Dodge All Models Parts - Headlamps

Reproduction of the original headlamp opening switch designed for use on 1968-69 Dodge Charger models. Each switch is designed to operate the opening and closing of the headlamp doors. Features a cosmetically correct button....

Replace your standard "yellow light" headlamps with this unique looking diamond cut halogen headlamp for increased visibility, safety and a custom look. Features a bullet shapped center reflector. This headlamp installs much...

OER reproduction of the original 1970 Dodge Charger headlamp door assembly designed for use on 1970 Charger models with concealed headlamps. Each headlamp door assembly is manufactured in injection-molded ABS material and...

OER reproduction of the original 1972 Charger LH (drivers side) headlamp shield. Each shield is manufactured in black molded rubber same as original factory shield. Rubber headlight shield mounts to headlamp bezel with (16)...

OER® reproduction of the original 1971 Dodge Charger LH headlamp shield. The shield surrounds the headlamp to protect the surface behind them from dirt and debris. Manufactured in black molded rubber just like the original...

OER reproduction of the original 1970 Dodge Charger headlamp crank rod for use on models that included factory concealed headlamps. Includes a 2" slotted rod that acts as a pivot for the headlamp door. Manufactured in stamped...

OER reproduction of the original 1972 Charger RH (passenger side) headlamp shield. Each shield is manufactured in black molded rubber same as original factory shield. Rubber headlight shield mounts to headlamp bezel with (16)...

OER® reproduction of the original 1971 Dodge Charger RH headlamp shield. The shield surrounds the headlamp to protect the surface behind them from dirt and debris. Manufactured in black molded rubber just like the original...

OER reproduction of the 1972 Charger headlamp shields. They surround the headlamps to protect the surface behind them from dirt/debris and they attach using push on retaining clips (included). Manufactured in black molded...

OER reproduction of the original 1970 Dodge Charger headlamp door assembly designed for use on 1970 Charger models with concealed headlamps. Each headlamp door assembly is manufactured in injection-molded ABS material and...

OER reproduction of the 1970-71 Dodge Charger headlamp door bumpers for models with concealed headlamps. Manufactured in rubber just like the factory Mopar item. Sold as a set of four. One set required per car. Note: Coming...

OER reproduction of the 12-piece headlamp door hardware set for 1970 Dodge Charger. Set includes the (2) headlamp door stop adjusting screws, (2) small plastic bushings, and (2) large plastic bushings for headlamp door pivot...

Classic 5 ¾" Universal Hi/ Lo Beam LED Headlight Set. ECE certified with 4,000LM, 25W, 6,000k L.E.D. systems. The 1139 series is High/ Low Beam for use with a matching set of 153094 for quad-headlight vehicles. Features a...

Classic 5 ¾" Universal Hi/ Lo Beam LED Headlight Set. ECE certified with 4,000LM, 25W, 6,000k L.E.D. systems. The 1139 series is High/ Low Beam for use with a matching set of 153093 for quad-headlight vehicles. Features a...

Replace missing, cracked or brittle plastic headlamp socket pigtail assembly with this quality reproduction. This replacement, heavy duty 2-wire headlamp plug will replace the original plug on most vehicles equipped with dual...

OER reproduction of the 1971 Charger headlamp shields. They surround the headlamps to protect the surface behind them from dirt/debris and they attach using push on retaining clips (included). Manufactured in black molded...

OER reproduction of the 1973-74 Charger driver side, LH and passenger side, RH headlamp shield retainers. Manufactured in black injection molded plastic, just like the original factory item. This headlight shield retainer set...

These replacement headlamp splash shields are manufactured out of masticated rubber, with mounting hardware included. Mounts behind the headlamps to keep debris out of the engine bay. Made in USA

Improve light output and add style to the front end of your classic by replacing your 7" round sealed-beam headlamps with this 7" round, diamond clear conversion headlamp housing. These housings utilize bright and powerful H4...

These replacement headlamp splash shields are manufactured out of masticated rubber, with mounting hardware included. Mounts behind the headlamps to keep debris out of the engine bay. Made in USA

Add a new look to your classic car with these custom headlamps. Manufactured with a metal housing and glass lens to meet high quality standards. The 7" lamp features an inner one-piece chrome glare shield with black chrome...

These replacement headlamp splash shields are manufactured out of masticated rubber, with mounting hardware included. Mounts behind the headlamps to keep debris out of the engine bay. Made in USA

These replacement headlamp splash shields are manufactured out of masticated rubber, with mounting hardware included. Mounts behind the headlamps to keep debris out of the engine bay. Made in USA

OER reproduction of the 1973-74 Charger passenger side, RH headlamp shield. Manufactured in silver injection molded urethane, just like the original factory item. This headlight shield mounts to headlamp bezel with a plastic...

Reproduction of the original 1973-74 Charger drivers side (LH) headlamp shield retainer. Manufactured in black injection molded ABS replicating the original factory part. The headlight shield retainer mounts to headlamp...

OER reproduction of the 1973-74 Charger driver side, LH headlamp shield. Manufactured in silver injection molded urethane, just like the original factory item. This headlight shield mounts to headlamp bezel with a plastic...

These replacement headlamp splash shields are manufactured out of masticated rubber, with mounting hardware included. Mounts behind the headlamps to keep debris out of the engine bay. Made in USA

Headlamp bulb features a reinforced multi-surfaced aluminum reflector and rugged anti-vibration construction. Includes a Sylvania Halogen H4/HB2 12V 65/55W bulb. Replaces H6014/H6024 bulbs. SAE approved. Note: Headlamp...

Reproduction of the original 1973-74 Charger passenger side (RH) headlamp shield retainer. Manufactured in black injection molded ABS replicating the original factory part. The headlight shield retainer mounts to headlamp...

