Dodge All Models Parts - Moldings

Factory-style replacement quarter moldings for 1966-67 Charger models. These moldings are mounted vertically on the rear edge of the quarter panel. Manufactured in stamped aluminum to original specifications. Features the...

Factory-style replacement windshield and rear window upper reveal molding clip for various vehicles. This steel clip measures 3/4" x 11/16". Sold individually. Note: For set of 12 pieces, refer to item # HK525. ...

Reproduction of the original hardware designed to install the trunk lid molding for 1970-74 Mopar E-Body models. This hardware set is used to mount the 3-piece molding set that installs onto the deck lid and the rear quarter...

Reproduction vinyl top moldings for 1970-74 Challenger models. Manufactured to factory specifications featuring original style contours and finish. These are the moldings that finish the rear part of the vinyl top.

Factory-style replacement rocker panel moldings for 1967-69 Dodge Dart models. These moldings attach directly to the rocker panel below the door, extending from the front wheel well to the rear wheel well. Made in USA. Sold...

Reproduction drip rail molding set for 1967-76 A-Body models. Manufactured to factory specifications featuring original style contours and correct stainless steel finish. This is a four piece set. Applications: A-Body ...

Reproduction of the original front windshield moldings designed for use with 1970-74 Mopar E-Body hardtop models. Each molding is manufactured in quality stamped aluminum replicating the original in fitment and appearance....

These factory-style replacement rocker panel moldings mount underneath each door and run from the front fender to the rear quarter panel. Made in USA. Will not fit Charger 500 models. Each molding features proper finish and...

Reproduction of the original convertible belt moldings designed for use on 1970-71 Dodge Challenger models. Each molding features the correct chrome plating and contours like originals and mount to the top of the quarter...

Factory-style replacement trunk lid molding for 1966 Coronet models. This molding mounts on the rear of the trunk lid. Features proper contours and stud location to correctly replace the original molding. Made in USA. Sold...

These factory-style replacement rocker panel moldings mount underneath each door and run from the front fender to the rear quarter panel. Made in USA. Each molding features proper finish and contours to correctly replace the...

Factory-style replacement hood lip molding for 1965 Coronet models. Mounts on the front edge of the hood and features the correct finish. Manufactured to factory specifications to properly replace the original molding....

Factory-style replacement hood lip molding for 1966 Coronet models. Mounts on the front edge of the hood and features the correct finish. Manufactured to factory specifications to properly replace the original molding. Made...

These factory-style replacement rocker panel moldings mount underneath each door and run from the front fender to the rear quarter panel. Made in USA. Each molding features proper finish and contours to correctly replace the...

Reproduction drip rail molding set for 1970-76 A-Body models. Manufactured to factory specifications featuring original style contours and correct stainless steel finish. This is a four piece set. Applications: A-Body ...

These factory-style non-polished replacement rocker panel moldings mount underneath each door and run from the front fender to the rear quarter panel. Measures 82" x 3". Made in USA. Each molding features proper finish and...

Install your 1973-74 Charger vinyl top moldings correctly with this complete clip set. Each set includes fasteners needed to install a set of vinyl top moldings.

Factory-style replacement tail panel molding set for 1966-67 Charger models. This set includes the trunk lid molding along with upper and lower tail panel moldings. Mopar Authentic Restoration™ Product Set does not...

This factory-style replacement wheel opening molding set for 1970-74 Dodge Challenger models is manufactured to factory specs with original-quality materials for an authentic appearance. Sold as a set of 4. Mounting screws...

Reproduction of the original convertible belt moldings designed for use on 1964 Dodge Polara models. These chrome moldings mount to the top of the quarter panel behind the front door and act as a mounting point for the...

Reproduction of the original style trunk deck opening molding for use with 1968-69 Dodge Charger models. This stainless steel molding mounts to the rear of the deck lid opening and finishes off the the tail panel molding set....

Reproduction of the original wheel opening moldings designed for use on 1970-74 Dodge Challenger models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...

Correct reproduction of the back glass molding set for 1970-74 Challenger models. Replace your missing, dented or pitted originals with this quality replacement set that features the correct finish and contours.

Reproduction of the original wheel opening moldings designed for use on 1970-74 Dodge Challenger models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...

Reproduction of the original wheel opening moldings designed for use on 1968-70 Dodge Charger models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...

Factory-style reproduction of the original rear deck lid molding designed for use with 1966-67 Dodge Charger models. Each molding is manufactured in quality stamped aluminum for an authentic appearance and fit. Mounting...

Reproduction of the original wheel opening moldings designed for use on 1970-74 Dodge Challenger models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...

Reproduction of the original wheel opening moldings designed for use on 1968-70 Dodge Charger models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...

This rocker panel molding hardware set is required to mount the rocker moldings, which mount underneath each door and run from the front fender to the rear wheel well. Mopar Authentic Restoration™ Produc t ...

Reproduction of the original lower tail panel molding designed for use with 1966-67 Dodge Charger models. Each molding is manufactured in quality stamped aluminum replicating the original design, appearance, and fitment. Each...

