily conform to the collector flanges for a superior seal. Each set comes with 2 gaskets and six nuts and bolts.

Replacement Q-clamps for various Mopar vehicles. Q-clamps were installed at the rear of the vehicle to secure the exhaust tips to the tailpipes.