Reproduction of the original 1972 Dodge Dart and Demon headlamp bezel for use on RH passenger side. Each headlight bezel is manufactured in injection molded ABS plastic and finished in argent silver to factory specifications....

These replacement headlamp splash shields are manufactured out of masticated rubber, with mounting hardware included. Mounts behind the headlamps to keep debris out of the engine bay. Made in USA

These replacement headlamp splash shields are manufactured out of masticated rubber, with mounting hardware included. Mounts behind the headlamps to keep debris out of the engine bay. Made in USA

Attention to detail is important in any restoration and cutting corners by reusing old bezels can ruin the look of an otherwise nice restoration. Replace your damaged or missing originals with these high quality...

Reproduction of the original headlamp bezels designed for use with all 1969 Dodge Dart models. Manufactured from stamped aluminum with black accents as original. Features the correct shape, contours and correctly placed...

OER reproduction of the original 1970-71 Dodge Dart and Demon headlamp bezel for use on RH passenger side. Each headlight bezel is manufactured in black injection molded ABS plastic, and finished in argent silver in the...

OER reproduction of the 1973-74 Charger LH - driver side and RH - passenger side headlamp shields. Manufactured in silver injection molded urethane, just like the original factory item. These headlight shields mount to...

Reproduction of the original headlamp bezels designed for use with all 1969 Dodge Dart models. Manufactured from stamped aluminum with black accents as original. Features the correct shape, contours and correctly placed...

This replacement sealed beam headlamp bulb is perfect for maintaining the factory appearance and performance when the original burns out.

This replacement sealed beam headlamp bulb is perfect for maintaining the factory appearance and performance when the original burns out.

Reproduction of the original 1972 Dodge Dart and Demon headlamp bezel for use on RH and LH sides. Each headlight bezel is manufactured in injection molded ABS plastic and finished in argent silver to factory specifications. ...

Attention to detail is important in any restoration, and cutting corners by reusing old headlight bezels can ruin the look of an otherwise nice restoration. Manufactured in stamped aluminum with a black center fill to OE...

This OER® Authorized wiring harness set upgrades the stock headlamp wiring on your vehicle to provide your new bulbs with maximum power and decrease the chance of overloading the stock wiring and connectors. Power will...

Reproduction of the original 1972 Dodge Dart and Demon headlamp bezel for use on LH drivers side. Each headlight bezel is manufactured in injection molded ABS plastic and finished in argent silver to factory specifications. ...

This OER® reproduction grill nut/headlamp bezel retainer set is designed to replicate the grill nut that secures the headlamp bezel to the grill. Each set includes 4 of the correct nylon nuts that are required to complete...

High Intensity Discharge (HID) headlamp bulbs are much brighter than conventional halogen bulbs, while providing tight light focus for better light distribution. They require 35 watts and use an external regulator, but will...

Reproduction of the original headlight bezels designed for use with 1968 Dodge Dart models. Each headlight bezel is manufactured from quality stamped aluminum and features correct black accents offering an original appearance...

OER reproduction of the original 1970-71 Dodge Dart and Demon headlamp bezel for use on LH drivers side. Each headlight bezel is manufactured in black injection molded ABS plastic, and finished in argent silver in the accent...

Reproduction of the original headlamp bezels for use with 1971 Dodge Challenger RT models. Each bezel is manufactured in quality stamped aluminum replicating the original in design, appearance, and fitment. Attention to...

These electric headlamp actuators are a direct bolt in replacement for defective vacuum systems on 1968-69 Dodge Charger models with retractable headlamps. This plug & play system uses a control module that works with the...

OER reproduction of the original 1970-71 Dodge Dart and Demon headlamp bezel for use on RH and LH sides. Each headlight bezel is manufactured in black injection-molded ABS plastic, and finished in argent silver in the accent...

Reproduction of the original headlight bezels designed for use with 1968 Dodge Dart models. Each headlight bezel is manufactured from quality stamped aluminum and features correct black accents offering an original appearance...

Reproduction of the original hidden headlamp door actuator designed for use on 1968 Dodger Charger models. Repair the concealed headlamps on your 1968-69 Charger or 1970 Superbird with this authentic reproduction actuator....

Reproduction of the original headlamp bezels designed for use with 1963-65 Dodge Dart models. Each bezel is manufactured in anodized aluminum and painted to correct factory specifications offering an authentic appearance....

This crystal headlamp with auxiliary LED's will give your classic ride a modern look. The aluminum reflector is a reinforced, multi-faceted design for maximum vibration resistance. Uses a replaceable HB2/9003 65/55W 12V...

This OER® reproduction headlamp bezel screw set is designed to replicate the 1971 Challenger headlamp screw tha t secures the headlamp bezel to the vehicle. Each set includes 10 of the correct chrome phillips head #8...

This crystal headlamp with auxiliary LED's will give your classic ride a modern look. The aluminum reflector is a reinforced, multi-faceted design for maximum vibration resistance. Uses a replaceable HB2/9003 65/55W 12V...

Reproduction of the original inner headlamp splash shields designed for use on 1970-74 Mopar E-body models. The shields are bolted behind the headlamp buckets and feature correct countours and mounting points. Sold in pairs....

OER® reproduction of the original "500" headlamp door emblem designed for use with 1970 Charger 500 models. Manufactured in quality die-cast zinc replicating the original in design and appearance. This emblem features a...

OER reproduction of the 1975-76 Dart LH & RH headlamp bezel set. Manufactured in stamped aluminum, anodized, and finished with black in the accent areas just like the original factory item.

Replacement sealed beam halogen headlamp for your burned out original. This halogen bulb is just what you need to keep your headlamps operational and up to date with modern day lighting. {fitment}