Reproduction of the original front fender "C" moldings designed for use on 1966-67 Dodge Charger models. Manufactured to original specifications, these moldings feature proper countours and chrome plating to correctly replace...

Correct reproduction of the original back glass molding set designed for use on 1968-70 DodgeCharger models. Each molding is manufactured in stamped aluminum to exact factory specifications replicating the original in...

Reproduction of the original wheel opening moldings designed for use on 1970-74 Dodge Challenger models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...

Reproduction of the original upper rear panel molding designed for use with 1966-67 Dodge Charger models. Each molding is manufactured to factory specifications, contoured and stamped correctly for a perfect fit. {fitment}

This rocker panel molding hardware set is required to mount the rocker moldings, which mount underneath each door and run from the front fender to the rear wheel well. Mopar Authentic Restoration™ Produc t ...

Repoduction of the original vinyl top moldings designed for use with 1971-74 Dodge Charger models. Vinyl top moldings are manufactured in quality die-cast zinc and chrome plated offering an authentic appearance. This molding...

Reproduction of the original wheel opening moldings designed for use on 1968-70 Dodge Charger models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...

Reproduction of the original front valance lower panel molding dcesigned for use on 1970 Challenger SE models. Each molding is precision stamped to replicate the original in every detail. Feautures correct mounting points...

Reproduction of the original wheel opening molding designed for use on 1967-76 Dodge A-Body models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...

Reproduction of the original rocker panel moldings designed for use with 1966-67 Didge Charger and Coronet models. Each panel is manufactured in quality stamped aluminum replicating the original configuration and appearance....

This rocker panel molding hardware set is required to mount the rocker moldings, which mount underneath each door and run from the front fender to the rear wheel well. Mopar Authentic Restoration™ Produc t ...

Factory-style replacement hood lip molding for 1970-71 Dodge Challenger models (except T/A). Manufactured to factory specifications to properly replace the original molding and features the correct finish and contours for an...

This rocker panel molding hardware set is required to mount the rocker moldings, which mount underneath each door and run from the front fender to the rear wheel well. Mopar Authentic Restoration™ Produc t ...

Reproduction of the original hood lip molding mounting hardware designed for use with 1965-67 Dodge Coronet models. This set of 8 clips and 8 nuts mounts the molding to front edge of the hood. Size 10-24 x .73" with metal...

Reproduction of the original wheel opening molding designed for use on 1967-76 Dodge A-Body models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...

Reproduction trunk lid molding set for 1970-72 Dart and Scamp models. Reproduced in aluminum with bright finish as original. Designed to fit the factory trunk lid and quarter panel contours. Hardware sold separately. ...

Reproduction trink lid molding hardware set for 1970-72 Dart and Scamp models. Designed to fit factory and reproduction trunk lid moldings and body panels. Applications 1970-72 Dodge Dart 1971-72 Plymouth Scamp

Reproduction of the rear finish panel molding designed for the trunk of 1969 Dodge Dart GTS models. Each panel is manufactured in stamped aluminum, anodized and polished to perfection offering an authentic appearance and fit....

Reproduction windshield molding set for various 1970-76 models. This official Mopar Authentic Restoration Product features the correct stainless finish and contours for an original appearance and fit. Fits: 1970-76 Duster...

Reproduction vinyl top moldings for 1968-70 Charger models. Features reinforced mounting studs and correct chrome plating. These moldings mount on the inner and outer side of the sail panel and run from the lower back window...

Reproduction of the original style windshield reveal molding clip designed for use with 1967 Dart, Barracuda, and Valiant Dart models. This polished stainless clip installs in the corners of the front windshield molding. Sold...

Reproduction of the original quarter extension molding designed for use on 1970 Dodge Challenger models. Manufactured to original specifications in stamped aluminum replicating the original in fitment and appearance. Includes...

Reproduction rear window molding clip with screw for 1970 Dodge and Plymouth E-Body coupe. This molding clip is used to attach the rear window moldings to the body of the vehicle. Sold individually with screw. Replaces Mopar...

Reproduction of the original quarter extension molding designed for use on 1971-74 Dodge Challenger models. Manufactured to original specifications in stamped aluminum replicating the original in fitment and appearance....

Factory-style replacement hood lip molding for 1971 Dodge Challenger models. Mounts on the front edge of the hood and features the correct finish and includes the additional lip that extends under the front edge of the hood....

Factory-style replacement hood lip molding for 1970 Dodge Challenger T/A models. Manufactured to factory specifications to properly replace the original molding and features the correct finish and contours for an authentic...

Reproduction of the original wheel opening moldings designed for use on 1970-76 Mopar A Body models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...

Reproduction of the original wheel opening molding designed for use on 1968-70 Dodge Charger models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...

Reproduction of the original quarter extension molding designed for use on 1970 Dodge Challenger models. Manufactured to original specifications in stamped aluminum replicating the original in fitment and appearance. Includes...

Reproduction of the original aluminum front windshield molding set for all 1968-70 Mopar B-Body models. Each molding is reproduced to exact factory specifications and designed to replace the originals exactly. Replace the...